Cdc Set B Vol. 1

Front 1

001- Before using an electric drill, what is the first thing you should do?

Back 1

Make sure the diameter of the hole to be drilled is within the capacity of the drill

Front 2

001- The purpose of cutting lubricant in most drilling operations is to increase the...

Back 2

Drilling speed and the drill bit life

Front 3

001- Which minimum articles of safety gear must be worn when using a bench grinder?

Back 3

Eye and face protection

Front 4

001- An electric saw blade must be operating at what speed before it contacts the material being cut?

Back 4

Full

Front 5

002- How many pounds psi of clean, dry air is required at the tool end of the air hose to ensure the tool is operating safely and efficiently?

Back 5

90

Front 6

003- What condition would prevent an operator from applying power to a hoist or other powered lifting device?

Back 6

An AF Form 979 is attached to the unit

Front 7

003- What should be worn anytime there is a potential for injury from overhead objects during a lifting operation?

Back 7

Protective helmets

Front 8

003- What is the most common type of lifting sling used in the muns career field?

Back 8

Wire rope

Front 9

003- The following are all good safety practices to follow when using a lifting sling except

Back 9

Inspecting the sling by passing your bare hand over the body of the sling

Front 10

004- The annunciators displayed on the Fluke 8025-series multimeter are used to distinguish among...

Back 10

Ohms, kilohms, and megohms

Front 11

004- What are two operational modes of the Fluke 8025-series multimeter?

Back 11

Range and hold

Front 12

005- The steering system on the MHU-141/M trailer has a turning radius of how many inches?

Back 12

200

Front 13

005- When the MHU-141 trailer is loaded or towed with the hinged deck panels open, what must be done?

Back 13

The deck panel supports must be properly positioned and locked in place with quick release pins

Front 14

006- What is the maximum load capacity of the MHU-110/M trailer?

Back 14

15000 lbs

Front 15

006- The parking brake on the MHU-110/M trailer is applied by...

Back 15

Pulling either one of two hand levers located on each side of the front of trailer

Front 16

007- How many openings are on the deck of the MHU-226 trailer?

Back 16

Three

Front 17

007- What type of steering aids the MHU-226 in a tighter steering radius?

Back 17

Four wheel double Ackerman

Front 18

008- After 463L pallets are positioned on a rollerized trailer, what can you use to secure the pallets to the trailer?

Back 18

MB-1 chain assemblies/tie down straps

Front 19

008- What kind of movement supports on base activities to or from the flightline?

Back 19

Operational

Front 20

009- What munitions item is not loaded into transport modules by munitions personnel?

Back 20

20 mm

Front 21

009- What transport module used for decoy munitions has a maximum capacity of 30 magazines?

Back 21

ALE-50

Front 22

009- How often should the positive locking devices on the doors of munitions transport modules he checked?

Back 22

After loading, unloading, and periodically between stops

Front 23

010- The purpose of the transport beam beneath the lift arm assemblies on the MJ-1 series lift truck is to...

Back 23

Provide added support and to relieve hydraulic pressure from the lift arms when carrying loads for long distances

Front 24

010- What is the lifting capacity of the MJ-1 series lift truck?

Back 24

3000 lbs

Front 25

What is the lifting capacity of the MHU-83 series lift truck?

Back 25

7000 lbs

Front 26

010- When using the MHU-83 series lift truck with fork adapters, you immediately...

Back 26

Reduce its lifting capability by 1000 lbs

Front 27

010- What happens when you release the accelerator pedal on a vehicle driven with a hydrostatic transmission?

Back 27

The unit coasts to a stop very quickly

Front 28

010- What is the primary drawback to using the hydraulic hand pump to build hydraulic pressure on the MHU-83 series lift truck?

Back 28

Extremely slow way to build hydraulic pressure

Front 29

010- How is the yaw positioning from the cradle or boom controls of an MJ-1 lift truck adjusted?

Back 29

Manually

Front 30

011- What category or categories are Air Force air compressors classified?

Back 30

High/low pressure

Front 31

012- The primary difference between a bobtail and a pickup truck is the...

Back 31

Bobtail's back end is shortened by about one half

Front 32

013- What is the purpose behind good operator maintenance of all assigned vehicles?

Back 32

Maintain vehicle serviceability at reduced cost

Front 33

014- What is the maximum amount of pounds the MB-4 aircraft towing tractor can tow and push?

Back 33

140000

Front 34

015- Pintle safety locking pins must remain attached to the Pintle assembly...

Back 34

To prevent an unsecure pin from coming out and getting lost

Front 35

016- What gear range should be selected in a tractor with an automatic transmission while going downhill?

Back 35

Low range

Front 36

What is the purpose of the trailer hand valve (Johnson Bar)?

Back 36

Test the trailer brakes

Front 37

016- What are hose couplers (glad hands) used for on tractor/trailer combinations?

Back 37

To connect the service and emergency brake Airlines from the tractor to the trailer

Front 38

016- Which procedure is not a consideration for backing a tractor/trailer combination?

Back 38

Turn toward the passengers side

Front 39

017- What is the maximum depth of water you may drive a rough terrain forklift through?

Back 39

5ft

Front 40

017- What is the most beneficial attribute of using the swingmast forklift?

Back 40

Allows you to maximize the available storage space

Front 41

017- With the forks level, what is the maximum reach of the variable reach forklift?

Back 41

22ft

Front 42

018- What USAF gun system is loaded/unloaded by LALS?

Back 42

The M61A1, 20mm cannon

Front 43

018- Which weapons replaceable assembly of the LALS has no moving parts?

Back 43

Storage container

Front 44

019- Which subassembly of the UALS houses a remaining indicator window that provides the means to visually determine the approximate number of rounds in the unit?

