Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
154 Cards in this Set
- Front
- Back
|
(CONTROL SHIP) Romeo at the dip |
Am steady on course and speed and am preparing to receive you on side indicated |
|
|
(APPROACH SHIP) Romeo at the dip |
Am steady to come alongside |
|
|
(CONTROL SHIP) Romeo close up |
Am ready for your approach |
|
|
(APPROACH SHIP) Romeo close up |
Am commencing approach |
|
|
Romeo hauled down |
When messenger is in hand |
|
|
Prep at the dip |
Expect to disengage in 15 minutes |
|
|
Prep close up |
Replenishing completed; am diengaging at final station |
|
|
Prep hauled down |
All lines clear |
|
|
When fuel or explosives are being transferred, what flag is flown |
Bravo |
|
|
Bravo at the dip |
Have temporarily stopped supplying |
|
|
Bravo close up |
Fuel or explosives are being transferred |
|
|
Bravo hauled down |
Delivery is complete |
|
|
When the receiving ship has a complement if 50 personnel or less, what ship is responsible for furnishing and hand tending all phone lines? |
Delivery |
|
|
What class of ships are responsible for furnishing all shot lines? |
CVN, LHA OR LHD |
|
|
Optimal separation distances between delivery and receiving ship during intitial tensioning is? |
140-180 ft |
|
|
An accelerated standard breakaway using an orderly and pre-arranged procedure. The objective is to disengage quickly without damaging the rigs or endangering personnel |
Emergency Breakaway |
|
|
How many wire rope cutters are required at each STREAM solid cargo transfer station on an UNREP delivery ship? |
Two |
|
|
What is the allowable size of the easing-out line? |
12-21 thread manila |
|
|
Emergency Breakaway is indicated by at least how many blasts of the ship's whistle? |
Five short blasts |
|
|
Emergency Breakaway markers shall be displayed where they can be readily observed by receiving ships using what color letters and what color background? |
Red letters and white background |
|
|
What type of wire rope is used in fuel and cargo rigs? |
Type I, general purpose, Class 3, construction 6, 6x37, IWRC, extra-improved plow steel, preformed, regular right-hand lay |
|
|
The MK 87 Mod 1 line-throwing rifle adapter kit is used on what types of rifles? |
M14, M16 and M16A1 |
|
|
During night unrep, what color chem light must be used to illuminate the shotline projectile? |
Orange |
|
|
The station-to-station phone line and the lead line messenger for the "P&D" line are attached to the messenger at a minimum distance of _____ from the smaller end? |
200 feet |
|
|
The spanwire or highline is stopped to the messenger at a minimum distance of ____ from the larger end. |
350 feet |
|
|
What forms the bitter end of the messenger? |
5-inch soft eye splice |
|
|
Whats the size of the markers on the P&D line? |
8x10 inches |
|
|
How large should the numerals be on the P&D markers? |
5 inches high |
|
|
What color is the numeral on a red or blue marker? |
White |
|
|
What color is the numeral on a green marker? |
Yellow |
|
|
What color is the numeral on a yellow marker? |
Green |
|
|
What color is the numeral on a white marker? |
Blue |
|
|
At night, what markers are indicated with 2 blue chem lights? |
60,100,140 and 180 |
|
|
What is optimal unrep speed? |
12-16 knots |
|
|
How long is the lead line messenger? And what type of line is it? |
200 feet 3/4 inch Nylon |
|
|
What size pelican hook is utilized when using either the Robb coupling or NATO coupling? What size is the cotter pin used to secure it? |
1-inch fueling-at-sea, lightweight pelican hook Steel 3/16x3 inch |
|
|
What size pelican hook is used to secure the highline to the long link on the receiving station's fixed padeye, sliding padeye or pendant? Shall be used with the STREAM rig. What size is the cotter pin used to secure it? |
1-3/8 inch pelican hook Steel 1/4x3 inch |
|
|
How far should you spread a cotter pin to properly secure it? |
About 3/8 inch |
|
|
What circuit is utilized for communications during unrep? |
70MC |
|
What does this transfer station marker indicate? |
F76 and F44 |
|
International Orange |
Missles |
|
Green |
Ammunition |
|
Red |
Fuel Oil |
|
