Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
267 Cards in this Set
- Front
- Back
- 3rd side (hint)
|
Who is the sponsor for the namp |
Chief of naval operations |
|
|
|
Who is responsible for the implementation of the namp? |
Commander, Naval Air Forces ( Comnavairfor) |
|
|
|
What word means that a procedure is mandatory? |
Shall |
|
|
|
What chapter of the Namp Comnavairforinst 4790.2(series) has Maintenance Concepts Programs, and Processes; Maintenance Unit Department; Division Organization; Manpower Management; and Aviation Officers? |
Chapter 3 |
|
|
|
How many approved classifications of classified material are there? |
3 |
|
|
|
What classification designation is applied only to material that the unauthorized disclosure of could be reasonably expected to cause damage to national security? |
Confidential |
|
|
|
What classification designation is applied only to material that the unauthorized disclosure of could be reasonably expected to cause grave damage to national security? |
Top secret |
|
|
|
What classification designation is applied only to material that the unauthorized disclosure of could be reasonably expected to cause serious damage to national security? |
Secret |
|
|
|
When must the combination of a classified storage container be changed? |
(When first placed in use) (Authorized personnel who know the combination on longer require access) (The combination is suspected of being compromised) (The container is taken out of service) |
|
|
|
The format of standard letter is found in what manual? |
Secnav M-5216.5(series) |
|
|
|
What size are the margins in the standard letter. |
1- inch at the top and bottom and on both sides of each page of a standard letter. |
|
|
|
In what manual would you find the standard subject identification code (SSIC) for a standard letter? |
Secnav M-5210.2(series) |
Secnav M-5210.2(series) |
|
|
If a letter is classified, the appropriate designation is typed in which of the following ways? |
TOP SECRET- in capital letters at the left margin two lines below the date line! |
|
|
|
What is the brief form of naval letter that is approve, disapprove, forward, or comment on the content of a letter that is transmitted through one or more addresses before it reaches its destination called? |
Endorsement |
|
|
|
What chapter of the Namp Comnavairforinst 4790.2(series) has Aircraft Controlling Custodians (ACC) and Type Wing and Carrier Air Wing ( CVW)! |
Chapter 2 |
|
|
|
What chapter of the Namp Comnavairforinst 4790.2(series) has Quality Assurance (QA)? |
Chapter 7 |
|
|
|
What appendix of the Namp Comnavairforinst 4790.2(series) had Maintenance Documentation Codes? |
Appendix E |
|
|
|
What level of maintenance is performed in centrally located for the support of operating activities within a designated geographical area, at particular base or station, or aboard aviation ships? |
Intermediate Maintenance (I-Level) |
|
|
|
What department is the largest in operating aircraft units? |
Maintenance |
|
|
|
What level of maintenance is responsible for manufacture of selected aeronautical components, liquid, and gases? |
Intermediate (I-Level) |
|
|
|
What division at an I-level maintenance command is responsible for performing micro miniature (2M) component repair? |
Avionics |
|
|
|
Internal control and distribution of the Naval Aviation Maintenance Program (NAMP) is the responsibility of what division? |
(QA) |
|
|
|
What manual governs the safeguarding, correct handling, storage, and transmission of classified material? |
Secnav M- 5510.36(series) |
|
|
|
What is the primary means that is used to identify a naval message? |
Date-time-group (DTG) |
|
|
|
Naval messages are prepared in accordance with what manual? |
Naval Telecommunications Procedures Users Manual, (NTP 3) |
|
|
|
When using the REF (Reference) set, you should use what set when there are multiple references? |
NARR (narrative) |
|
|
|
When using the REF (Reference) set, you should use what set when there are only one references? |
AMPN (amplification) |
|
|
|
When using the REF (Reference) set, you should use what set when there are only one references? |
AMPN (amplification) |
|
|
|
What instruction set forth the directives issuance system and provides for a uniform method for issuing directives by all naval activities? |
Navy Directives Issuance System, OPNAVINST 5215.17(series) |
|
|
|