Back 44

Outer drum

Front 45

019- Which subassembly of the UALS provides the means to load live rounds into the aircraft gun system?

Back 45

Interface unit

Front 46

019- Which subassembly of the UALS provides the power that cycles the rounds through the system?

Back 46

Pneumatic regulator

Front 47

020- How often should UALS replenisher assemblies be inspected?

Back 47

Every 30 days when in use and annually when in storage

Front 48

020- Which subassembly on the UALS replenisher assembly prevents accidentally loading a spent cartridge into the loader assembly?

Back 48

Empty space preclusion device

Front 49

020- Which tool can initiate cycling ammo through the UALS replenisher manually?

Back 49

1/2 inch speed wrench

Front 50

020- What happens to the unfired rounds returning from the loader when the linked ammo is being processed?

Back 50

Automatically downloaded through the second gate in the bottom of the replenisher

Front 51

021- Which 30mm cannon is internally mounted in the A-10 aircraft?

Back 51

GAU-8/A

Front 52

021- Which 30mm ammo loading system is used to service the GPU-5/A gun pod?

Back 52

GFU-10/E

Front 53

022- Which component of the MAC can be used as a forklift adapter to raise the gantry to full height?

Back 53

ICB

Front 54

022- What is the weight capacity of the pneumatic hoists that are attached to the gantry's I-beam of the MAC?

Back 54

4000 lbs (A/E32K-3, MAC), 6000 (A/E32K-9, MAC II)

Front 55

022- The triple bomb bar is fitted with bomb slings and is used with each hoist to provide for lifting...

Back 55

Three 500lb munitions at a time or two 2000lb munitions items

Front 56

023- Which TO covers the rapid assembly and inspection procedures of nonnuclear munitions?

Back 56

11A-1-63

Front 57

023- What is the minimum number of feet required to assemble the A/E32K-3, MAC?

Back 57

50 x 100

Front 58

023- Why is it important to monitor NEW during a bomb buildup operation?

Back 58

If ignited, excessive NEW may cause propagation of an explosive from one location to another

Front 59

023- When packing up the MAC it is important to cap the ends of the air hoses to keep...

Back 59

Foreign materials from damaging them

Front 60

024- What does Title 49 of the code of federal regulations regulate?

Back 60

Shipments of hazardous material, including explosives within the US

Front 61

024- Which approved restraining devices can be used for securing muns on USAF vehicles/trailers?

Back 61

Chains/binders, cargo nets, and tie down straps

Front 62

024- When is it permissible to transport explosives in POVs?

Back 62

Never

Front 63

024- What is the primary focus when designating primary and alternate explosives movement routes?

Back 63

Use the safest possible routes

Front 64

025- What source is best used to determine the explosive hazard class/division of a specific munitions item?

Back 64

JHCS

Front 65

026- What should you do if a conflict is discovered while using TO 11-1-38 between the illustrations and the written procedures?

Back 65

Follow the written procedures

Front 66

026- Even though TO 11-1-38 has its own safety section, what other publication should you reference for safely transporting explosive items on base?

Back 66

AFMAN 91-201

Front 67

026- what type of info is given in the general notes on the first card of each trailer and weapon type section in TO 11-1-38 and is required to be reviewed?

Back 67

WARNINGS, CAUTIONS, & NOTES pertaining to each trailer and weapon

Front 68

026- If you cannot fully close the load binder handle by hand,

Back 68

Adjust the load binder hooks on the chain

Front 69

026- What chapter of TO 11-1-38 covers configuration of the MHU-141 munitions trailer?

Back 69

One

Front 70

026- What piece of equipment must be used with the MHU-110 to prevent the trailer from becoming unstable while using the rail extenders for loading/unloading heavy munitions?

Back 70

Stabilizer jack

Front 71

026- What can be constructed and attached to the bed of a 40-ft trailer to facilitate support of rounded munitions?

Back 71

Wooden rail sets

Front 72

027- What provides an itemized list of all equipment authorized for use with nuclear weapons?

Back 72

Master nuclear certification list

Front 73

027- Once verified that an item is nuclear certified, how is it identified as such?

Back 73

Positive identification by nameplate, label, appropriate markings, or by official documents

Front 74

027- Which statement about pintle hooks and their use in operations with nuclear weapons is correct?

Back 74

Original equipment pintle hook assemblies are authorized

Front 75

027- Which items do not require nuclear safety certification for use in operations with nuclear weapons?

Back 75

General purpose hand tools

Front 76

028- When should you replace a nuclear certified MB-1 tie down/chain assembly item?

Back 76

After finding any cracks, bent/worn parts, or excessive corrosion

Front 77

028- Which action is not an authorized method for securing loose lengths of chain when using the MB-1 tie down device/chain assembly?

Back 77

Wrap the loose ends around the tie down device and secure to the quick release lever

Front 78

028- When using a load binder for securing a load what's the main reason for not using a cheater bar or extension tool to fully close the handle?

Back 78

It would place too much pressure on the load/tie down points

Front 79

028- When specifically authorized for transporting nuclear weapons and material, how many CGU-1/B tie down straps need to be used as a substitute for every one MB-1 tie down assembly?

Back 79

2

Front 80

029- What are the key factors to consider during a nuclear weapons movement?

Back 80

Safety and security

Front 81

029- Which area is designated as a location used temporarily during a delay of an off base movement involving nuclear weapons?

Back 81

National defense

Front 82

029- What code word is used when DOE convoy seeks sanctuary during an emergency?

Back 82

Safe Haven

Front 83

029- When are nuclear weapons moved by convoy?

Back 83

Every time weapons are moved

Front 84

029- What is the most difficult job for escort guards during a convoy?

Back 84

Keeping other vehicles from entering the convoy