Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
18 Cards in this Set
- Front
- Back
What's the function of the Power Control Logic CCA?
|
Providing enable signals to the Power Control Relays and staus indicators.
|
|
What's PWM?
|
Time-encoded data format where the pulse width determines the logic level.
|
|
What is the result of the TMA using CIIL?
|
PATEC appears to the ATE as one instrument on one IEEE
|
|
The HP 5350 microwave frequency counter uses automatic amplitude discrimination to do what?
|
measure the frequency of the highest amplitude signal in the multi-signal enviornment.
|
|
How is power sense switch used during self-test?
|
routes sense and voltage monitor signals to the 4 wire bus
|
|
Why are the DC power supply sense signals routed to the 4 wire bus?
|
makes power supply outputs availible to the test station for diagnostic testing
|
|
List the items that make up the power distribution group
|
power supplies, control circuits, distribution network
|
|
How does the ARC-190 generate the frequencies nedded?
|
they are derived from a temperature compensated oscillator
|
|
How are the ouput signal characteristics determined and controlled in the 5.6kHz power source?
|
AC power supply programmer interfaces with the test station computer assembly via an IEEE
|
|
What is the source of the drive signals used to produce PM in the RF synthesizer?
|
STB
10 MHz Ref STG from the SIM |
|
what does the VT1802 provide for the station?
|
120 single or 60 different discrete digital channel
|
|
The HP 80000 data generator system is used for what?
|
characterize or emulate fast ICs, modules, components by generating data in to form of PRWS and PRBS
|
|
During DC measurment, how does the LF measurement CCA condition the input signal?
|
amplified or attenuate to produce an output in the range of 2VDC
|
|
What aspects of the 1232-A tuned amplifier and null detector enable the user to request brodband noise and harmonics that interface with the measurements?
|
tunability and choice of bandwidth
|
|
What makes up AC1 supply?
|
3 single pahse AC supplies
|
|
What is the purpose of the HP 5364A mixer detector?
|
take a RF signal input and documents it into an IF signal
|
|
How is the computer linked to the components of the DSS?
|
TMA processor CCA
TMA LLU/IF CCA |
|
Why are the MLS operating frequencies in the microwave range?
|
help reduce sensitivity to interfering signals and site topography
|