Blue |
Diesel Oil |
|
Red and Blue Triangles |
F76 |
|
Yellow and Blue Triangles |
F44 |
|
Black, Yellow Quarters |
Lube Oil |
|
White |
Feedwater |
|
White with Blue Letter "P" Centered |
Potable Water |
|
Green with White Vertical Stripes |
Stores |
|
Green with White Letter "P" Centered |
Personnel and/or Light Freight |
|
Red/Yellow & Blue Triangles |
Fuel Oil and F44 |
|
Green with White Letter "B" Centered |
Bridge-to-Bridge Phone/ Distance Line |
|
|
How big are the transfer station markers? |
3ft x 3ft |
|
|
Whats the specifications of the bulb used to illuminate the night light box? How many bulbs are utilized? |
25-watt shielded bulb 2, one is stand-by |
|
|
What size paddles are utilized for hand signals? |
12x12 inch or 12 inch diameter |
|
|
What color and size of stripe runs diagonally from upper left to bottom right corners of the green signal paddle? |
1-inch wide, white stripe |
|
|
Ships engaged in alongside replenishment shall display the required day shapes during daylight hours from a vantage point that can be seen for a distance of at least how many miles? |
Two |
|
|
Deck edge corners, elevator corners, torpedoes and gun mounts should be marked with what color chem light and how many? |
One red chem light |
|
|
Vertical stanchions, boom guys,preventer wires, elevator cables, and other obstructions that form the limits if open area available for working at the receiving station should be marked with what color chem light and how many? |
3 red chem lights, 6 inches apart in a vertical line |
|
|
The deck edge or highest obstruction outboard at the receiving station should be marked with what color chem lights and how many? |
6 red chem lights secured to a 6" x 12' long white strip of canvas OR a 12ft piece of 21-thread manila or 1-1/2 inch nylon line spaced 24" apart with the first and last lights 12" away from the ends. |
|
|
How many chem lights should be secured to the hose saddles of the fuel rig and where? |
3 blue chem lights secured in line, on the side or end of the saddle facing the delivery ship |
|
|
How many chem lights should be secured to the hose spanwire free trolleys and where? |
1 blue chem light on each side of the trolley |
|
|
How many chem lights should be secured to the No.1 (retrieving) saddle whip and where? |
1 blue affixed to a ring or shackle, which a 3/4 " safety anchor shackle between it and the retriever attachment |
|
|
How many chem lights should be secured to a coupling or hose end? |
3 blue chem lights on each Robb coupling, around the hose and just behind the hose adapter |
|
|
Where should the blue chem light be attached on the messenger? |
One at the point of attachment to the shotline and adjacent to the identification tag |
|
|
Where should the blue chem light be attached to the station-to-station phone line messenger, return line messenger and P&D line messenger? |
Adjacent to the identification tag |
|
|
How many and Where should the chem lights be placed on a trolley for personnel/ cargo transfer? When transferring a litter? |
4 blue chem lights on each side in a horizontal line. Green chem lights on the floatation cover |
|
|
How many chem lights go on the end of the highline? |
1 blue chem light on each side of the end fitting |
|
|
Where should the chem lights be on the cargo hook tag line? |
One blue chem light at the lower end |
|
|
Where should the chem light be on the transfer dolly, missle canister or container? |
One blue chem light on each lower corner |
|
|
Where should the chem lights be placed on the personnel transfer chair? |
One blue chem light on each corner, top and bottom |
|
|
Receiving stations shall rig 3 lights tied together at each forward and aft side of, and on a horizontal line with, the attachment point for: |
1) highline pelican hook 2) fuel spanwire pelican hook 3) outhaul/ messenger block padeye or link |
|
|
Low-level yellow floodlights shall be a minimum of ____ watts |
150 |
|
|
This is a fitting designed to fail at a predetermined load to prevent deformation of the supporting structure or damage to the rig |
Weak link |
|
|