How many major subject groups are in the navy standard subject identification code (SSIC) system? |
13 |
|
|
|
What standard subject identification code (SSIC) subject group is Logistics? |
4000-4999 |
|
|
|
What standard subject identification code (SSIC) subject group is Military personnel? |
1000-1999 |
|
|
|
What standard subject identification code (SSIC) subject group is Information Technology and Communications? |
2000-2999 |
|
|
|
What standard subject identification code (SSIC) subject group is Operation and Readiness? |
3000-3999 |
|
|
|
What standard subject identification code (SSIC) subject group is Medicine and Dentistry? |
6000-6999 |
|
|
|
What standard subject identification code (SSIC) subject group is Financial Management? |
7000-7999 |
|
|
|
What standard subject identification code (SSIC) subject group is General Administration and Management? |
5000-5999 |
|
|
|
What standard subject identification code (SSIC) subject group is Financial Management? |
7000-7999 |
|
|
|
What standard subject identification code (SSIC) subject group is Ordnance Material? |
8000-8999 |
|
|
|
What standard subject identification code (SSIC) subject group is Ships Design and Material? |
10000-10999 |
|
|
|
What standard subject identification code (SSIC) subject group is General Administration and Management? |
5000-5999 |
|
|
|
What standard subject identification code (SSIC) subject group is Medicine and Dentistry? |
6000-6999 |
|
|
|
What standard subject identification code (SSIC) subject group is Financial Management? |
7000-7999 |
|
|
|
What standard subject identification code (SSIC) subject group is Ordnance Material? |
8000-8999 |
|
|
|
What standard subject identification code (SSIC) subject group is Ships Design and Material? |
10000-10999 |
|
|
|
What standard subject identification code (SSIC) subject group is Civilian Personnel? |
12000-12999 |
|
|
|
What standard subject identification code (SSIC) subject group is Medicine and Dentistry? |
6000-6999 |
|
|
|
What standard subject identification code (SSIC) subject group is Financial Management? |
7000-7999 |
|
|
|
What standard subject identification code (SSIC) subject group is Ordnance Material? |
8000-8999 |
|
|
|
What standard subject identification code (SSIC) subject group is Ships Design and Material? |
10000-10999 |
|
|
|
What standard subject identification code (SSIC) subject group is Civilian Personnel? |
12000-12999 |
|
|
|
What standard subject identification code (SSIC) subject group is Aeronautical and Astronautical Material? |
13000-13999 |
|
|
|
Support Equipment (SE) operator licenses are valid for type equipment and aircraft for how long? |
3 years |
|
|
|
Who is overall in charge of maintenance administration? |
AMO |
|
|
|
What type of publication provides the basis for planning, scheduling, and actual performance of scheduled maintenance requirements? |
Planned Maintenance System (PMS) Publications |
|
|
|
What program is the only automated system authorized for use in managing CTPL technical data? |
Enhanced Library Management System (ELMS) |
|
|
|
Run Library Audit function "Query Checked Out" TMs |
Weekly |
|
|
|
Run Library Audit function "Query Checked Out" TMs |
Weekly |
|
|
|
Verification of Requisition Log Run Pena publication Audit |
Monthly |
|
|
|
Run Locator List for each Work Center |
Quarterly |
|
|
|
Make copy of CTPL ADRL report for transaction file? |
Annually |
|
|
|
Maintain a current copy of the complete listing? |
Anytime |
|
|
|
The ELMS main menu is sub- divided into how make parts |
Four |
|
|
|
TMs are updated through the issuance of what? |
RACs/IRAC, formal changes, revisions, pick-up revisions or NAVAIR TM notices |
|
|
|
What type of publication provides the basis for planning, scheduling, and actual performance of scheduled maintenance requirements? |
Planned Maintenance System (PMS) Publications |
|
|
|
What command is responsible for defining and enforcing all policies relative to the creation storage, and distribution of digital technical data? |
Natec |
|
|
|
In a conventional numbering system part l, the number 01 designates what type of manual? |
Airframes |
|
|
|
In a conventional numbering system part l, the number 01 designates what type of manual? |
Airframes |
|
|
|
In a conventional numbering system part l, the number 01 designates what type of manual? |
Airframes |
|
|
|
In a conventional numbering system part l, the number 02 designates what type of manual? |
