Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
15 Cards in this Set
- Front
- Back
|
What type of starting system does the retrieval system assembly on the E-28 arresting gear use? |
Electric |
|
|
What is the total number of cylinders in the engine of the retrieve assembly of the E – 28 arresting gear |
4 |
|
|
During an aircraft arrest eat with the E28 arresting gear, what reaction actually applies a braking force on the aircraft, bringing it to a stop |
Fluid resistance |
|
|
What is the width of the E28 purchase tape |
8 inches |
|
|
What is the thickness of that e28 purchase tape |
0.0344 of an inch |
|
|
Which of the following indicates that the cross deck pendant of the e28 arresting gear is no longer under the required tension? |
Strobe light |
|
|
Tape pressure roller of the e28 arresting gear is under tension by the |
Springs |
|
|
What is the function of the retrieve assembly on the E 28 arresting gear |
Rewind and tension tape |
|
|
The purchase is made of what type of material |
Nylon |
|
|
How many feet are the donut wire supports position apart from each other |
14 feet |
|
|
How would you identify the original and exact location of the cross deck pendant wire support positions on the runway? |
Paint marks |
|
|
Wire supports must be replaced when they show excessive wear and have radical cracks of ______ or longer |
1 inch |
|
|
What is the minimum cable clearance of the cross deck pendant? |
2 inches |
|
|
The cross deck pendant is made of what type of wire? |
Non-rotating |
|
|
How often is a functional check performed on the arresting gear |
Every 30 days |
