7-Level Cdc's Ure Vol 2 2Ax7X

Front 1

Trainging detachments are admininstratively assigned to which MAJCOM?

Back 1

Air Education and Trainging Command (AETC)

Front 2

Air Education and Training Command training detachments normally do NOT provide what type of training?

Back 2

Ancillary Training

Front 3

The block training method is normally used to teach what Maintenance Training Flight trainging course?

Back 3

Maintenance Orientation

Front 4

Each airframe and powerplant (A&P) specialized course must be completed within how many months?

Back 4

13 Months

Front 5

What is used as a cover folder for an individual's training record?

Back 5

AF Form 623, Individual Training Record

Front 6

Who can designate critical tasks that apply to a specific Air Force Specialty Code (AFSC) in a particular work center?

Back 6

-MAJCOMs
-Supervisors
-Commanders

Front 7

Who must approve a waiver before an individual can be added to the special certification roster (SCR) for a task normally performed by a person of a higher grade?

Back 7

Maintenance Group commander (MXG/CC)

Front 8

In order to be given authority to downgrade a "Red-X" an individual must be approved by the maintenance group commander (MXG/CC) and hold the minimum grade of...

Back 8

Master Sergeant (MSgt)

Front 9

What training phase has these four sub-phases: multiphase, MAJCOM mandatory, freeflow, and maintenance qualification training?

Back 9

Phase II

Front 10

What continuation training consists of academic and practical hands-on courses that complement intial skills trainning received through AETC mission ready airman (MRA) and training detachment(TD) courses?

Back 10

Maintenance qualification

Front 11

How often does the maintenance training flight (MTF) provide a status of training (SOT) briefing to the maintenance group commander (MXG/CC)?

Back 11

Monthly

Front 12

An individual comes due for a training recertification while TDY, on leave, or incapacitated. Provided it has not been more than 60 days since the original due date, how many days are allowed after returning before decertification is required?

Back 12

30 days

Front 13

Who is responsible for conducting an interview with both the trainee and his/her supervisor before a trainee starts a career development course(CDC)?

Back 13

Unit training manager

Front 14

Once you have completed the master task list for your master training plan, your next step is to

Back 14

determine training needs

Front 15

In order to account for unfunded requirements and valid non-maintenance tasks, the logistics composite model (LCOM) allows what percentage of overhead manning?

Back 15

10 percent

Front 16

What element of a logistics composite model (LCOM) study considers weather modeling conditions?

Back 16

Operations requirements

Front 17

What factors are modeled in a logistics composite model (LCOM) manpower study?

Back 17

-Spare parts
-Maintenance people
-Aeorspace ground equipment

Front 18

Manpower authorizations are...

Back 18

Funded

Front 19

A unit manpower document (UDM) does what?

Back 19

-Show the AF specialty code required for a particular position
-Provide detailed information about each manpower requirement
-Show the required grade for particular positions

Front 20

A meeting to discuss manning issues in the maintenance group is normally held on a ________ basis?

Back 20

Monthly

Front 21

What maintenance group office acts as the office of primary responsibility for maintenance analysis referrals?

Back 21

Maintenance data system analysis (MDSA)

Front 22

What agency is normally responsible for monitoring the overall maintenance supply interface and resolving supply support problems?

Back 22

Maintenance supply liaison

Front 23

What are some of the Maintenance supply liaison's duties?

Back 23

-Monitoring the status of back-ordered requisitions
-Advising supervisors on supply management documents
-Soliciting and consolidating inputs to initiate a quick reference list

Front 24

The assets in a high priority mission support kit (HPMSK) should be transferred into the host base's Standard Base Supply System account after how many days?

Back 24

30 Days

Front 25

How often are operating commands required to review permanent readiness spares packages (RSPs)?

Back 25

Annually

Front 26

What expendability, recoverability, and reparability codes (ERRC) must be assigned to an asset before it can be placed on a bench stock?

Back 26

XB3

Front 27

Shop stock should not exceed how many days of usage?

Back 27

90 days

Front 28

Provided it is still serviceable, you are allowed to inspect and re-mark with a new expiration date wich type of shelf life item?

Back 28

Cat II

Front 29

What are obvious signs of pollution?

Back 29

-Oil sheen on standing water
-Stressed vegetation
-Stains on ground

Front 30

Who is responsible for developing a hazard communication (HAZCOM) training plan to notify personnel of all known hazards they may be exposed to in a particular workcenter?

Back 30

Section supervisor

Front 31

In the Maintenance Group, who is responsible for establishing procedures and controls for the local manufacture of tools, parts and other items as required by technical guidance?

Back 31

MXG Commander

Front 32

Who in the maintenance group is responsible for ensuring the capability exists to meet local manufacture requirements?

Back 32

Maintenance Squadtron Operations Officer/Maintenance Superintendent

Front 33

Who must appoint an individual to be an equipment account custodian?

Back 33

Squadron Commander

Front 34

An individual must receive what specific block of supply training before assuming duties as a due-in from maintenance (DIFM) monitor?

