Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
396 Cards in this Set
- Front
- Back
What is used to calculate the actual distance a prop moves?
|
Geometric Pitch and Effective Pitch
|
|
What is the most common type of failure in a continuous loop fire detection system?
|
kinks and/or dents
|
|
The starter turns what part of an aircraft engine?
|
Compressor
|
|
What is the first step when removing an ignitor plug from an APU?
|
Disconnect the ignitor lead from the ignitor plug
|
|
How long do you let a fuel cell sit when checking for leaks?
|
30 mins
|
|
What does a finishing symbol on a part mean on a diagram?
|
Finish marks are used to indicate the surface that must be machine finished
|
|
What is the usable range of a torque wrench?
|
20-100% The working range should not be within the lower 20% of the capacity of the torque wrench
|
|
What unit of measurement is used to measure vibrations in aircraft?
|
The Coast Guard uses velocity, measured in inches per second (IPS) to measure vibration
|
|
Define aircraft rigging
|
Positioning the flight control system in neutral and temporarily locking it there with rig pins and shims adjusting surface travel, system cable tension, linkages, and adjustable stops to specifications
|
|
How do you correct lateral imbalance during track and balance?
|
PCR's or balance weights
|
|
What is the AEL MKIII fuel tester used for?
|
AEL MKIII is a portable field unit used to determine solid contamination in aircraft fuels
|
|
What is the limit of sediment allowed with the AEL MKIII fuel test kit?
|
The particulate contamination level for fuel being dispensed to aircraft is 1.0 mg/liter
|
|
What is the chart used for on the AEL MKIII fuel test kit?
|
A calibration chart is provided to convert the meter readings to contamination level in mg/liter
|
|
Why are there multiple filters with the AEL MKIII fuel test kit?
|
The use of two filters eliminates errors due to variations in color of different fuels
|
|
What type of bulb is used with the AEL MKIII fuel test kit?
|
Ultraviolet light
|
|
What is the AEL MK I fuel test kit used for?
|
Water contamination
|
|
What is the limit of water allowed with the AEL MK I fuel test kit?
|
The limit of water contamination in turbine fuels is 5 ppm
|
|
How is water measured when using the AEL MK I fuel test kit?
|
PPM (parts per million)
|
|
What are the different types of fuel contaminates?
|
Particulates, water, microbes, and surfactants
|
|
At what PSI are fuel filters changed?
|
The pressure differential across the elements at rated flow exceeds 15 psi on the aircraft servicing unit and 20 psi on all other vessels
|
|
How do you correct a vertical imbalance on a track and balance?
|
PCR
|
|
When you blend turbine blade damage, in which direction do you blend it?
|
Blend at right angles to the width of the turbine blade
|
|
How much kinetic energy of the exhaust gases does the turbine transfer to mechanical energy?
|
60 - 80% of the total pressure energy from the exhaust gases
|
|
What is determined when measuring the exposed metal on the oleo strut piston?
|
Amount of air
|
|
Types of aircraft skin damage are classified as highly critical, non-critical, and ?
|
Semi-critical
|
|
What does air cause in a hydraulic system?
|
High fluid temperatures, cavitation which can lead to slow erratic movement and damage to mechanical components
|
|
How often do you fill the cart when flushing a hydraulic system?
|
Replenish the reservoir using approved fluid dispensing equipment before the fluid level reaches the half-full point
|
|
How many times do you flush a hydraulic system?
|
Three times the system capacity
|
|
What is the most common contaminate found in hydraulic systems?
|
Solid matter (particulate contamination)
|
|
What are the types of contaminates found in hydraulic systems?
|
Organic, metallic solids, non-metallic (inorganic) solids, foreign fluids, air and water
|
|
Where do you take a hydraulic fluid sample?
|
High flow area
|
|
Different ways to purge a fuel cell?
|
Air exhaust, Air blow, oil dilution, JP8/5 rinse
|
|
What is used to purge a fuel cell?
|
Blown air, Mil-PRF-6081 grade 1010 oil, JP8/5
|
|
What type of corrosion will graphite cause of engine parts?
|
Galvanic corrosion
|
|
What chemical is used to clean control cables?
|
PD-680
|
|
What do you place a bladder fuel cell on when you remove it from packaging?
|
Wax paper
|
|
What types of fuel cells are used on Coast Guard aircraft?
|
Bladder, integral, external
|
|
What are the different methods of checking for leaks on fuel cells?
|
Powder, torn paper, air purge, dye
|
|
What is the preferred method of checking for leaks on fuel cells?
|
Powder and torn paper
|
|
How long do you let a fuel cell sit when checking for leaks after wiping suspect area?
|
6 min.
|
|
What manual is used to determine rivet size and criteria?
|
TO 1-1A-8, Structural Hardware Manual
|
|
What is not an indication of a failed rivet?
|
Signs of rivet failure include tipped head and looseness, and sometimes chipped or cracked paint
|
|
What manual is used for types of hardware?
