Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
11 Cards in this Set
- Front
- Back
What are tWO ways TCP uses the sequence numbers |
1. To identify missing segments at destination 2. To reassemble at the remote location |
|
2. The quantity of data segments, measured in bytes that the transmitting machine is allowed to send without receiving an acknowledgment is called a______________. |
Window |
|
____________________ is a device that operates on Data Link Layer. |
Switch |
|
If you configure the address 192.168.10.5 255.255.255.248 on a router’s interface and get the error:Bad mask for /29 for address 192.168.10.5What is causing this error? |
The router does not have ip subnet-zero enabled |
|
_______________ protocol is used to collect information of locally attached devices. |
CDP |
|
Which command is used to set or change the time on a Cisco router? |
Clock set |
|
____________ command displays IP – to –MAC address mappings on a Cisco Router |
show ip arp |
|
___________________ algorithm is used on the Ethernet Network to avoid collisions ( CSMA/ CD) |
Jamming |
|
Which of the below work on the Application or Process Layer? |
HTTP DNS |
|
_____________________ is used in switches for solution to loop avoidance |
STP (Spanning Tree Protocol) |
|
Which of these is not a feature of RIPv1 routing protocol? |
Classless routing |