Back 34

IIB

Front 35

What is covered under the Precious Metals Recovery Program? which is not?

Back 35

Covered: Silver, Iridium, Rhodium
Not coverd: Copper

Front 36

What Precious Metals Indicator Code (PMIC) indicates that an item of supply does not contain precious metal?

Back 36

Code A

Front 37

What Precious Metals Indicator Code indicates that an item of supply contains a combination of two or more precious metals?

Back 37

Code C

Front 38

What supply tracking document provides information on all document numbers processed during the day?

Back 38

D04, Daily Document Register

Front 39

What supply tracking document is produced daily and lists all back-ordered parts with an urgency of need (UND) code of A?

Back 39

D18, Priority Monitor Report

Front 40

What supply tracking document provides a management product for monitoring issue and bench stock supply support?

Back 40

M-24, Organization Effectiveness Report

Front 41

What Logistics Readiness Squadron (LRS) office accounts for special purpose recoverable authorized maintenance (SPRAM) assets managed on in-use detail records?

Back 41

Equipment Liaison Office (ELO)

Front 42

What is the special purpose recoverable authorized maintenance (SPRAM) flag code for stand-alone spares?

Back 42

Code A

Front 43

What is the special purpose recoverable authorized maintenance (SPRAM) flag code for fault isolation spares?

Back 43

Code F

Front 44

Who is the final authority for reviewing a unit's list of supply assets requiring functional check, calibration, or operational flight programming?

Back 44

Logistics Readiness Squadron (LRS) Chief Inspector

Front 45

Who is in the review chain for items listed as supply assets requiring locally performed functional check, calibration, or operational flight programming?

Back 45

-Operations Officer/maintenance superintendent
-Logistics Readiness Squadron
-Flight commander/Chief

Front 46

Who ultimately determines if the security provided at a transient location is adequate for classified assets installed on an aircraft?

Back 46

Aircraft Commander

Front 47

Who is responsible for the immediate security of classified equipement installed on an aircraft after it makes an emergency landing?

Back 47

Aircraft Commander

Front 48

When the aircraft owner or user does not stay with their aircraft, he/she must arrange for security checks to be accomplished every..

Back 48

3 hours

Front 49

What supply delivery priotiry is appropriate for primary mission aircraft 13 hours after landing?

Back 49

priority 3

Front 50

What supply delivery priority is appropriate for bench stock requirements?

Back 50

priority 5

Front 51

What urgency justification codes (UJCs) are used to show a supply request for bits and pieces to repair a line replaceable unit (LRU) or shop replaceable unit (SRU) spare?

Back 51

Codes AR or BR

Front 52

Before a supply point can be established and located in a maintenance work area, who must maintenance coordinate with?

Back 52

LRS material management element

Front 53

What is the accountability document used for supply points that shows the quantity authroized, on-hand, and due-out?

Back 53

Supply Point Listing

Front 54

When a mission capable (MICAP) part issues and is placed in the tail number bin (TNB), supply personnel notify the

Back 54

Maintenance Operations Center (MOC)

Front 55

When a back-ordered item issues and is placed in the tail number bin (TNB), supply personnel notify the...

Back 55

Aircraft Maintenance Unit's (AMU's) Plans, Scheduling, and Documentation (PS&D) section

Front 56

When items are placed in a aircraft's tail number bin (TNB), what entry is not normally needed?

Back 56

Security classification

Front 57

When the goal is to get a refund or a new item in exchange, what type of deficiency report is submitted?

Back 57

Supply Discrepancy Report

Front 58

Who has the responsibility for overall Deficiency Report program management for the submitting organization or group?

Back 58

Originating Point

Front 59

Who acts as the Deficiency Report focal point between the support point and submitting organization?

Back 59

Action Point

Front 60

Units cannot make local modifications to what type of AF publications?

Back 60

Technical Orders

Front 61

Who is responsible for establishing a maintenace group technical order custodian to administer TO requirements in support of assigned group missions and activities?

Back 61

MXG Commander

Front 62

What are some of the Maintenance Group technical order distribution office duties?

Back 62

-Assisting units in establishing additional TODO accounts
-Advising MXG/CC on TO availability
-Resolving TO availability problems

Front 63

The product improvement Manger is usually assigned to what maintenance group section?

Back 63

Quality Assurance (QA)

Front 64

What are the technical order change priorities?

Back 64

-Urgent
-Routine
-Emergency

Front 65

An improvement that identifies a replacement for hazardous materials or an ozone depletiong substance would be submitted as what technical order change priority?

Back 65

Urgent

Front 66

Who is the final approval authority for waivers of technical order system policies and procedures?

Back 66

HQ/USAF/A4MM

Front 67

What are some of the approved communication methods used for issuing approved technical order waivers or deviations?

Back 67

-Signed letter
-Organizational e-mail
-Defense Message System

Front 68

If a serially controlled iteam is cannabalized (CANN), who is the CANN authority required to notify?

Back 68

Plans, scheduling, and documentation (PS&D)

Front 69

For a unit using the extended cannibalization cycle, the standard time frame for having an aircraft down is...