|
TO 1-1A-8, Structural Hardware Manual
|
|
What is maximum wear on a control cable?
|
40%
|
|
How many strands can be broken on a hoist cable?
|
0
|
|
How much longitudinal movement is allowed in a non-flared tube end?
|
1/64 inch
|
|
What equalizes pressure at altitude for a C-130?
|
Outflow valve
|
|
How can you tell a flexible hose is straight?
|
Line from one end of hose to the other, (Lay Line)
|
|
What is the correct way to install a rod end?
|
Measure or count threads????
|
|
What type of damage on a turbine blade has multiple lines that emanate from a single point?
|
Galling
|
|
What mark is normal CG expectation?
|
4
|
|
How long do you have to send a message with an "O" designator?
|
30 mins
|
|
What can the CDAR not do?
|
Alcohol screening
|
|
What is EMI used for?
|
Used to correct a deficiency
|
|
What can EMI not withhold?
|
Deprive a person of his/her normal liberty as a form of punishment
|
|
What cannot be taken away without approval from the CO?
|
Normal liberty
|
|
How many paces do you stop prior to saluting an officer?
|
6
|
|
What is the commandants quality award?
|
The commandants Quality Award uses the Malcolm Baldrige Quality Award (MBNQA) criteria
|
|
What is a Air Force Tech Sgt?
|
E-6, 5 chevrons
|
|
What are the types of administrative remarks?
|
Accession, Assignment and transfer, Performance and discipline, Separation, SRB and Selective reserve SRB
|
|
What transfer priority is given to a member assigned to a ship INCONUS?
|
Pri 3
|
|
On your performance evaluation you must be above what mark to be eligible for the SWE?
|
Unsatisfactory
|
|
Selective reservists are generally authorized how many inactive duty training drills (IDT)?
|
48
|
|
What is the age requirement for the Coast Guard Academy?
|
18-22
|
|
What is the maximum bulk for males hair?
|
1 1/2 inches from scalp
|
|
How much time in service to become E-8?
|
10 years
|
|
Where can you use tobacco products?
|
Smoking is prohibited in common areas, bachelor quarters and family quarters?
|
|
What is not considered an alcohol incident?
|
When a member seeks help by self-referral
|
|
What cutter made one of the first captures of the war of 1812?
|
Jefferson
|
|
What is SAPP?
|
Used for releasing information- Security, Accuracy, Policy and Propriety
|
|
How big are the cuffs on the ODU when rolled?
|
3 inches
|
|
Who can authorize the use of temporary scaffolds and check stands?
|
Safety Officer
|
|
How many times is air cycled in a battery shop?
|
Three to four air changes per hour
|
|
What gas is produced by Ni-cad batteries that is explosive?
|
Hydrogen gas
|
|
How high off the ground are electrical outlets to be in a hangar?
|
18 inches
|
|
How often are oily rags disposed of?
|
Daily
|
|
How far do you store flammables from a stove?
|
10 feet
|
|
What is required on a check stand used for fuel cell maintenance?
|
Personnel static discharge plate of copper or zinc, grounding straps attached to the legs of the stand
|
|
What color are shock hazards?
|
Cut, crush, burn or shock (Orange)
|
|
What size cross is used for first-aid equipment?
|
12 inch green cross about twelve feet off the floor on walls and columns
|
|
What type fire extinguisher do you use for class "D" fire"
|
Dry powder
|
|
What type fire wall should a hangar lean-to have?
|
Separated from the main hangar by 1 hour fire wall
|
|
What manual is used for guidelines of flight safety?
|
Safety and Environmental Health Manual 5100.47 (series) provides specific guidance for the flight safety program
|
|
Who is in charge of the flight safety plan at an air station?
|
Commanding Officer
|
|
What class mishap requires a formal mishap board?
|
Class A and B
|
|
What decible level requires double hearing protection?
|
Above 104
|
|
What decible level requires single hearing protection?
|
Above 84
|
|
What manual is used for hearing conservation?
|
M5100.47
|
|
What type of tag is attached to equipment that can cause a hazard to personnel?
|
CG-5082, Hazardous Condition Notification
|
|
When is ORM used?
|
It is not limited only to unit or mission operations as the Coast Guard usually defines them.
|
|
What is a TIMI?
|
Technical Information Maintenance Instruction, used for local maintenance activities
|
|
What standard must tools be when used on CG air craft?
|
SAE
|
|
What manual lists minimum lighting requirements for shops?
|
Civil Engineering Manual, COMDINST M11000.11 (series)
|
|
Who ensures a unit has an adequate towing plan?
|
CO
|
|
Who ensures a unit has a calibration program?
|
CO
|
|
Who can authorize a CF or PP?
|
Engineering Officer or designated representative
|
|
Who can authorize changes to a units parts allowance?
|
Item Manager
|
|
Who designates the aviation gas free engineer?
