Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
|
An artificial nail made of ABS or tenite acetate polymer that is adhered to the natural nail to add length is called: |
Nail tip |
|
|
Nail tips are applied for the purpose of: |
Adding length to nail |
|
|
A tip is very weak without the addition of: |
An overlay |
|
|
In a nail tip application, an abrasive is used to: |
Remove surface shine |
|
|
The _____ serves as the point of contact with the nail plate. |
Nail well |
|
|
When handing nail adhesive, nail technicians should: |
Wear safety goggles |
|
|
The nail tips should cover no more than _______ of the natural nail. |
One-third |
|
|
Natural oil and shine are removed from the nail plate with: |
An abrasive |
|
|
Nail tips are attached to the nail plates by using a: |
Stop , rock, and hold procedure |
|
|
Softened nail tips are removed by: |
Sliding them off |
|
|
A thin, elongated board with a rough surface is called: |
An abrasive |
|
|
Nail-size pieces of cloth or paper that are bonded to the top of the nail plate with nail adhesive are called: |
Nail wraps |
|
|
A piece of fabric cut to completely cover a crack or break in the nail is called: |
A repair patch |
|
|
A thin, natural material with a tight weave that becomes transparent when adhesive is applied is: |
Silk |
|
|
An implement designed especially for use on nail tips is called a: |
Tip Cutter |
|
|
Acrylic liquid and powder, wraps, or UV gels are known as: |
Overlays |
|
|
The thickness of a nail adhesive i known as: |
Viscosity |
|
|
The product used to remove moisture and oil from the surface of the nail is called: |
A dehydrator |
|
|
Damage to the natural nail can be reduced when applying nail tips by: |
Pre-blending nail tips by: |
|
|
No-Light gels are hardened by applying a small amount of _______ on top of the enhancement: |
Activator |
