Af 2A655 Cdc Vol 1 Study

Front 1

What is considered the handbook for aircraft maintenance management in the US Air Force?

Back 1

AFI 21-101

Front 2

What are the two basic categories of maintenance

Back 2

On-equipment and off-equipment

Front 3

Who approves the IPI listing?

Back 3

WG/CC.

Front 4

Who is responsible to the operations officer/MX SUPT for the leadership, supervision, and training of assigned personnel?

Back 4

The flight commander/chief.

Front 5

Who directs the overall maintenance effort for their unit?

Back 5

Production superintendent.

Front 6

What group has the primary responsibility for aerospace equipment maintenance?

Back 6

Maintenance.

Front 7

How many squadrons exist within the MXG?

Back 7

3

Front 8

Within MXS, what flight does the hydraulic in-shop fall under?

Back 8

Accessories.

Front 9

Your role in the IMDS process starts with what?

Back 9

Entering accurate data into the CDB.

Front 10

What IMDS subsystem allows the tracking of maintenance actions and has both maintenance and supply data?

Back 10

Maintenance Events.

Front 11

What IMDS subsystem provides an on-line capability for maintenance personnel to document, inquire, and produce retrievals of maintenance actions?

Back 11

JDD.

Front 12

What section of AFTO Form 244 lists discrepancies pertinent to the flight-line mechanic?

Back 12

V

Front 13

How would you write 19 Jan 2011 on an aircraft or support equipment maintenance form?

Back 13

20110119

Front 14

What symbol in the aircraft forms represents the least serious condition?

Back 14

Red diagonal.

Front 15

Which term is not an element of the maintenance training program?

Back 15

Cross-utilization training.

Front 16

Training people to do other tasks in addition to their primary AFSC tasks is called what?

Back 16

Cross-utilization training.

Front 17

Which aircraft periodic inspection is used to detect defects that could have developed during ground operation of an aircraft?

Back 17

End-of-runway

Front 18

What is an advantage of a phased inspection over other inspections?

Back 18

It helps to reduce the out-of-commission time that might be required during a combined HPO

Front 19

Which isochronal aircraft inspection is a “thorough and searching” inspection of the aircraft?

Back 19

Major

Front 20

What MAJCOM operates the entire Air Force material management system?

Back 20

AFMC

Front 21

What does the first part of an NSC indicate?

Back 21

National supply classification.

Front 22

What does the first position of an ERRC identify?

Back 22

Expendability of the item.

Front 23

What does the second position of an ERRC identify?

Back 23

Highest repair level of the item

Front 24

How often does DLA issue FED LOG compact disks

Back 24

Monthly

Front 25

How many search queries can you process at a time with the interactive program in FED LOG?

Back 25

One

Front 26

How many search queries can you process at a time with the batch program in FED LOG?

Back 26

Multiple

Front 27

What computer system allows users to search for a supplier’s specific information, such as their name and address?

Back 27

FED LOG.

Front 28

While conducting an inventory of bench stock you notice a due-out card in one of the bins, what does this indicate?

Back 28

Part is already on order.

Front 29

Normally shop stock usage should not exceed how many days?

Back 29

90

Front 30

Who is responsible for the DLR program?

Back 30

Repairable support division.

Front 31

The standard price of a DLR item is charged against the maintenance unit if the item is not AWP and held for more than

Back 31

60 days

Front 32

Before an item is issued from Supply, Demand Processing must have certain information recorded on what AF Form?

Back 32

2005

Front 33

What form is used to issue equipment on a temporary basis?

Back 33

1297

Front 34

What form does Supply use for a DIFM notice?

Back 34

AF Form 1297.

Front 35

What is an important point to keep in mind when you are describing a discrepancy on an AFTO Form 350 tag?

Back 35

To be very specific.

Front 36

What supply condition tag would be attached to a part that has been repaired and ready to be turned into Supply?

Back 36

DD Form 1574.

Front 37

Once a defect is identified for a CAT I deficiency, the originator must forward the draft DR to the originating point within how many days?

Back 37

1

Front 38

A Category II DR submitted for a defect in workmanship must be forwarded to the originating point within how many workdays?

Back 38

3

Front 39

Air Force property responsibility is imposed “by law” on who?

Back 39

All military and civilian employees

Front 40

If you are in physical possession of a piece of Government property, what kind of responsibility have you assumed?

Back 40

Custodial

Front 41

If you are in physical possession of a piece of Government property, what kind of responsibility have you assumed?

Back 41

Custodial

Front 42

How can personnel be relieved from property responsibility?

Back 42

Turn-in or transfer.

Front 43

Which TO tells us how to maintain and inspect a particular weapons system?

Back 43

Technical manual

Front 44

In the basic TO numbering system, each TO number has a minimum of how many number groups?

Back 44

Three

Front 45

he first number group within a TO number identifies what?

Back 45

The TO category.

Front 46

Which MIDAS TO number group describes the type of TO?

Back 46

Fourth

Front 47

Using the MIDAS TO system, which TO would you use to find a brief description of an aircraft’s system or subsystem?

Back 47

GV

Front 48

What kind of TO contains an in-depth breakdown of each maintenance manual and a master listing of all maintenance TOs?

Back 48

GV

Front 49

What kind of TO contains operational checkout procedures?

Back 49

JG

Front 50

Revisions are made instead of changes when the basic TO consists of what?

Back 50

Eight pages or less.

Front 51

Safety and operational supplements to TOs should be filed in what order?

Back 51

Reverse sequence in front of the basic TO.

Front 52

What TO deficiency report is used to identify immediate corrections that involve safety?

Back 52

Emergency

Front 53

What percent of accidents is caused by nature?

Back 53

Two

Front 54

When temporarily allowing a potentially dangerous condition to exist, you must

Back 54

post warning signs.

Front 55

Which AFOSH standard covers personal protective equipment?

Back 55

91–501.

Front 56

When is the wearing of metal-rim glasses forbidden?

Back 56

When maintaining electrical systems.

Front 57

How is an oil-free nitrogen bottle identified?

Back 57

Two 3 inch black bands around the shoulder.

Front 58

Which mishap prevention tag is used to warn personnel against potential hazards?

Back 58

Caution

Front 59

Ear plugs alone will not protect you above

Back 59

130 decibels.

Front 60

How many feet in front of a rotating propeller should you stand?

Back 60

25

Front 61

What AFI outlines the Nuclear Surety Program?

Back 61

AFI 91–101.

Front 62

What method is used to certify individuals to work on or near nuclear weapons?

Back 62

Personnel Reliability Program.

Front 63

Which statement is not a step in the certification process for the PRP?

Back 63

Interviewing your spouse.

Front 64

A program designed to make sure that a lone individual cannot perform an incorrect act or unauthorized procedure on a nuclear weapon system, is called

Back 64

Two-Person Concept.

Front 65

What program directs the installation of seals and indicators to verify that no one has tampered with or accidentally activated a certified critical component?

Back 65

Tamper Detection Program.