|
CO
|
|
How much is the flashpoint of JP-5 lowered by adding icing inhibitor?
|
4 degrees F
|
|
What manual describes how many manuals an air station can have?
|
CGTO PG-85-00-50 TIMOS
|
|
What is the PH level of wash rack water?
|
Between 6 and 8
|
|
How often is emergency egress training completed?
|
Annualy
|
|
How do you mark an empty cylinder?
|
Chalk
|
|
If you receive new shop equipment, when do you paint it?
|
When original paint requires re-paint
|
|
How high off the ground are the switches for horizontal hangar doors?
|
4 feet
|
|
How long of a delay does horizontal hangar doors have before opening or closing?
|
5 seconds
|
|
What manual is used for guidence on air craft test flights?
|
M13020.1F
|
|
What is the precedence or order of maintenance directives?
|
ACMS, CGTO, Air Force TO, Navy TO and commercial
|
|
How long are completed ACMS cards kept by maintenance control?
|
90 days
|
|
What is the availablity rate of a three helo unit in the month of December with a NMCT of 781?
|
24 hours x 31 days=744
744 x 3 helos = 2232 hours NMCT 781/2232 = 35% 100%-35 = 65% availability rate |
|
What can a class C maintenance facility perform?
|
Repair (not overhaul), test, and return to servicible status of unservicible aeronautical components and equipment
|
|
Who is the president of the permanent mishap board?
|
XO
|
|
How long are you grounded after donating 300cc's of blood?
|
3 days (72 hrs) after donating 200cc's or more of blood
|
|
What type of check flight is not critical to personnel or aircraft?
|
Flight V
|
|
Who can approve a flight after precautionary landing with minor damage and no structural damage?
|
Once EO or other maintenance officer has determined no structural damage, CO may clear AC for flight
|
|
Who can approve a flight after precautionary landing for major damage and some structural damage?
|
Commandant CG711 with technical concurrence from CG41
|
|
What officer is in charge of facilities?
|
Facilities Engineering Officer
|
|
What is the maximum flight hours you can fly in thirty days?
|
50 hrs in seven days
125 hrs in 30 days |
|
How many hours will deadheading count towards mission hours?
|
One half of the hours deadheading will count against crew mission time but no deadheading time will count as crew mission time
|
|
What is used to preserve engine fuel lines?
|
Mil-PRF-6081 Grade 1010
|
|
How long is level one preservation good for?
|
90 days
|
|
What is used to preserve engine oil lines?
|
Maintain clean and full
|
|
What is level 2 aircraft preservation?
|
Tape and barrier material to the application of a top coat, with the option of a strippable coating for shipment of aircraft only
|
|
How much do you test a repaired engine sling?
|
200%
|
|
How do you mark a special JOAP sample?
|
Red boarder on tag and outside of box
|
|
What is the basis for ACMS?
|
Maintenance Requirements List (MRL)
|
|
What percentage of shelf life must remain when receiving rubber hose from the manufacturer?
|
60%
|
|
What causes secondary damage in an aircraft mishap?
|
Secondary damage is a failure that is usually far removed from the primary damage and is caused by the transmission of shock loads along structures
|
|
What is the maximum size of a crack in a jack leg?
|
1 inch
|
|
How do you fix a 3/4 inch crack in a jack leg?
|
Weld
|
|
A 5 degree change in temp will cause what percentage of pressure change in a tire?
|
1%, as temp increases pressure increases and decreases as temp decreases
|
|
What does R2 indicate on the side of a tire?
|
The tire has been re-treaded 2 times
|
|
An army master sergeant is equal to what?
|
E8-SCPO
|
|
What is the time in service for E-8?
|
10 yrs
|
|
When can you advance to warrant and selected for another program?
|
When selected for warrant you are removed from the advancement list, have 60 days to turn down warrant
|
|
What cannot be taken from you with NJP?
|
Normal Liberty
|
|
How many days can appeal NJP?
|
5 cal days
|
|
What is the time in service required for CWO?
|
8 yrs
|
|
What cutter captured 500+ migrants in 1995?
|
CGC Dauntless 578 migrants
|
|
Environmental protection started when?
|
1822 Timber reserve for Navy at time of RCS
|
|
What year did Navy ratings begin?
|
1917
|
|
Who is a medal of honor recipient other than Munro?
|
Marcus A Hannah
|
|
What is the priority level for transfer from ISC Honolulu?
|
Pri 4
|
|
What is the hazardous waste management manual?
|
M16478.1b
|
|
How often do you check the humidity indicator on a canned engine?
|
28 days
|
|
What is the manual for JOAP?
|
NAVAIR 17-15-50.1
|
|
How many MSRs are there?
|
7 total Aviation life support, Avionics support,Ground rescue assist, Support equipment, DC, and PA
|
|
Who is in charge of the fuel program?
|
CG-41
|
|
Who approves aircraft transfers?
|
CG-711
|
|
Who approves devices hoisted by helicopters?
