• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/16

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

16 Cards in this Set

  • Front
  • Back

Which characteristic of the network layer in the osi model allows carrying packets for multiple types of communication among many hosts

The ability to operate without regard to the data that is carried in each packet

What are the two characteristics of ip

Does not require a dedicated end to end connection



Operates independently of the network media

When a connection less protocol is in use at aa lower layer of the osi model how is missing data detected and retransmitted if necessary

Upper layer connection orientated protocols keep track of the data

Which field of the ipv4 header is used to prevent a packet from traversing a network endlessly

Time to live

What ipv4 header field identifies the upper layer protocol carrier in the packet

Protocol

What is one advantage that the ipv6 simplified header offers over ipv4

Efficient packet handling

What type of route is indicated by the code c in a ipv4 routing table

Directly connected route

What routing table entry has a next hip address associated with a destination network

Remote roots

Which statements describes a hard wear feature of cusco 1941 router that has a default hardware configuration

It has two types of ports that can access the consol

Following default settings what is the next step in the router boot sequence after the is loads from flash

Locate and load the startup config file from nvram

What are two types of router interfaces

Lan



Wan

Which two pieces of information are in the ram of a cisco router during normal operations

Cisco is



Ip routing table

A router boots and enters setup mode what is the reason for this

The configuration file is missing from nvram

What is the purpose of the startup configuration file on a cisco router

To contain the commands that are used to initially configure a router on startup

Which three commands are used to set up secure access to a router through a connection to the console interface

Line consol 0



Password cisco



Login

Which characteristic describes an ipv6 enhancement over ipv4

The ipv6 header is simpler than the ipv4 header is which improves packet handling