Power plants |
|
|
|
What publication contains the policies and procedures that govern the TD system? |
Navair 00-25-300 |
|
|
|
How long are the annotated Weekly IRAC and Technical Manual Trackers Summary messages required to be kept for? |
6 months |
|
|
|
What percent of publications held in the DTPL are to be page Checked during quarterly audit? |
25 |
|
|
|
NAVAIRSYSCOM issues scheduled maintenance requirements by publishing PMS publications for every model of? |
Navy and Marine Corps aircraft |
|
|
|
Monthly Flight Summary |
CNAF 4790/21A |
|
|
|
ETR report must be submitted not later than________hours of the first working day following the date the action occurred. |
2400 |
|
|
|
Category 1 strike X-rays for lost (not recovered) or destroyed aircraft must be submitted as of _______ on the day of occurrence? |
2400 |
|
|
|
Quarterly Hours in Life will be submitted via the AIRRS WEB site by the ___ working day of the month following the months of DEC, MAR, JUN, SEP |
5th |
|
|
|
Quarterly Hours in Life must be submitted via the DECKPLATE-AIRRS Web site by the fifth working day of what months? |
Jan, Apr, Jul, Oct |
|
|
|
An operating procedure, practice etc, which, if not correctly followed, could result in personal injury or loss of life |
Warning |
|
|
|
An operating procedure, practice etc, which, if not correctly followed, could result in personal injury or loss of life |
Warning |
|
|
|
An operating procedure, practice, etc., which if not correctly followed, could result in damage to or destruction of equipment. |
Caution |
|
|
|
An operating procedure or condition that must be emphasized. |
Note |
|
|
|
What has a bearing on performance, stability, and control of the aircraft? |
Gross Weight and Center of Gravity (CG) |
|
|
|
What Two types of load adjusters are there |
(2) slide- rule type & circular type |
|
|
|
Basic Weight and Balance Record |
Forms 365-3 / Chart C |
|
|
|
Basic Weight Check List Record |
Form 365-1 / Chart A |
|
|
|
Weight and Balance Personnel Record |
DD From 365 |
|
|
|
AVERAGE WEIGHT- The summation of the individual weight divided by the number or the individual weight? |
First weight +Second weight +Third / 3=Average weight |
|
|
|
Has overall responsibility for managing and implementing the Navair technical directives (TDs) system |
AIR-6.0 |
|
|
|
Has cognizance over, and overall responsibility for, the technical content of NAVAIR TDs. |
AIR-4.0 |
|
|
|
Must provide concurrence with all Grounding or Flight Restriction Bulletins prior to their release to the fleet. |
AIR-4.0 |
|
|
|
Has cognizance over, and overall responsibility for, all flight clearance/airworthiness policy and requirements. If appropriate make recommendations to any applicable FMS customers. |
AIR-4.0P |
|
|
|
Has approval authority for all flight clearance requests. |
AIR-4.0P |
|
|
|
Provides on-line configuration status accounting for Naval aircraft, engines, support equipment, maintenance trainer, and serial number weapon system components |
DECKPLATE-Technical Directive Reporting System (TDRS) |
|
|
|
What gathers TD application and compliance data on individual equipment items and provides that data in the form of tailored automated reports, to operating and management activities? |
TDRS |
|
|
|
________and responses to TPDRs, will not be used to make pen and ink changes to any Navair technical publication |
RACs |
|
|
|
Therefore, it is mandatory that the_________maintain an effective, update method to ensure that technical manual (TMs) keep pace with hardware configuration. |
Naval Air Systems Command (NASC) |
|
|
|
TMs are updated through the issuance of |
RACs/IRACs, Formal Changes, Revisions, Pick-up Revisions, or Navair TM Notices |
|
|
|
For revisions and changes to (NATOPS) program publications, refer to. |
OPNAVINST 3710.7 |
|
|
|
All outstanding TM RACs should be against the latest |
Formal change or revision to an manual |
|
|
|
________provides urgent TM change data. |
Technical Manual Rapid Action Change (RACs) |
|
|
|
As the electronic age of TMs progresses formal changes will be discontinued in favor of |
Revision and IRACs |
|
|
|
_______-is issued by Naval activities or Contract Administrative Office (CAO) as a Naval Message (Type A) or as a formal Naval letter with replacement page enclosures issued as a PDF file (Type B) |
IRACs |
|
|
|
_______-is issued by Naval activities or CAOs as complete formal change to TM (including all associated format matter). |
RACs |