|
CG-711
|
|
What are cads inspected for?
|
Date and condition
|
|
What is the swirl for on a fuel nozzle?
|
Better atomize the fuel for more even and efficient burn.
|
|
What is the first thing required when removing an ignitor on an APU?
|
Disconnect the lead from the ignitor first or measure shim???
|
|
What is the purpose of a plenum on an APU?
|
stabilize intake air
|
|
What controls the speed of air entering/exiting an engine?
|
guide vanes
|
|
What increments are universal protractors measured in?
|
1/10 of a degree
|
|
One revolution of a MRB is called what?
|
Blade track
|
|
An oil vent line replaced by a fabricated line gets tested to what PSI?
|
2 x system operating pressure
|
|
How early can a high time component be changed?
|
30 days/10%
|
|
When does an ASR start (time) begin?
|
0001
|
|
How many ACMS MSRs are there?
|
4- ALSE, AS, GS, and PA
|
|
What are the Coast Guard missions?
|
Maritime Safety, Maritime Mobility, Protect Natural Resources, Maritime Security and National Defense
|
|
What kind of damage is smooth along the focal point of a gear?
|
Brinelling
|
|
How many major sections of an APU?
|
3
|
|
If blade track increases as speed increases what needs to be adjusted?
|
Trim tabs
|
|
What are tires in a cage pressurized to for test?
|
50% or 100psi
|
|
Where do you log discrepancies at PDM when EAL is in contingency mode?
|
A/C paper logbooks, 4377, 5181 ???
|
|
What are common faults in continuous loop fire detectors?
|
Short, kink, dent
|
|
What is fire protection tape symbol?
|
Brown tape with squares
|
|
What is fuel label tape?
|
Red with four pointed star
|
|
How often are flight records reviewed?
|
Daily
|
|
How often are COMNDINST reviewed?
|
Every 4 yrs by the originator
|
|
How many hours away from home station is an aircraft considered deployed?
|
12 or more continuous hours
|
|
Safety of flight issues are announced how?
|
Urgent interim message
|
|
What might you fill out if you have a damaged component/shipping container?
|
SF361
|
|
When do you send a message to ALC for an engine
|
When the engine is removed for routine inspection no message required, if Non-RFI notify ASAP or email
|
|
What is the safety compliance code as it pertains to respiratory guidance at MLC?
|
TC
|
|
What is the HU25 engine vibe test set?
|
Rotortuner 5JS+
|
|
A cam on a nose L/G is used for what?
|
centering
|
|
What is actuated at full extension on a strut?
|
Squat switch???
|
|
Where does bleed air come from?
|
Various stages of the compressor
|
|
What prevents inside cabin pressure from exceeding outside pressure?
|
Pressure relief valve
|
|
What is the temperature of wash rack water?
|
120-140 degrees
|
|
What prevents cabin over pressurization?
|
Safety valve
|
|
How many days before you need warmup flight?
|
30 days
|
|
What is the draw weight of a tow bar?
|
Read tow bar plate and x10
|
|
What is the wear limit on an engine lift sling cable?
|
40%
|
|
How many wires on a 2x7 cable?
|
2 strands 7 wires
|
|
What riser is used for 3/16 cable tested at 600lbs?
|
#2
|
|
What are the two types of gunners belts?
|
Rotor wing and fixed wing
|
|
What type patch and shape is required for a high stress area?
|
Same type material and following repair must have original strength, shape and contour
|
|
When does temp and pressure drop in an air cycle system?
|
Expansion valve/ evaporator
|
|
What are three purposes of oil?
|
Cool Clean and Lube
|
|
What is the computerized program used to monitor safety and health?
|
Occupational Medical Monitoring Program
|
|
Who was the first MCPOCG?
|
BMCM Calhoun
|
|
What class lasts 17 weeks?
|
OCS
|
|
Eagle captured 2 vessels during what war?
|
Quasi
|
|
How many stripes on CG ensign?
|
16
|
|
What is non-resident training?
|
EOCT, correspondence courses
|
|
When do you get a special set of marks?
|
92 days for E6 and below, 184 days for E7 and above, more than 19 drill periods, advancement to E7, detachment, and PCS
|
|
Who is the 3307 used for in an alcohol incident?
|
Enlisted
|
|
What is the award form number?
|
CG 1650
|
|
When do ignitors activate?
|
After air has entered from the compressor and before fuel has entered the combustion chamber
|
|
What is used to inert a fuel tank?
|
Nitrogen
|
|
How many pounds of luggage are allowed on Space A flight?
|
50lbs
|
|
Where would you not consider using aluminum alloy tubing?
|
Airborne hydraulics
|
|
What is the respirator manual?
|
COMDINST M6260.2D
|
|
What is used for help with EAL?
|
EAL help page
|
|
Who can suspend ACMS?
|
CO of ALC
|
|
Who authorizes repair to minor and major damage?
