Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
12 Cards in this Set
- Front
- Back
bearing load is divided into what three types?
|
radial
thrust radial thrust |
|
what are the two main types of bearings?
|
plain bearing
anti-friction bearing |
|
roller bearings come in what three distinct shapes?
|
cylindrical
tapered barrel |
|
thrust bearings cannot support what kind of load?
|
radial
|
|
although bearings are designed to be extremely rugged, they are very sensitive to what three things?
|
corrosion
contamination abusive handling |
|
the hand can usually be held in contact with a surface below ? degrees fahrenheit
|
131
|
|
if temperature rises immediatly after start up in a grease bearing application...
|
it is most likely grease has slumped ino the races. stopping the unit and allowing te grease to cool in the channeled state will usually cure this condition
|
|
if the temperature rises immediatly after the bearing has been lubricated with grease..
|
the cause may be excessive quantity if grease or the wrong type..to avoid this condition, follow the correct lubrication procedure for both quantity and type
|
|
if the bearing is overgreased..
|
remove the drain plug and allow the excess to drain
|
|
if there is excessive loading of the bearing, excessive bearing preload, excessive shaft or housing interference, or external bearing overload...
|
check alignment during mounting and check for tight-fitting seals.
|
|
what are ten common problems associated with bearing failures?
|
scratching
erosion grooving plowing shallow embedment deep embedment corrosion electrolytes organic acids cavitation |
|
in bearings, what can cause false brinelling of the races?
|
the wearing away of material due to vibratory motion during storage or transport and corrosion due to lack of preservation compound on bearing surfaces
|