|
|
|
________- supports the sustainment of Interactive Electronc Teahnical Manual (IETM) and accomplish the purpose and functions of IRACs in a digital format. |
Electronic Rapid Action Changes (ERACs) |
|
|
|
________- shall be used to disseminate urgent TM change information when funding, contractual and programmatic conditions make their use practical. |
RACs |
|
|
|
________- may be used when funding, contractual and programmatic circumstances make the use of a RAC impractical. |
IRAC |
|
|
|
All outstanding X-RAY corrections and other X-RAY transactions occurring between 0001and 2400 on a given day must be reported no later than______ the next day. |
1600 |
|
|
|
Action Code ____ will be used to report aircraft locations Change when embarking or debarking associated with extend deployment of 30 days or more |
L |
|
|
|
As fast as possible with an objective of less than 10 minutes. |
Flash (Z) |
|
|
|
(Speed of service (SOS) objectives for messages delivered via AUTODIN in 30 minutes) As fast as possible with an objective of less than 10 minutes. |
Flash (Z) |
|
|
|
Speed of service (SOS) objectives for messages delivered via AUTODIN in 30 minutes |
IMMEDIATE (O) |
|
|
|
Speed of service (SOS) objectives for messages delivered via AUTODIN in (3 hours ) |
PRIORITY |
|
|
|
Speed of service (SOS) objectives for messages delivered via AUTODIN in (3 hours ) |
PRIORITY (P) |
|
|
|
Speed of service (SOS) objectives for messages delivered via AUTODIN in (6 hours) |
ROUTINE (R) |
|
|
|
The highest precedence normally assigned to an administrative message is________ |
PRIORITY |
|
|
|
The highest precedence normally assigned to an administrative message is________ |
PRIORITY |
|
|
|
Messages reporting death or serious illness which shall be assigned |
(IMMEDIATE) precedence |
|
|
|
All administrative messages shall use the operating signal (OPSIG)________ after the date time group! |
"ZYB" |
|
|
|
_________ is the USMTF used for most narrative messages. The only exceptions are narrative messages for which a publication, institution, or other directive specifies a different format. |
GENADMIN |
|
|
|
_________ is the USMTF used for most narrative messages. The only exceptions are narrative messages for which a publication, institution, or other directive specifies a different format. |
GENADMIN |
|
|
|
_________ provides the rules and general instructions for the preparation of GENADMIN messages? |
Annex A |
|
|
|
_________ is the USMTF used for most narrative messages. The only exceptions are narrative messages for which a publication, institution, or other directive specifies a different format. |
GENADMIN |
|
|
|
_________ provides the rules and general instructions for the preparation of GENADMIN messages? |
Annex A |
|
|
|
______ Provides users with a GENADMIN drafting template |
MTF Editor |
|
|
|
________ messages is one that uses defined data fields that are both readable and machine processable? |
Pro forma |
|
|
|
________ messages are identified in various publications and directives which establish pro forma message requirements? |
Pro forma |
|
|
|
There are four types of classified and unclassified narrative messages: |
Singe address, multiple address, book and general message |
|
|
|
________ a message that is destined for two or more addresses, but is of such a nature the drafter determines that no addressee needs nor should be informed of the other addressees ( commercial contract bid). |
Book |
|
|
|
_______A GENADMIN- formatted message designed to meet recurring requirements to disseminate information to a wide, predetermined, standard distribution. |
General message |
|
|
|
Message precedence is used to indicate the relative order of processing and delivery to the recipient. Four precedence categories. |
Routine (R), Priority (P), Immediate (O), Flash (Z) |
|
|
|
Sailor of the year grading sheet |
OPNAV 1650/17 |
|
|
|
________is any condition with the potential to negatively impact mission accomplishment or cause injury, death, or property damage? |
IDENTIFY THE HAZARDS (STEP 1) |
|
|
|
__________ for each hazard identified, determine the associated degree of risk on terms of probability and severity? |
Assess the Hazard ( Step 2) |
|
|
|
There are three basic actions which ultimately lead to making informed risk decisions: identifying control options; determining the effect of these controls on hazard or risk; and ultimately deciding how to proceed. |