|
ALC engineering
|
|
How long can CADs be extended without approval?
|
Never
|
|
Excessive heat and centrifugal force on turbine blades is called what?
|
Growth
|
|
What degree of countersunk rivets are used on CG aircraft?
|
100 degree
|
|
What method of NDI is used on honeycomb composite?
|
Ultrasonic
|
|
How is an ACR updated after it is approved?
|
Processed by ALC, Reviewed by IM, and updated VIA AMMIS
|
|
How close can an electric cargo truck be to an A/C while fueling?
|
50'
|
|
How often are slings, shackles, etc NDIed?
|
Annualy
|
|
How long do you have to report discreps after PDM?
|
30 days for the first 14 days
|
|
Who is the lowest ranking officer that can approve the flight schedule?
|
Operations Officer
|
|
Where is the MDL found in ALMIS?
|
ALMIS DSS reports under Unit Maintenance Reports
|
|
MORPT?
|
Monthly unit operating statistics, hours rounded to whole hr, Report entered into ACMS no later than the 7th day of the report
|
|
What 265 parts require expedition?
|
Type 1
|
|
When do you not need to use the simplified acquisiton manual?
|
< $500
|
|
How is calibration of tools tracked?
|
SR (special requirements)
|
|
Who is responsible for tracking of tools?
|
Commanding Officer
|
|
Who is the chairman of the unit safety commitee?
|
Executive Officer
|
|
Who approves the use of temporary check stands?
|
Safety Officer
|
|
What is volatility?
|
The measure of the tendency of a liquid substance to vaporize under given conditions?
|
|
What is the manual for fuel servicing?
|
PG 85-00-170 or COMDINST M13001.1
|
|
How long is Level II preservation good for?
|
1 year
|
|
How long can an MSR be extended?
|
Never
|
|
How do you proof load engine slings?
|
Replaced or annual insp 100% of rated load, Repaired slings 200% of rated load
|
|
What are two types of respirators?
|
Air purifying and atmosphere supplying, annual training, medically evaluated before fit test
|
|
How many steps in troubleshooting?
|
5- Analyze the discrep, Determine the trouble, Locate the trouble, Corrective action, and ops check
|
|
How long do you have to ship Type 1 materiel?
|
ASAP no later than 15 days
|
|
How often is engine wash water tested?
|
Semi-annualy IAW MSR
|
|
How much icing inhibitor (Prist) is added to fuel?
|
.10-.15% by volume
|
|
How long do you have to make changes to pubs?
|
5 cal days
|
|
What is the lead time for replacing GSE?
|
3 years
|
|
How long are flight pay and HDIC pay records kept at the unit?
|
3 years
|
|
What is the PH level of wash rack water?
|
between 6-8
|
|
SELRES members are authorized how many paid Active Duty for Training (ADT) days per fiscal year?
|
12 (ADT) and 48 for innactive duty drills (IDT)
|
|
An enlisted member may not be directed to perform EMI for more than how many hours per day?
|
2 hrs
|
|
On what date did congress authorize the capture of armed French vessels hovering off the U.S. coast?
|
May 28,1798 (Quasi War)
|
|
Which cutter captured 10 prizes during the Quasi-War with France?
|
Cutter Pickering
|
|
During the Quasi War, cutters captured how many prizes and aided in the capture of two others?
|
18 prizes
|
|
Which cutter was run ashore on Long Island, the crew dragged her guns to a high bluff and fought the British from there?
|
The Eagle
|
|
Which cutter captured the first prize of the War of 1812 with England?
|
Cutter Jefferson
|
|
On what date did congress declare war with Mexico?
|
1846
|
|
Which cutter is credited with firing the first naval shots of the Civil war?
|
The Harriet Lane, 1861
|
|
When did the U.S. enter WWI?
|
April 12, 1917
|
|
During WWI, the Coast Guard was under the department of the?
|
Navy
|
|
One of our first successful attacks on a submarine involved the 165' cutter?
|
Icarus
|
|
During WWII, which cutter sank an enemy submarine by ramming it?
|
Cutter Campbell, 1943
|
|
Which is an example of administrative remarks that may be entered on a CG-3307?
|
Selective Re-enlistment Bonus
|
|
Romantic relationships between members are unacceptable at units?
|
Less than 60 members, supervisor/subordinate, same cutter, Chief/junior enlisted and/or disrupts daily business
|
|
What is the first step in the ORM process?
|
Define mission tasks, Identify hazards, Assess risk, Indetify options, Evaluate risk vs. gain, Execute decision and Monitor situation
|
|
What is the second step in the ORM process?
|
Define mission tasks, Identify hazards, Assess risk, Indetify options, Evaluate risk vs. gain, Execute decision and Monitor situation
|
|
What is the third step in the ORM process?
|
Define mission tasks, Identify hazards, Assess risk, Indetify options, Evaluate risk vs. gain, Execute decision and Monitor situation
|
|
Coast Guard T.O.s are published under whose authority?