This is a device built into a wire rope winch drum designed to slip at a preset load |
Slip clutch |
|
|
When the static-tested load for the attachment point is less than the breaking stength of the transfer rig to be used, a ____ or _____ shall be employed |
Weak link or slip clutch |
|
|
What does STREAM stand for? |
Standard Tension Replenishment Alongside Method |
|
|
The static tested load of the spanwire attachment point |
36,000 lbs |
|
|
The static tested load of the messenger padeye |
9,000 lbs |
|
|
The static tested load of the riding line padeye/ cleat |
15,000 lbs |
|
|
The static tested load of the jigger tackle padeye |
12,000 lbs |
|
|
The static tested load of the jigger tackle cleat |
3,000 lbs |
|
|
The static tested load of the easing-out line padeye, staple, and cleat |
2,700 lbs |
|
|
The static tested load of the probe stowage tie-down padeye, staple and cleat |
600 lbs |
|
|
Whats the minimum length in feet of the spanwire? |
900 feet |
|
|
Whats the minimum length in feet of the saddle whip |
450 feet |
|
|
The messenger return line is a minimum of ____ feet made with ____inch nylon and is fitted on one end with a ____ inch soft eye with a brummel hook. |
300 feet 2-1/4 inch 3-inch |
|
|
The remating line is required on what type of receiving station |
Double probe |
|
|
The remating line shall be a minimum of ___ feet long made of ___ inch nylon line |
60 feet 3-inch |
|
|
For single probe rigs, the _____ section of the messenger serves as the remating line |
60 foot |
|
|
The easing out line is made up of what type of line? |
12-21 thread manila with whipped ends |
|
|
This strap assembly is a 1-1/8-inch nylon line with steel safety snap hooks at each end |
Long and short strap |
|
|
How long is the short strap and what is it used for? |
18-inch Used on double probe rig when disconnecting the messenger and hooking up the remating line |
|
|
How long is the long strap and what is it used for? |
42-inches Used if the messenger has twists around the spanwire |
|
|
What type of line is the only authorized line for riding lines |
Manila |
|
|
A riding line is required for the _____ coupling when the probe receiver is not available |
NATO |
|
|
The standard riding line is ____ inch manila line, ____ to ____ feet long. A thimble eye splice with a ____ inch pear-shaped link is inserted in one end of the riding line. |
4-inch 25-45 feet 3/4 inch |
|
|
The two-fold purchase consists of two ___ inch wood or metal blocks with ____ inch manila line |
7 or 8 inch 2-1/2 inch |
|
|
What is the length of the standard hose used in fuel STREAM rigs |
35 feet |
|
|
How long is the Type A Flow-Through hose saddle and where is it used |
19 inches Used in the single hose rig and for the lower hose in the double hose rig |
|
|
How long is the Type B Flow-Through hose saddle and where is it used |
32 inches Used for the upper hose in a double hose rig |
|
|
On a hose coupling, which end incorporates a rubber O-ring for sealing the joint |
Female end |
|
|
Study this! |
|
|
How many pounds is required to seat the probe |
300 lbs |
|
|
How many pounds is required to unseat the probe |
2500 lbs + or - 500 lbs |
|
|
The receiver hose assembly is a steel-reinforced, ____inch diameter hose with a male hose coupling and adapter to ___inch flange connector at one end and a female hose coupling at the other end. It is ___ feet long and connects the receiver to the fuel riser |
7 inch 8 inch 8 feet |
|
|
Study!!! |
|
|
Study!!! |
|
|
When the probe is properly seated, the indicator flags will raise to approximately how many degrees above the horizontal? |
30° |
|
|
Study!!! |
|
|
Due to contamination, do not leave a potable water hose on an UNREP rig longer than ___ or leave water in the potable water hose |
One Day |
|
|
New potable water hoses should be painted what color on the end of the coupling, caps, and plugs? |
Dark Blue |
|
|
The potable water hose should be labeled "Potable Water Only" every ____ feet. |
10 |
|
|
New potable water hoses and fittings should be soaked for at 2 min in a solution containing at least ____PPM of ____ |
100 ppm of free available chlorine (FAC) |
|
|