Make Risk Decisions (Step 3) |
|
|
|
Once the risk control decisions are made, the next step is implementation. |
Implement Control (Step 4) |
|
|
|
Supervise and review involves determining the effectiveness of risk control throughout the mission or task. |
Supervise (Step 5) |
|
|
|
________ is the only approved means to number, segregate, symbolize and file Department records? |
Standard Subject Identification Codes (SSIC) |
|
|
|
The command security manager may be assigned full-time, part-time or as a collateral duty and must be an? |
Officer or civilian employee, GS-11 or above |
|
|
|
Request for Top Secret original classification authority shall be submitted, in writing, to the Secretary of Navy via? |
CNO (N09N) |
|
|
|
Request for Top Secret original classification authority shall be submitted, in writing, to the Secretary of Navy via? |
CNO (N09N) |
|
|
|
Request for Secret or Confidential original classification authority shall be submitted, in writing, directly to the? |
CNO (N09N) |
|
|
|
Fraternization instruction and article? |
OPNAVINST 5370.2C / Article 1165 |
|
|
|
What is the code for an operation type of personnel assignment? |
A |
|
|
|
Meter block is mandatory when Assy Cd for on-equipment work is_______and maintenance level is 1 |
G,H,S |
|
|
|
Documented in-process inspections are indicated with a? |
Y |
|
|
|
________ shall administer the DON Correspondence Management Program and proposed changes to manual with the Chief of Naval Operations (CNO) and the Commandant of Marine Corps (CMC) |
The Secretary of the Navy (SECNAV) |
|
|
|
__________ shall establish a correspondence management program based on the requirements and guidance of SECNAV M-5216.5. |
Commanding Officers and Heads of Activities |
|
|
|
Consolidated Performance Mertrics Report |
Maint-1 Report |
|
|
|
Aircraft Readiness Degradation and Utilization Summary Report |
Maint-2 Report |
|
|
|
Subsystem Capability Impact Reporting by WUC/UNS Report |
Maint-3 Report |
|
|
|
Subsystem Capability Impact Reporting by WUC/UNS Report |
Maint-3 Report |
|
|
|
Detailed Mission and Maintenance Data by Aircraft Serial Number Report |
Maint-4 Report |
|
|
|
Maintenance Man-Hours Report |
Maint-5 Report |
|
|
|
Maintenance Man-Hours Report |
Maint-5 Report |
|
|
|
Detailed Data Extract Report |
Maint-6 Report |
|
|
|
_________Shows, by Aircraft BUNO, the total number of discrepancy hours limiting the equipment from performing its mission or function during the reporting period? |
Maint-2 Report |
|
|
|
___________displays SCIR hours by Mission category and AWM hours by reason Codes, summarized for a given EOC code and associated WUC during a reporting period? |
Maint-3 |
|
|
|
_________ provides aviation supervisory personnel with a single source of information from which organizational/equipment capabilities and resource expenditures can be measured. |
Maint-1 Report |
|
|
|
__________shows Mission capability and Maintenance Data for each MAF/WO submitted for a given EOC code and associated WUC by Aircraft BUNO within Assy Cd and ORG code? |
Maint-4 Report |
|
|
|
_______provides data on DMMH/FLTHR for aircraft assigned to a unit during the selected reporting period? |
Maint-5 Report |
|
|
|
________provides key detailed data from MAFs/WOs completed by a unit during the selected reporting period? |
Maint-6 Report |
|
|
|
________ cannot be backfitted during a contingency situation. |
Inspection / TD WOs |
|
|
|
Index letters _______shall be assigned to block 79 in alphabetical order. For failed parts |
H-Z |
|
|
|
______ in block 79 indicates the first failed part record. |
H |
|
|
|
______ indicates the last and 19th failed parts record against the maintenance action |
Z |
|
|
|
The purpose of block______ is to flag engineering data items only, not supply usage data. |
79 |
|
|
|
NAVAIR 17-1-125 |
Preservation |
|
|
|
NAVAIR 17-1-114.1 |
NDI OR LOAD TESTING |
|
|
|
What problem severity is classified as total, controlled shutdown of the entire NALCOMIS system, where return to normal operations is expected to take longer than 6 hours? |
High |
|
|
|
What problem severity is classified as failure of one user- oriented peripheral hardware device? |
Low |
|
|
|
Total, uncontrolled failure of the entire NALCOMIS system. Return to normal operations is expected to take longer than 6 hours. |
Critical |
|
|
|
