• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/20

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

20 Cards in this Set

  • Front
  • Back

Fenestration in general, and windows in particular, affect efficiency and comfort through four specific principles: radiation, convection, conduction and ______

air leakage

Four ways heat flows through windows are by radiation, convection, ______ and conduction

air leakage

____ are inert gases that are commonly added to the air space between glass panes in insulated glass to lower the U-factor

argon and krypton

_____ is a good conductor, so any window of this type should have a thermal break in the sash as well as the frame to reduce heat transfer

metal

Hinged units are referred to as ____ or awning windows, depending on whether or not they swing from the side or top

single hung

Aluminum screening can be considered a more environmentally friendly product than flexible ____, which is coated with soft PVC that is manufactured with harmful phthalates

fiberglass

Most weatherstrip is made of _____, which provided a long-term flexible air moisture seal

PVC

Many designers and owners prefer grilles or _____, the bars that create the look of individual panes of glass in a sash, in new windows that mimic the look of old windows with small individual panes or lites

muntins

_____ windows should be avoided in shower areas

wood

After windows, doors, and skylights are installed, the space between the frame and the structure must be sealed against air infiltration. This is typically accomplished with ____ insulation designed specifically for this purpose

Low-expansion spray foam

_____ is the measurement of heat loss of a particular window. It is the mathematical inverse of the R-Value

U-Value

____ refers to a microscopic metal film that is applied to the glass surface

Low-E coating

_____ is often used where light is desired but a view is not needed. Their size should be limited sue to their poor insulation value

Glass block

Wood windows are generally aesthetically pleasing; however they require regular ______

Maintenance

______ is a relatively efficient alternative to conventional skylight

Tubular day lighting device

_______ is an operable window with a sash hinged at the top that swings ouotward

Awning window

_____ is an insert gas that is commonly added to the air space between glass panes to lower the U-factor

argon

_____ are the actual bars that comprise a grille and divide the sash frame into smaller lites of glass

muntins

The heat provided by solar radiation if called _____

solar gain

The movement of heat as infrared energy though glass is called

radiation