Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
6 Cards in this Set
- Front
- Back
step 1
|
Clean slide assembly with cloth. A soft brush and CLP can assist in removal of excess dirt and carbon buildup. Ensure the Decocking/safety lever, breech face, slide guides and extractor are free of excess dirt and residue.
|
|
Step 2
|
Wipe dry with a cloth and apply a light coat of CLP/LSA.
|
|
Step 3
|
Use cleaning Rod, insert cleaning patch soaked with CLP in chamber end of barrel and push out muzzle to remove loose firing residues and soften carbon deposits.
|
|
Step 4
|
Insert bore brush into chamber end of barrel, making sure it completely clears the muzzle before it is pulled back through the bore. Repeat several times to loosen carbon deposits.
|
|
Step 5
|
Wipe loose carbon deposits from bore with another clean patch soaked with CLP
|
|
Step 6
|
Dry the barrel by pushing a swab through the bore. Repeat as necessary until a clean swab is observed.
|