Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
18 Cards in this Set
- Front
- Back
|
AIRCRAFT WHEELS ARE MADE FROM WHAT TWO MATERIALS?
|
ALUMINUM OR MAGNESIUM ALLOY.
|
|
|
WHAT ARE TWO GENERAL TYPES OF WHEELS USED ON NAVAL AIRCRAFT?
|
DIVIDED AND DEMOUNTABLE FLANGE.
|
|
|
ON A DEMOUNTABLE FLANGE WHEEL, WHAT HOLDS THE FLANGE IN PLACE?
|
A LOCKRING.
|
|
|
WHAT IS THE BASIC UNIT ON AN AIRCRAFT WHEEL ASSEMBLY?
|
THE WHEEL CASTING.
|
|
|
ALL MAIN LANDING GEAR WHEEL BRAKING COMPONENTS ARE ATTACHED TO THE WHEEL CASTING, WHAT DO THESE COMPONENTS CONSIST OF?
|
BRAKE DRUM OR BRAKE DRIVE KEYS.
|
|
|
WHAT ARE TWO MAJOR CAUSES OF AIRCRAFT WHEEL FAILURES?
|
CORROSION AND LOSS OF BEARING LUBRICATION.
|
|
|
WHAT SOLVENT SHOULD BE USED TO CLEAN BEARINGS,BEARING CUPS,WHEEL BORES,AND GREASE RETAINERS?
|
P-D 680, TYPE II.
|
|
|
BEFORE INSTALLING FELT GREASE RETAINERS, WHAT SHOULD YOU SOAK THEM IN?
|
VV-L-800 OIL.
|
|
|
DURING WHEEL INSTALLATION, HOW FAR DO YOU BACK OFF THE AXLE NUT WHEN THE WHEEL NO LONGER SPINS FREELY?
|
ONE CASTELLATION (ONE-SIXTH) TURN.
|
|
|
WHERE CAN YOU FIND THE PROCEDURES FOR A/C WHEEL INSTALLATION?
|
APPLICATION MIM.
|
|
|
WHAT ACTIVITY DETERMINES WHEEL OVERHAUL REQUIREMENTS?
|
INTERMEDIATE MAINTENANCE ACTIVITY (IMA).
|
|
|
TO WHAT MANUAL SHOULD YOU REFER TO FIND INFORMATION ON CLEANING A/C WHEELS?
|
NA 04-10-1.
|
|
|
A FUSE PLUG CAN BE KEPT IN SERVICE IF THE EUTETIC CORE MATERIAL DOES NOT EXTEND WHAT MAXIMUM DISTANCE ABOVE THE SURFACE OF THE HEX NUT?
|
ONE-SIXTEENTH (1/16) INCH.
|
|
|
WHAT GREASE SHOULD YOU USE TO REPACK THE WHEEL BEARINGS?
|
MIL-G-81322 GREASE.
|
|
|
WHAT IS THE RECOMMENDED METHOD FOR REPACKING THE BEARINGS?
|
PRESSURE METHOD.
|
|
|
GOUCES, NICKS , AND POCKMARKS ON THE OUTSIDE ENDS OF BEARING HUBS ARE CONSIDERED SIGNIFICANT IF THEY EXCEED WHAT DEPTH?
|
0.020 INCH.
|
|
|
WHAT PART OF THE TIRE GIVES IT TENSIL STRENGTH,RESISTANCE TO INTERNAL PRESSURE, AND THE ABILITY TO MAINTAIN ITS SHAPE?
|
THE CORD BODY.
|
|
|
WHAT IS THE MOST COMMON TREAD PATTERN DESIGN USED ON NAVAL A/C TIRES?
|
RIBBED PATTERN.
|
