Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
11 Cards in this Set
- Front
- Back
The view in an engineering drawing that is usually used as the key view is. A. Front elevation B. Side elevation C. Plan D. Top |
A. Front elevation |
|
Section lines used to indicate specific construction material should generally be drawn at an angle of _____ degrees. A. 30 B. 45 C. 60 D. 15 |
B. 45 |
|
A drawing instrument commonly used to draw parallel lines is the? |
Triangle |
|
In order for a sketch to look like the object it represents, we: A) Use a number of different views B) Use colours throughout the sketch C) Draw the sketch to scale D) Use as much detail as possible E) Make the sketch in proportion |
E) Make the sketch in proportion |
|
To show materials of construction in a sketch we can use: A) Cross-hatching but not hatching B) Shading C) As colour coding D) Section lining E) Colour coding as per NFPA
|
D) Section lining |
|
In a piping layout, _____ line sketches are used. A) Broken B) Thick C) Single D) Coloured E) Light
|
C) Single |
|
Relative to sketching detail we should: A) Use as little detail as possible B) Show detail with colour C) Use as much detail as possible D) Show as many sectional views as possible E) Use at least three views of the object
|
A) Use as little detail as possible |
|
The body responsible for standardizing symbols used to indicate materials of construction in a sketch is the: A) ISO B) ASME C) Canadian Standards Association D) American Standards Association E) ANSI |
D) American Standards Association |
|
One of the most important features of the first lines drawn in a sketch is that they:
A) Show the main proportion of the sketch B) Must all show the object outline C) Should show at least three views for projection D) Are to some scale E) Be very bold
|
A) Show the main proportion of the sketch |
|
When projecting views of an object, the key view is the _____ view. A) Plan B) Right side C) Front D) Bottom E) Left |
C) Front |
|
Foundation or centre lines of a sketch should be: A) Made at the very beginning of the sketch B) Broken lines not continuous C) Always done to scale D) Very bold and extended E) Made for one view and not extended to other views |
A) Made at the very beginning of the sketch |