Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
37 Cards in this Set
- Front
- Back
|
Before a rivet is driven it should be extended |
1.5 times rivets diameter |
|
|
2 common types I’d ever head designs are |
Universal and countersunk |
|
|
Universal head number for a rivet |
AN470 |
|
|
The length of the universal countersunk is |
470 |
|
|
A rivet with the designation AN470AD5 |
4/32 |
|
|
What river has replaced all other rivers with protruding heads |
470 |
|
|
The rivet alloy 2117-T3 is identified by its what on its head |
Dimple |
|
|
What is meant by the term ice box rivets |
These rivets can become hard when they warm up to room temperature and may be reheated as many times as necessary without impairing strength |
|
|
What rivet is the crack free rivet |
2017T3 |
|
|
What is a blind rivet |
Finish |
|
|
Pop rivets are never used to |
Make structural repairs |
|
|
Cherry loc and hucklock rivets belong in what catergory |
Mechanical lock rivets |
|
|
Can cherry lock rivets be replaced with solid shank rivets ? |
Yes |
|
|
Hi shear rivets have the same strength characteristics as a standard |
AN bolt |
|
|
Can special fasteners , high strength and low weight be used to replace AN bolts and nuts |
Finish |
|
|
Name 3 types of lock bolts used in aviation applications |
Pull type blind type and stump type |
|
|
Lock bolts have a high tensile strength and cannot be used in shear |
False |
|
|
Lock bolts have a high tensile strength and cannot be used in shear |
False |
|
|
The hole made to accept a Taper lol fastener must be accomplished using a special |
Conical mandrel |
|
|
Lock bolts have a high tensile strength and cannot be used in shear |
False |
|
|
The hole made to accept a Taper lol fastener must be accomplished using a special |
Conical mandrel |
|
|
Jo bolts are designed to |
Gif close tolerance holes where high strength is critical factor |
|
|
Lock bolts have a high tensile strength and cannot be used in shear |
False |
|
|
The hole made to accept a Taper lol fastener must be accomplished using a special |
Conical mandrel |
|
|
Jo bolts are designed to |
Gif close tolerance holes where high strength is critical factor |
|
|
Rivnuts are designed to accept |
Machine screws |
|
|
Lock bolts have a high tensile strength and cannot be used in shear |
False |
|
|
The hole made to accept a Taper lol fastener must be accomplished using a special |
Conical mandrel |
|
|
Jo bolts are designed to |
Gif close tolerance holes where high strength is critical factor |
|
|
Rivnuts are designed to accept |
Machine screws |
|
|
Threaded fasteners1/4 inch in diameter are designated in |
Screw sixes not increments |
|
|
Lock bolts have a high tensile strength and cannot be used in shear |
False |
|
|
The hole made to accept a Taper lol fastener must be accomplished using a special |
Conical mandrel |
|
|
Jo bolts are designed to |
Gif close tolerance holes where high strength is critical factor |
|
|
Rivnuts are designed to accept |
Machine screws |
|
|
Threaded fasteners1/4 inch in diameter are designated in |
Screw sixes not increments |
|
|
C |
C |
