Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
8 Cards in this Set
- Front
- Back
Pushback / Start
|
1. Confirm FLT deck door - locked
2. Window closed 3. Select "Engine" on EICAS 4. Set STAB TRIM 5. Set transponder D-W-E-T-T |
|
Cleared to Start
|
1. Packs - OFF (duct press 30 PSI)
2. Move start selector - GND 3. Verify Oil PSI increase 4. Verify EGT increases and stays w/in limits |
|
After Start
|
1. Packs - Auto
2. Isolation switches - OFF (ON for single taxi) 3. CDUs - (PF, T/O Ref) ( PM, Legs Page) 4. Verify V speeds - Set 5. Clear "Right" P-I-C-S |
|
Taxi Flow
|
1. Clearance to taxi
2. Set Flaps 3. FLT controls - check 4. Select 'Engine' on EICAS 5. Verify Inst & Displays |
|
Before T/O
(2 min prior) |
1. Notify cabin to be seated
2. Check oil temp 3. Review EICAS, note messages 4. Packs - as req'd 5. Verfify Flaps 6. (PF) Verify - LNAV armed as req'd 7. (PF) Verify - MCP heading & alt |
|
T/O
|
1. Verbally confirm r/w
2. Final Clear? 3. Select WX or TERR 4. Transponder TA/RA 5. Note FOB & Start time |
|
After Landing
|
1. Flaps - Up
2. Verfiy Speed Brake - Down 3. APU - as needed 4. Wing Anti-ice - OFF 5. Engine Anti-ice - as req'd 6. F/D - OFF 7. A/T Arm - OFF 8. Autobrakes - OFF 9. Wx & TERR - OFF 10. Group A/S bugs @ 80K 11. Stab - 4 units 12. Transponder - STBY |
|
Shutdown
|
1. Engine Anti-ice switches - OFF
2. Wing Anti-ice switched - OFF 3. Isolation valves - OPEN 4. Packs - As req'd 5. Transponder - 2000 & STBY 6. Display IRU error |