• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/17

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

17 Cards in this Set

  • Front
  • Back
Which of the follwoing is true regarding VLANs?
VTP is used to send VLAN information to switches in a configured VTP domain.
A switch has been configured for 3 different VLANs: VLAN2, VLAN3, VLAN4. A router has been added to provide communication between the VLAns. What type of interface is necessary on the router if only one connection is to be made between the router and the switch?
100 Mbps Ethernet
You want to improve network performance by increasing the bandwidth available to hosts and limit the size of the broadcast domains. Which of the following options will achieve this goal?
Switches configured with VLANs.
Which of the following protocols are used to configure trunking on a switch? (2)
802.1Q ; ISL
When a new trunk link is configured on an IOS-based switch, which VLANs are allowed over the link?
By default, all VLANs are allowed on the trunk.
Which switching technology reduces the size of a broadcast domain?
VLANs
What VTP mode allows you to change VLAN information on the switch?
Server
Which command will configure a switch port to use the IEEE standard method of inserting VLAN membership information into Ethernet frames?
Switch(config-if)#switchport trunk encapsulation dot1q
Which of the following is true regarding VTP?
All switches are VTP servers by default
Which protocol reduces the administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain?
VTP
Which of the following commands sets a trunk port on 2960 switch?
switchport mode trunk
Which of the following is an IEEE standard for frame tagging?
802.1Q
You connect a host to a switch port, but the new host cannot log into the server that is plugged into the same switch. What could the problem be?
The switch port the host is connected to is not configured to the correct VLAN membership.
Which of the following provided inter-switch VLAN communication. (2)
ISL ; 802.1Q
To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met? (2)
The VTP management domain name of both switches must be set the same ; One of the two switches must be configured as a VTP server
Which of the following are benefits of VLANs? (3)
The allow logical grouping of users by function ; The can enhance network secuirty ; They increase the number of broadcast domains while decreasing the size of the broadcast domains.
Which of the following modes are valid when a switch port is used as a VLAN trunk? (3)
Dynamic auto, Dynamic desirable; Nonegotiate