How many pounds is required to disconnect the 2-1/2 inch hose rig? |
500 |
|
|
The 2.5 inch hose rig is designed with a pumping rate of ____gallons per hour |
15,000 |
|
|
How can you tell the difference between a male or female end of the two and a half inch hose? |
The female end incorporate a rubber o-ring seal |
|
|
Study |
|
|
Study |
|
|
What does SURF stand for? |
Standard underway replenishment fixture |
|
|
What type of ships station configuration utilizes the Highline and hauling Lines with standard underway replenishment fixture (SURF) and trolley with Gullwing strong back? |
Sliding Padeye Station |
|
|
What type of ships station configuration utilizes the Highline and hauling lines with surf and trolley with cargo drop reel? |
Fixed Padeye Station |
|
|
What type of ship station configuration utilizes the Highline and hauling Line with surf and star attachment and trolley with cargo drop reel? |
Fixed Padeye without Access for 2 riggers |
|
|
What ship station configuration utilizes the Highline with star attachment and hauling Line with surf and trolley with cargo drop reel? |
Pendant Station or Stream Support Leg |
|
|
What is the diameter of the stream highline? |
1 inch |
|
|
The stream highline is tensioned to how many pounds? |
19,500 lbs |
|
|
How often are stream highlines replaced? |
Every 24 months |
|
|
What is the maximum designed cargo stream load capacity? With max sea state and ship separation? |
Max load- 5,700 lbs Sea state- 5 Ship separation- 200 ft |
|
|
Loads weighing over 5,700 lbs is called a ___ ____ |
Jury rig |
|
|
Jury rigs can only be used in calm seas (sea state? ) and the ship's must hold close separation (feet? ) |
0-3 sea state 100-120 feet of separation |
|
|
What is the diameter and length of the highline? |
1 inch and 800 feet |
|
|
What is the length and diameter of the inhaul? |
1/2 or 3/4 inch 800 feet |
|
|
What is the length and diameter of the outhaul? |
1/2 inch 1,200 feet |
|
|
For every ___ psi of air from the ram tensioner, there is about ___ lbs of tension in the highline. |
100 psi 》1,000 lbs |
|
|
The major reason for tension control in the hauling winches is to prevent a ___ condition causes by ship movement during transfer. |
Tightline |
|
|
The CDR has a max load capacity of how many pounds? |
5,700 |
|
|
How many pounds of pull is required to release the break on the CDR? |
50 lbs |
|
|
The sliding padeye is statically tested to how many pounds? |
50,000 lbs |
|
|
A minimum of how many personnel should be assigned to hand tend the inhaul and outhaul lines for personnel transfer? |
10 |
|
|
A minimum of how many personnel should be assigned to hand tend the highline for personnel transfer? |
25 |
|
|
How long is the wire preventer used on the trolley block for personnel transfer? |
2 feet long, and 1/2 inch diameter |
|
|
How long is the tag line on the stokes litter? |
12 feet of 2-1/4 nylon |
|
|
The maximum safe load for transfer by synthetic highline is how many pounds? |
600 lbs |
|
|
What are the dimensions of the synthetic highline and what type of line is it made of? |
4-inch doube braid at least 350 feet in length. |
|
|
What are the dimensions of the synthetic inhaul and what line is it made of? |
3-inch, plaited. At least 350 feet in length. |
|
|
What color are the MK-85 slings and used for what size loads? |
Red- for loads 13-31 inches high |
|
|
What color are the MK-86 slings and what size loads are they used for? |
Black- for loads 29-40 inches |
|
|
What is the color of the MK 87 slings and what size load are they used for? |
Green- for loads 36-50 inches |
|
|
What color are the MK 100 slings and what size loads are they used for? |
Yellow- for loads 48-70 inches high |
|
|
A relative wind of ___to___ knots is ideal for vertrep |
15-30 knots |
|
|
A relative wind bearing of ___to___ degrees is optimum fot vertrep |
330-030 degrees |
|
|
For night vertrep the receiving ship should be abeam at a distance of ___to___ yards |
300-500 yards |
|
|
For vertrep during day and night what is the number of hours considered to be the effective limit of pilot endurance? |
6-8 during day 2-3 at night |
