Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
|
When redistributing into OSPF, the default route type is |
O E2 |
|
|
What is the default seed metric when redistributing into OSPF for everything other than BGP? |
20 |
|
|
When redistributing into EIGRP, external EIGRP routes have a default administrative distance of? |
170 |
|
|
TRUE/FALSE
If IGRP and EIGRP use the same Autonomous System then redistribution occurs automatically. |
TRUE |
|
|
Which three steps are most helpful in verifying proper route redistribution? (Choose three)
B. On the ASBR router performing the route redistribution, use the show ip protocol command to verify the redistribution configurations.
C. On the ASBR router performing the route redistribution, use the show ip route command to verify that the proper routes from each routing protocol are there.
D. On the routers not performing the route redistribution, use the show ip protocols command to verify the routing information sources.
E. On the routers not performing the route redistribution, use the debug ip routing command to verify the routing updates from the ASBR. |
A B C
|
|
|
A router is configured for redistribution to advertise EIGRP routes into OSPF on a boundary router. Given the configuration:
|
Seed Cost |
|
|
TRUE/FALSE
In a NSSA (not so stubby area), redistributed RIP routes will not be allowed. |
TRUE |
|
|
TRUE/FALSE
After the router rip and passive-interface s0/0 commands have been issued, the s0/0 interface will not send any RIP updates, but will receive routing updates on that interface. |
TRUE |
|
|
TRUE/FALSE
When you use the passive-interface command with EIGRP, hello messages are sent out the specified interface. |
FALSE |
|
|
TRUE/FALSE
When you use the passive-interface command with OSPF, hello messages are not sent out the specified interface. |
TRUE |