Controlled shutdown of the entire NALCOMIS system for less than 6 hours, or failure of a major component of the System (tape drive, communications line, main printer, etc.) |
Medium |
|
|
|
In what's section of SE Custody and Maintenance History Record are technical directives (TDs) logged? |
Section 4 |
|
|
|
What's section of SE Custody and Maintenance History Record is used to Record rework? |
Section II |
|
|
|
What section of SE Custody and Maintenance History Record is used to Record Transfer |
Section I |
|
|
|
What section of SE Custody and Maintenance History Record is used to Record Preservation/De-Preservation? |
Section III |
|
|
|
What section of SE Custody and Maintenance History Record is used to Record Periodic Maintenance? |
Section V (5) |
|
|
|
What section of SE Custody and Maintenance History Record is used to Record Periodic Maintenance? |
Section V (5) |
|
|
|
What section of SE Custody and Maintenance History Record is used to Record Miscellaneous History? |
Section VI (6) |
|
|
|
A list of effective TDs, applicable to a specific BUNO/SERNO but not incorporated. |
List02 |
|
|
|
A list of effective TDs, applicable to a specific BUNO/SERNO but not incorporated. |
List02 |
|
|
|
These list only pertain to AFBs and AFCs, and are maintained in the aircraft logbook in place of CNAF/24A. |
List02 |
|
|
|
This summary report lists BUNO, TDs, and incorporation status. This report also allows the type Wing to easily monitor configuration of assigned aircraft and is distributed quarterly to the type Wing. |
List03 |
|
|
|
A list of effective TDs applicable to a specific BUNO/SERNO and report as incorporated. And also pertain to AFBs and AFCs and are maintained in the aircraft logbook/ in place of CNAF/24A |
List04 |
|
|
|
Provides a list of incorporated/ not incorporated TDs for specific aircraft, by bureau number, or specific engines by serial number. This is same as a combine List02 and list04 |
List06 |
|
|
|
Who is responsible for designated, in writing via the MMP, a collateral duty TD Program coordinator (TDPC) |
MMCO |
|
|
|
Who is responsible for reconciling all TDs in an awaiting parts/kits status weekly? |
TD Program coordinator (TDPC) |
|
|
|
This file is maintained by the COMNAVAIRSYSCOM (AIR-6.8.5) to reduce active file volume and operating cost. |
List04H |
|
|
|
Parachute Record |
OPNAV 4790/101 |
|
|
|
Parachute Record |
OPNAV 4790/101 |
|
|
|
Seat Survival Kit Record |
(OPNAV 4790/137) |
|
|
|
Aircrew Systems Record |
(OPNAV 4790/138) |
|
|
|
Aircrew Personal Equipment Record |
OPNAV 4790/159 |
|
|
|
Who is the key to an effective MDS? |
Work center supervisor |
|
|
|
Who at the O-level and I-level activity will monitor, control, and administer MDS within the activity? |
System Administrator/ Analyst (SA/A) |
|
|
|
What part of the Maintenance Data System (MDS) involves the most complex and the widest range of data? |
Maintenance Data Report (MDR) |
|
|
|
_________is a data warehouse and reporting system that is incrementally replacing NALDA system |
DECKPLATE |
|
|
|
What DECKPLATE Report displays a Maintenance Level 1 summarization of maintenance actions associated with a WUC, which required repair to be done on a aircraft? |
DP-0012 |
|
|
|
What DECKPLATE Report displays the Maintenance Level 1 man-hours by WUC, then by ORG code form the JCN? |
DP-0011 |
|
|
|
What DECKPLATE Report gives a snapshot by Action Org and HOF NIIN of all IMA ATs? |
DP-0023 |
|
|
|
What DECKPLATE Report provides Summary data about the HOF NIIN? |
DP-0027 |
|
|
|
What DECKPLATE Report provides number of flights, Flight hours, number of ship flights, ship flight hours, and the TMR codes and associated TMR flight hours by date, owner ORG code, TEC, and BUNO for the time frame of interest? |
DP-0041 |
|
|
|
What Report combines data from a combination of NALCOMIS/DECKPLATE Report to highlight specific problem areas where overall maintenance management can be improved? |
Monthly Maintenance Summary (3m) |
|
|
|
These manuals cover the minimum daily inspections requirements, as well as servicing, special inspections and if applicable, conditional inspections. |
Daily, Special, Preservation, Conditional, and Aircraft Service Period Adjustment (ASPA) Manuals |
|
|
|
What Naval Aeronautics Publications Cross-Reference Publication is the airborne weapons stores publication index? |
Navair 01-700 |
|
|
|
