• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/83

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

83 Cards in this Set

  • Front
  • Back

Over due inspections

Back (Definition)

Over due inspection recommendations

Back (Definition)

Plate lining

Back (Definition)

Owner/user

Post weld heat treatment PWHT

Pressure boundary

Pressure test

Pressure vessel

Pressure vessel engineer

Procedures

Quality assurance

Quality control

Repair

Repair organization

Required thickness

Rerating

Risk-based inspection

Scanning nondestructive examination

Same or similar service

Strip lining

Temper embrittlement

Temporary repairs

Testing

Tightness test

Transition temperature

ASME code

ASME Boiler and pressure vessel code including its addenda and code cases

CML

Condition monitoring location

CDW

Controlled deposition welding

CUI

Condition under insulation

E&P

Exploration and production

ET

Eddy current examination

FFS

Fitness for service

GMAW

Gas metal arc welding

GTAW

Gas tungsten arc welding

IOW


Integrity operating window

MAT

Minimum allowable temperature

MAWP

Maximum allowable working pressure

MDMT

Minimum design metal temperature

MOC

Management of change

MT

Magnetic particle examination

NDE

Nondestructive examination

PMI

Positive material identification

PT

Liquid penetrant examination

PWHT

Postweld heat treatment

QA

Quality assurance

QC

Quality control

RBI

Risk based inspection

RT

Radiographic examination

SMAW

Shielded metal arc welding

UT

Ultrasonic examination

WPS

Welding procedure specification

An owner/user of pressure vessels shall exercise control of the vessel and

The owner/user inspection organization shall also control

An owner/user organization is responsible for

These system and procedures will be contained and maintained in a quality assurance (QA) inspection/repair management system and shall include at least the following

Management shall have an appropriate requirement and work process to insure

management OF CHANGE (MOC) The owner/user is responsible for implementing and executing an effective

An effective MOC review process is vital to

When pressure equipment integrity may be affected the MOC process shall include

Changes to the hardware and the process shall be included in the MOC

Integrity operating windows (IOW) the owner/user should implement and maintain an effective

IOWs are implemented to avoid

Future inspection plans and intervals have historically

Without an effective IOW and process control program there often is no

Deviations from and changes of trends within established IOW limits should be brought to the attention of

IOWs should be established for process parameters (both physical and chemical) that could impact

Examples of the process include

Particular attention to monitoring IOWs should also be provided during

Engineer The pressure vessel engineer is responsible to the owner/user for activities involving

Repair Organization. All repairs and alterations shall be performed by a qualified

The repair organization is responsible to the

Inspector. The inspector is responsible to the owner/user to

The inspector shall be directly involved in the inspection activities especially

However all NDE results shall be evaluated and accepted by the

Inspectors shall be certified in accordance with

Examiners. The examiner shall perform the NDE in accordance

The examiner does not need API 510 inspector certification and does not need to be

The examiner does need to be trained and competent in the NDE procedures being used and

Examples of certification that may be required include

Inspectors conducting their own examinations with NDE techniques shall also

The examiners employer shall maintain

These records shall be available to the inspector who is responsible to the owner/user to determine that all

Other Personnel. Operating, maintaining, engineering (process and mechanical) , or other personnel who have special knowledge or expertise related to particular pressure vessels shall be responsible for