Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
50 Cards in this Set
- Front
- Back
Your department is responsible for cleaning all the areas listed on what documents?
|
the cleaning, preservation, and maintenance bill
|
|
Cleaning gear is stocked and issued from what area?
|
the first lieutenant's storeroom
|
|
When using cleaning agents, such as detergents, you should take what steps to ensure good cleaning results?
|
wetting, scrubbing, and rinsing
|
|
What is the definition of a field day?
|
a period when all hands thoroughly clean the ship inside and out
|
|
Field days accomplish what functions?
|
reduce the dirt intake caused by operating equipment, aid in the preservation of the ship by extending paint life, improve the appearance and sanitary condition of the ship
|
|
Vinyl deck coverings should be given what care frequently?
|
clamped down, dried, and buffed with a buffer
|
|
What material is added to nonslip deck coverings to provide better footing?
|
pumice
|
|
What type of inspection is taking place when the ship or station is divided into sections?
|
zone inspection
|
|
True or False. Solvents should NEVER be used in unventilated spaces under any circumstances.
|
true
|
|
When using solvents, proper ventilation must be provided in what areas?
|
voids, exterior spaces, and interior spaces
|
|
What precaution will reduce the possibility of vapor buildup in an area?
|
using extra fans for ventilation
|
|
When working with solvents in an enclosed space, you must take what precaution?
|
always use the buddy system
|
|
When using solvents, you must make sure that your personnel know the nearest escape route in case of fire and the location of the?
|
nearest fire alarm
|
|
Before starting a job that involves working with solvents, you should take what precautions?
|
Have the area checked by the gas free engineer and obtain the ventilation plan for the space involved
|
|
If you are told by the gas free engineer that harmful vapors have increased to unsafe levels in the area in which your detail is working, you should take what actions?
|
stop work immediately and clear the area until it is safe to return
|
|
Solvents spilled on some types of tile may cause what type of problem?
|
lung irritation
|
|
A spill must be reported if it presents a threat to the ship, the health of the crew, or involves more then what amount of solvent?
|
5 gallons
|
|
A sailor with a history of what medical problems should not be permitted to work with paint, solvents, and thinners?
|
asthma and allergies
|
|
If a solvent makes contact with a person's skin, the skin should be immediately flushed with what liquid?
|
Clear water
|
|
If someone has breathed vapors from solvents, what action should you take?
|
Get the sailor to a doctor as soon as possible
|
|
True or False. A SCBA contains a cartridge that may contain a chemical or carbon and it filters out spray mist and absorbs vapors.
|
True
|
|
In addition to the possibility of fire, what safety hazards may result if paint and solvent containers are not kept tightly closed?
|
The paints and solvents may evaporate causing loss of inventory
|
|
While inspecting containers of corrosive material being loaded aboard ship, you notice a dented can. What action should you take?
|
Refuse to accept the damaged container
|
|
If you discover a leaking solvent container while inspecting your storage area, what action should you take?
|
check for the type of solvent by reading the contents of the label and immediately inform your supervisor
|
|
When transferring solvents from one container to another, what type of equipment should you use?
|
a standard Navy transfer pump
|
|
When at sea, what method is approved for handling and disposing of empty solvent containers?
|
Stow the containers in a disposal storage area until your next port of call, then dispose of them properly
|
|
You are inspecting stored paint and solvents. If you're unsure whether a large-batch of paint is suitable for use, you should take what action?
|
Forward a sample to the nearest Navy testing laboratory
|
|
If you have what symptoms, the compartment you're working in might have bad air?
|
headache, dizziness, and labored breathing
|
|
True or False. While working in a closed space, a Sailor has lost consciousness. You should immediately enter the space to help your shipmate.
|
False
|
|
To find the storage requirements for solvents, you should refer to what document?
|
MSDS
|
|
What protective equipment should be worn when working with chlorinated cleaning solvents, organic cleaning solvents, and fluorocarbon refrigerants and solvents?
|
neoprene gloves, rubber gloves and safety splash goggles
|
|
Painting the exterior of an aircraft carrier requires about how many gallons of paint?
|
950
|
|
Paint consists of a total of how many essential ingredients?
|
four
|
|
Paint pigment provides the coloring, rust prevention, and lasting quality of paint. Pigment is made from what metals?
|
lead, zinc, or titanium
|
|
What ingredient is the most common one used to make thinners?
|
mineral spirits
|
|
What petroleum products must NEVER be used to thin paint?
|
Kerosene or diesel oil
|
|
What minimum number of coats of primer should be used on a surface cleaned to bare metal?
|
two
|
|
What is the minimum amount of drying time required between primer coats?
|
8 hours
|
|
What color paint is used to paint the underside of deck overhangs?
|
white
|
|
The deck of the machinery spaces is painted what color?
|
dark red
|
|
Feathering the paint edges of chipped or scraped areas should be done with what tool?
|
sandpaper
|
|
What tool should you use to remove deeply embedded rust?
|
a power-operated heavy-duty wire brush
|
|
You would use a rotary scaling and chipping tool on what jobs?
|
to chip a large deck area
|
|
True or False. The most important safety precaution to follow when using portable tools is to make sure they are properly grounded.
|
True
|
|
What is the first sign of galvanic corrosion on aluminum?
|
appearance of a white powdery residue
|
|
What tools should be used to chip painted aluminum surfaces?
|
hand scraper, wire brush, or sandpaper
|
|
If you have a cut on your hand, what precaution, if any, should you take when using paint remover?
|
wear gloves
|
|
How many methods does the Navy use to apply paint?
|
three
|
|
What are the two most useful brushes to use when painting?
|
flat brush and sash tool brush
|
|
What is meant by the terms laying on and laying off?
|
applying strokes first in long strokes in one direction and then crossing your first strokes
|