|
Chief, Aeronautical Engineering Division, Office of Engineering Logistics and Development
|
|
What form will be used to submit changes to flight manuals?
|
AF Form 847
|
|
What is the TIMOS process guide?
|
CGTO PG-85-00-50
|
|
What is the Aeronautical Engineering Corrosion Control Program process guide?
|
CGTO PG-85-00-60
|
|
Can low cycle fatigue limits be extended?
|
NO
|
|
Who is the lowest authority to suspend scheduled maintenance?
|
CO of ALC
|
|
Where would you find detailed guidence on the management of flight pay?
|
COMNDINST M7220.39 (series)
|
|
Who is responsible for the implementation of an equipment calibration program?
|
Commanding Officer
|
|
How long do you keep an expired Maintenance Instruction?
|
6 months
|
|
Who may approve repairs to aircraft primary structures?
|
ALC engineering
|
|
How often are oily waste rag containers required to be emptied?
|
Daily
|
|
How often are fire extinguishers hydrostatically tested?
|
12 yrs
|
|
Major corrosion discrepencies for aircraft going to PDM are documented on what form?
|
AFTO Form103 (C130) all others are logged in EAL
|
|
What is the form number for an unsatisfactory report tag?
|
CG 1577A
|
|
Post PDM report includes what type of discrepancies?
|
Major and Minor
|
|
An email must be sent to ALC when an engine is?
|
Removed for unscheduled maintenance, is unserviceable, and once it is serviceable after repair
|
|
Upon receipt of shipping orders for unserviceable Type 1 materiel, how long does the unit have to ship the part?
|
ASAP but not later than 15 days from receipt of the orders
|
|
How long do you have to return a repairable 265 part?
|
15 days
|
|
Who must give approval for a change kit to be used on an aircraft it is not assigned to?
|
ALC
|
|
A TCTO change kit marked SPAR is installed on what?
|
Spare components
|
|
An uninstalled TCTO change kit for a specific aircraft/engine will?
|
Accompany the aircraft on all ferry missions unitl incorporated
|
|
Who may authorize modifications or changes to aircraft?
|
Commandant CG-41
|
|
If an aircrew accrues seven hours of flight time how many hours of bed rest should they have?
|
8 hours
|
|
What is recommended to contain composites after a mishap?
|
Floor wax, double plasic bag for damaged components
|
|
What is the deepwater designator for the 5th and 6th digit of a NSN?
|
DW
|
|
How many people must be appointed to a board of survey for a loss due to negligence?
|
3 members
|
|
What does "AS" stand for in the MSR?
|
Avionics Support
|
|
Who has final approval authority for a CG-22 affecting a maintenance procedure?
|
Reliability Centered Maintenance Systems Manager
|
|
Who can approve a one-time order of publications?
|
ALC Technical Publications Sections
|
|
If an aircraft is being transfered form one unit to another and the losing unit provides the ferry crew, when is custody transferred?
|
Upon arrival at gaining unit
|
|
What percent of wear is allowed on the outer wires of a 7x19 cable?
|
Less than 40% wear, 6 broken strands per inch in non-critical areas and no broken strands in critical areas
|
|
How long is the shelf life of bulk synthetic rubber hose?
|
5 years from date of delivery to unit and 8 years from the manufacturer cure date
|
|
After a nut for a flared tube is seated how much more is the max you can tighten it?
|
1/6 turn additional, 1/3 total no more
|
|
What type of corrosion happens when two different metals are in contact with eachother?
|
Galvanic
|
|
What does corrosion on magnesium look like?
|
White powdery
|
|
What type of corrosion does graphite cause?
|
Galvanic
|
|
What is considered light corrosion?
|
One Mil (0.001 inch)
|
|
What barrier material is used for level 1 preservation?
|
Tape and Barrier, 90 days
|
|
What barrier system is used for level II preservation?
|
Strippable coatings, tape and barrier and top covers, 1 year
|
|
At what percent humidity does desicant and humidity indicator require replacement?
|
40% Re-check indicator within 72 hours
|
|
What is the maximum size crack on any non-load bearing component of a jack that may be repaired by welding?
|
1 inch long, stop drill and weld
|
|
In the event of a loss of pressure control, what prevents the cabin from over-pressurization or negative pressure situations?
|
Cabin air pressure (Safety Valve)
|
|
Why are some hydraulic reservoirs pressurized?
|
For situations where atmospheric pressure is not adequate enough to supply the pump with sufficient fluid pressure
|
|
How many major sections does an APU consist of?
|
3, Compressor, Power Turbine and Accessory???
|
|
What is the first step in troubleshooting an engine start discrep?
|
Analyze the discrep
|
|
What is used for engine fan vibration analysis on an HU25?
|
RT-5 JS+
|
|
Sea dye marker will remain an effective target in moderate seas for how long?