Back 69

45-60 days

Front 70

How are radiographic inspections accomplished outside the Non destructive Inspections Laboratory calssified?

Back 70

Unshielded

Front 71

When calibrating navigational equipment, an external power unit is attached while towing and aircraft during what type of operation?

Back 71

Compass rose

Front 72

"Red Ball" maintenance defines a situation that requires what?

Back 72

-priority actions
-a sense of urgency
-specific local procedures

Front 73

During "Red Ball" maintenance it is important that expediters have a quick reference list (QRL) available in order to...

Back 73

reduce the time needed to research parts

Front 74

What are some of the members of the Joint Council on Aging Aircraft?

Back 74

-US Army
-US Air Force
-Federal Aviation Administration (FAA)

Front 75

Who appoints an officer or NCO as the maintenance group Aircraft Structural Integrity Program (ASIP) project officer?

Back 75

MXG Commander

Front 76

What aircraft Maintenance Unit (AMU) section is required to ensure Aircraft Structural Integrity Program (ASIP) equipped aircraft are identified as such in weekly schedules?

Back 76

Plans, Scheduling, and Documentation (PS&D)

Front 77

Who is the office of primary responsibility (OPR) for deveolpment of wing procedures for control and management of tools/equipment used on the flight line and in aerospace maintenance industrial areas?

Back 77

Maintenance Group Commander

Front 78

In addition to daily accountability checks, how often must support personnel conduct and document a maintenance group commander standardized inspection of all support section tools and equipment?

Back 78

Annually

Front 79

How many digits make up an equipment identification designator (EID) code used to identify tools and equipment?

Back 79

9 digits

Front 80

In the equipment identification designator (EID) code U6JG00001, what does the third character "J" identify?

Back 80

the unit its assigned to

Front 81

Without a waiver, what is the minimum position an individual must hold before clearing a red X for a lost tool that has NOT been found?

Back 81

Operations Officer or Maintenance superintendent

Front 82

Who is the Quality Assurance (QA) chief inspector directly responsible to for ensuring the required Maintenance Standardization and Evaluation Program (MSEP) functions are performed?

Back 82

Quality Assurance (QA) Officer In Charge (OIC)/Superintendent (SUPT)

Front 83

Personnel should normally be assigned to a unit for how many months before being selected as Quality Assurance(QA) inspectors?

Back 83

6 months

Front 84

What maintenance standardization and evaluation team individual assessment finding is defined as a condition that would endanger personnel or jeopardize equipment?

Back 84

Major

Front 85

What maintenance standardization and evaluation team individual assessment is performed after a technician completes a task?

Back 85

Quality Verificiation Inspection

Front 86

The Wing foreign object damage (FOD) monitor is normally located within the...

Back 86

Quality Assurance section (QA)

Front 87

The wing foreign object damage monitor must notify the MAJCOM FOD manager within how many hours of a FOD incident?

Back 87

24 hours

Front 88

What dollar amount of damage must be exceeded for a foreign object damage (FOD) incident to be used to calculate the FOD rate for a unit?

Back 88

$20,000

Front 89

What time-frame is used for determining whether an item that falls off an aircraft is considered a reportable dropped object?

Back 89

Engine start to engine shut down

Front 90

A dropped object that has resulted in casualties or property damage must be reported IAW..

Back 90

AFI 10-206, Operational Reporting

Front 91

What AF publication provides general guidance for executing an effective maintenance recovery operation?

Back 91

AFI 21-101, Aircraft and equipment maintenance management

Front 92

The maximum total initial duty time (including home station duty, travel time, and recovery site duty upon arrival) that a maintenance recovery team member may be worked before being given 8 hours of uninterrupted rest is...

Back 92

16 hours of duty

Front 93

What maintenance squadron flight is the office of primary responsibility for the maintenance group's crashed, damaged, or disabled Aircraft Recovery (CDDAR) Program operating instruction?

Back 93

Maintenance Flight

Front 94

How often must the Team Chief for the Crashed, Damaged, or Disabled Aircraft Recovery (CDDAR) Program conduct a CDDAR exercise?

Back 94

Annually

Front 95

After initial training, how often must Crashed, Damaged, or Disabled Aircraft Recovery (CDDAR) Team members receive additional academic and hands-on training?

Back 95

Annually

Front 96

What AF Portal link provides access to recurring AF peridocials like Airman Magazine and the Air & Space Journal?

Back 96

AF Elcetronic Publishing (AF e-Publishing)

Front 97

What AF Portal link can be used to access user manuals for various AF computer systems?

Back 97

AF Center for Electronic Distribution of Systems (AFCEDS)

Front 98

Who is responsible for coordinating the number of certified load crew team members in support of aircraft generation planning?

Back 98

Wing Weapons Manager

Front 99

You are primarily concerend with answering the question: "What steps need to be taken?" during which aircraft generation planning area?

Back 99

Aircraft generation actions

Front 100

You are primarily concerned with answering the question: "How long does each step or group of steps take?" during which aircraft generation planning area?

Back 100

Aircraft generation action timing