• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/11

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

11 Cards in this Set

  • Front
  • Back

The employer shall ensure that a worker is provided with, and uses the appropriate ppe specified for each particular job and work location.


T or F

True

It is the employees responsibility to wear, as well as to care for and maintain the equipment.


T or F

True

Hard hat suspension minimum clearance is


A. 2.5 to 3 cm


B. 1.88 cm


C. 1.25 cm


D. 3.25 cm

A. 2.5 to 3 cm

The pressure in a fully charged self-contained breathing apparatus is


A. 31.03 kPa


B. 101.3 kPa


C. 31 030 kPa


D. 15 515 kPa

C. 31 030 kPa

The preferred type of eye protection when working with chemicals or acids is a


A. Face shield


B. Monogoggle


C. Safety goggle


D. Safety glasses

A. Face shield

The air tanks of self contained breathing apparatus may be sized to supply ____ or ____ minutes of air supply and are charged to a pressure of _____ Mpa

30, 60, 31.03

The minimum oxygen partial pressure allowed before breathing apparatus is required is:


A) 22 kPa


B) 25 kPa


C) 15 kPa


D) 13 kPa


E) 18 kPa


E) 18 kPa

An air supply may be required by employees:


1. When regenerating a softener


2. When entering vessels or ducting that have contained anything other than air


3. When entering an electrostatic precipitator that has been bypassed for repairs


4. In a vessel that has been purged with nitrogen


A) 1, 3


B) 1, 3, 4


C) 2, 3, 4


D) 2, 3


E) 2, 4


C) 2, 3, 4

The type of breathing apparatus that incorporates a 5 minute cylinder to allow the user to escape a contaminated area is the:


A) Remote air supply breathing apparatus


B) Self contained breathing apparatus


C) Gas mask


D) Filter type respirator


E) Supplied air breathing apparatus

A) Remote air supply breathing apparatus

Hard hat suspension minimum clearance is:


A) 1 inch


B) 0.75 inch


C) 1.25 inches


D) 0.5 inch


E) 1.5 inches


A) 1 inch

Respiratory equipment that is not used routinely but is kept for emergency use must be inspected:


A) Monthly


B) Daily


C) Semi-annually


D) Yearly


E) Weekly


A) Monthly