|
2 Mi at 3000'/ 20-30 min (ceases after 1 hr)
|
|
Litters used by Coast Guard and Aux vessels that are used for hoisting will have what stenciled on them?
|
"Helicopter Hoistable"
|
|
What does a sequencing valve on landing gear do?
|
Closes the landing gear doors after the gear is retracted and before the gear is extended
|
|
If the track of a main rotor blade changes at different air speeds, what should you adjust?
|
Trim tabs
|
|
What article of the UCMJ covers search and seizure?
|
If there is probable cause or not Art. 315
|
|
Who is responsible for maintaining firefighting equipment?
|
Facilities Engineering Officer
|
|
In what year were ten modern cutters transferred to Great Britain on lend-lease?
|
1941 (WWII)
|
|
Who is responsible for assisting the CO with setting up and maintaining a confined space entry program?
|
The Aviation Gas Free Engineer will normally be the QA Officer, AEO, or Maintenance Officer
|
|
Lifting slings should be replaced after what percent of cable wear?
|
Worn 40% of the original diameter
|
|
What does the acronym SPE stand for in regards to ORM?
|
SPE (Severity, Probability, Exposure) Risk= Severity x Probability x Exposure
|
|
What is an alternative to the SPE model?
|
GAR (Green, Amber, Red) assessing risk
|
|
The Revenue Cutter Service was the only naval service until joining the department of the Navy in what year?
|
April 1917 (WWI)
|
|
How does a labyrinth seal prevent leakage?
|
Allow a small amount of air leakage to ambient (used in superchargers) oil is then blown-back
|
|
What is the most critical area for compressor blade damage?
|
1 1/2 - 2 1/2 inches from outside edge??? or blade root
|
|
Who is responsible for designating QA personnel and signing their letter?
|
Engineering Officer
|
|
4 drops of fuel in one minute is what class of fuel leak?
|
Running leak
|
|
What is the preferred method of finding a fuel leak?
|
Torn paper or powder
|
|
Why is smoking prohibited in the vicinity of a Lead Acid Battery shop?
|
High hydrogen gas concentrations
|
|
What item is used as a secondary measure of leak prevention on a tire?
|
Valve cap
|
|
When is the AFTO 103 submitted to ALC before C-130 PDM induction?
|
45 days prior to induction
|
|
How long do you have to report class D or E mishap?
|
21 Days (14 days for class C and immediate for class A,B)
|
|
What report in ALMIS would you look for scheduled maintenance requirements?
|
MDL
|
|
Consumable items, less avionics, with a unit price of $250.00 or less is what type?
|
Type 3
|
|
The cold weather kit for aircraft will support how many aircrew personnel?
|
4
|
|
The hydraulic unit for purging an aircraft hydraulic system must have what size filter?
|
3 micron
|
|
What is required to be done to a hydraulic system after completion of a successful purge?
|
Shall be subjected to a period of flushing and recirculation cleaning to ensure adequate decontamination
|
|
What is a portable test unit used to detect solids in fuel?
|
AEL MK III tester, AEL MK I is used for free water
|
|
If you fabricate a new 24" piece of tubing, at a minimum, where should you label it?
|
At least one band on each 24" segment, in each compartment the tubing passes through. Longer than 24" one band at each end of the tubing
|
|
How often are units required to complete a safety survey?
|
Annually
|
|
An "R" preceding the stock number in a NSN index of the GSA supply catalog indicates that the item is managed by?
|
Restricted requisitioning- Government furnished material. Item is centrally procured???
|
|
Who do address urgent interim UR messages to involving safety of flight items?
|
ALC: Info Commandant (CG-41), Prime Unit for the aircraft involved , and ACMS
|
|
How is a hoist operator made aware that they are coming to the end of their cable?
|
Change in hoist speed to 50 fpm, at approximately last 10', also first and last 20' of usable cable is colored orange
|
|
What is an indication of a failed rivet?
|
Chipped or cracked paint
|
|
Air-stations that are authorized to repair components are given what designation code?
|
Class "D" all air-stations are Class D
|
|
What is the 01-1A-1?
|
General Manual for Structural Repair
|
|
What report can the Commandant view that outlines the operating statics for each aircraft?
|
MORPT
|
|
Where do you get EAL contingency forms?
|
In EAL under "EAL Forms"
|
|
Before an aircraft is placed in desert storage what do you wipe the piston of an actuating cylinder with?
|
Hydraulic Fluid Mil-H83282, or whatever fluid is in the cylinder
|
|
Changes to ALMIS are routed through the supervisor and on to whom?
|
ALC Information Systems Division
|
|
What is the five major divisions of the DHS?
|
Border and Transportation Security, Emergency Preparedness and Response, Science and Technology, Info. Analysis & Infrastructure Protection, and Management
|
|
How much of the exhaust gas energy is absorbed in turning the turbine?
|
60 - 80%
|
|
Who is in charge of Aviation Safety?
|
CG-1131
|
|
In what manual would you find information on ordering Navy pubs?