________is the primary index for requisitioning Navy publication, forms, and other digital documents hosted by Naval Supply System Command in Mechanicsbrug, PA. NAVSUP P2003 is available on the NAVSUP website. |
NAVSUP PUB 2003 |
|
|
|
Power Plant Bulletin (PPB) |
01 |
|
|
|
Power Plant Change (PPC) |
02 |
|
|
|
Commodity Sotfware Change (CSC) |
40 |
|
|
|
Commodity Sotfware Bulletin (CSB) |
41 |
|
|
|
Commodity Sotfware Bulletin (CSB) |
41 |
|
|
|
Airframe Change (AFC) |
50 |
|
|
|
Commodity Sotfware Bulletin (CSB) |
41 |
|
|
|
Airframe Change (AFC) |
50 |
|
|
|
Avionic Change (AVC) |
54 |
|
|
|
Commodity Sotfware Bulletin (CSB) |
41 |
|
|
|
Airframe Change (AFC) |
50 |
|
|
|
Avionic Change (AVC) |
54 |
|
|
|
Avionic Bulletin (AVB) |
55 |
|
|
|
Airframe Bulletin (AFB) |
74 |
|
|
|
What TD priority is assigned to document configuration changes that have been incorporated in all affected equipment by the change designer/originator before the TD is issued? |
Record purpose |
|
|
|
What TD priority is assigned when unsafe conditions exist that, if uncorrected, could result in fatal or serious injury to personal, or extensive damage to or destruction of valuable property, and when such conditions embody risks which are calculated to be unacceptable? |
Immediate |
|
|
|
What TD Priority is assigned when factors of combat necessity, potential hazardous conditions that could result in personal injury or damage to valuable property, or unacceptable reductions in operational readiness exist, and such conditions, if uncorrected, would compromise safety or embody risks which are calculated to be acceptable within defined time/performance limits. |
Urgent Action |
|
|
|
What TD priority is assigned whenever the urgency of the situation does not warrant assignment of immediate or Urgent categories and the assignment of Record Purpose would be inappropriate. |
Routine Action |
|
|
|
Urgency sometimes requires change incorporation be initiated without delay, following configuration control board (CCB) approval |
Interim Change |
|
|
|
What is the primary COMNAVAIRSYSOM document for implementing a configuration change. |
Formal change |
|
|
|
Record Purpose maximum completion time is? |
18 months or less |
|
|
|
Record Purpose maximum completion time is? |
18 months or less |
|
|
|
Immediate changes have a maximum competition time of? |
2 years |
|
|
|
Urgent changes completion time is? |
3 years |
|
|
|
Urgent changes completion time is? |
3 years |
|
|
|
Routine changes maximum completion time is? |
8 years |
|
|
|
Transfer of an installed engine/propulsion |
11-60 |
|
|
|
Transfer of an installed engine/propulsion |
11-60 |
|
|
|
Receipt of an installed engine/propulsion system |
11-61 |
|
|
|
Transfer of an installed engine/propulsion |
11-60 |
|
|
|
Receipt of an installed engine/propulsion system |
11-61 |
|
|
|
EOQ Report |
11-90 |
|
|
|
Suicide Prevention Program |
Opnav 1720.4A |
|
|
|
Category 1 strike damage code |
Damage or loss |
|
|
|
Category 1 strike damage code |
Damage or loss |
|
|
|
Category 2 strike damage code |
Depreciation |
|
|
|
Category 1 strike damage code |
Damage or loss |
|
|
|
Category 2 strike damage code |
Depreciation |
|
|
|
Category 3 strike damage code |
Administrative |
|
|
|
Category 1 strike damage code |
Damage or loss |
|
|
|
Category 2 strike damage code |
Depreciation |
|
|
|
Category 3 strike damage code |
Administrative |
|
|
|
Category 4 strike damage code |
Complete service life |
|
|
|
Category 5 strike damage code |
Repairable damage |
|
|
|
X-ray data element description Block A |
BUNO |
|
|
|
X-ray data elements description Block B |
Puc |
|
|
|
X-ray data element description Block C |
Date of Action |
|
|
|
X-ray data element description Block D |
Action code |
|
|
|
X-ray data element description Block E |
Status code |
|
|
|
X-ray data element description Block F |
Model Designation |
|
|
|
X-ray data element description Block F |
Model Designation |
|
|
|
X-ray data element description Block G |
Period Number |
|
|
|
X-ray data element description Block F |
Model Designation |
|
|
|
X-ray data element description Block G |
Period Number |
|
|
|
X-ray data element description Block H |
PED/FID |
|
|
|
X-ray data element description Block J |
Strike/Damage code |
|
|
|
X-ray data element description Block J |
Strike/Damage code |
|
|
|
X-ray data element description Block K |
Acceptance Date |
|
|
|
X-ray data element description Block L |
ASPA |
|