|
PG-85-00-50 TIMOS
|
|
What is the Hazardous Workplace Condition form?
|
CG-5082, located at site for three days or until condition is corrected
|
|
What manual has specific guidance on QA?
|
PG 85-00-110
|
|
What is the purpose of a freewheeling unit on a helicopter?
|
Allows engine disengagement while auto-rotation. In the event of an inoperative engine, the freewheeling unit allows the accessory module to be driven by the main transmission
|
|
What is the maintenance instruction for an inspection or procedure that is continuing in nature?
|
CAMI (continuing action maintenance instruction)
|
|
In what manual would you find information on a PR for construction costing $25,000?
|
PR's for construction request are limited to $2,000.00
|
|
The flexible coupling in between driveshafts is know as what?
|
Thomas Coupling
|
|
What are the three sections of an APU?
|
Power section, a reduction section, and appropriate controls and accessories
|
|
Who can extend MDL extensions?
|
Product Line Engineering Cell Leader
|
|
What year did we begin port security?
|
June 22,1941
|
|
What mission did DHS adopt?
|
Safeguard, Maintain, Ensure, Protect, Coordinate
|
|
Who is responsible for publishing/originating T.O.s?
|
Chief Aero Engineering Division, Office of Engineering Logistics and Development, USCG, and distrubuted IAW COMDTNOTE 5605
|
|
How often is a salvage kit equipment/wire ropes inspected?
|
Visually inspected annually
|
|
How long to ship 265 material?
|
With appropriate documentation within 15 days of removal
|
|
What is the UR tag?
|
CG-1577-A (red, white and blue)
|
|
What manual is used for all HAZMAT transported on CG aircraft?
|
AF MAN 24-204
|
|
What are hyd struts wiped with for desert storage?
|
PD-680 Type II
|
|
How far must pressurized cylinder be from combustibles if there is no burn wall?
|
20ft
|
|
How many types of aircraft transfers are there?
|
3- Unscheduled depot level maintenance, Temporary, and permanent
|
|
What form is an aircraft shortage reported on for an A/C tranfer?
|
OPNAV 4790/112
|
|
Air station safety is covered in what manual?
|
PG 85-00-110
|
|
Who funds lab testing for new chemicals and processes?
|
Manufacturer or Supplier
|
|
Who can authorize a change kit from one aircraft to another?
|
ALC
|
|
What form is used to log corrosion discrepencies at PDM?
|
CG 4377b
|
|
What percent of a bonding jumper can be broken before replacement is required?
|
1/3 of cable wires
|
|
How much space is allowed between tool rest and grinding wheel?
|
1/8"
|
|
What manual is referenced for fule servicing bonding guidelines?
|
TO 00-25-172
|
|
How often does the CPA provide training?
|
Quarterly- to maintenance personnel
Monthly- to metal shop and corrosion team |
|
Dirt and sand in an oil analysis will show up as what?
|
Silica
|
|
How long are maintenance instructions kept?
|
6 mos after they have been removed or replaced.
|
|
What year did the Navy start the chief rank?
|
April 1, 1893
|
|
In 1995 what CGC rescued more than 500 migrants?
|
CGC Dauntless
|
|
What must be done prior to accepting an aircraft for permanent transfer?
|
Inventory
|
|
What is the Maximum amount for purchase to use the Simplified Acquisition Manual?
|
$100,000
|
|
Avionics Support equipment is in what category?
|
ACMS MSR (common or peculiar)
|
|
All new processes and chemicals must be approved by who?
|
ALC, ISM, and Aging Aircraft Branch
|
|
How many strands of a non-critical control cable can be broken before cable is replaced?
|
7 X 19- 6 wires in one 1 inch
7 X 7- 3 wires in one inch |
|
When installing a steel bolt into a magnesium component, what material should the washer be?
|
Cadmium plated steel washer
|
|
How long after UR is sent will ALC contact unit with phone call or email?
|
If not received by ALC within 60 days
|
|
Dye pen inspection detects what type of flaws?
|
Surface defects in non-porous material
|
|
What type of cleaner is used to remove corrosion on interior strands of cable?
|
None, replace cable for interior corrosion
|
|
What evaluation categories do you not enter a numeric value?
|
Conduct
Recommended or not for advancement |
|
What is the definition of dwell time?
|
The period of time that a process, such as the application of temp and pressure, are held constant
|
|
What is the dollar amount value of type 4 material?
|
$800 or more
|
|
Under what pressure in a hydraulic system is a backup o-ring not required?
|
1,500 psi
|
|
Who is on a board of survey when it is deemed due to negligence?
|
At least 3 people, when available officers
|
|
What revenue cutter is credited with the first narcotics seizure?
|
USRC Wolcott
|
|
What mil-spec does the ATA chapter conform to?
|
S1000D/MIL-STD-1808 numbering system
|
|
What ATA chapter is used for pneumatics?
|
Chapter 36
|