Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
86 Cards in this Set
- Front
- Back
|
WHAT DOCUMENT PROVIDES YOUR WORK CENTER W/ A LIST OF ACTIVE & CLEARED TAG-OUTS?
|
TAG-OUT INDEX & RECORD OF AUDITS SHEET
|
|
|
WHAT SITUATIONS WOULD REQUIRE YOU TO TAG-OUT THE EQUIPMENT?
|
OPERATING THE EQUIPMENT WOULD PLACE PERSONNEL IN HARM'S WAY
TURNING ON THE EQUIPMENT COULD DAMAGE THE EQUIPMENT |
|
|
WOULD POWERING UP THE MOTOR DAMAGE CIRCUITS IN THE EQUIPMENT REQUIRE THE USE OF A DANGER/DO NOT OPERATE TAG?
|
YES
|
|
|
WOULD TURNING ON THE MACHINE LEAD TO THE RELEASE OF HAZARDOUS ENERGY REQUIRE THE USE OF A DANGER/DO NOT OPERATE TAG?
|
YES
|
|
|
IF THE EQIPMENT USED REQUIRES THAT YOU ACCOUNT FOR SPECIALIZED INSTRUCTIONS REQUIRE THE USE OF A DANGER/DO NOT OPERATE LOG?
|
YES
|
|
|
WOULD OPERATING THE VALVE REQUIRING AUTHORIZATION FROM A SUPERVISOR REQUIRE THE USE OF A DANGER/DO NOT OPERATE TAG?
|
NO
|
|
|
WHAT IS THE FIRST STEP IN TAGGING OUT A PIECE OF CESE?
|
OBTAINING THE AUTHORIZING OFFICER'S PERMISSION
|
|
|
WHAT FUNCTIONS IS A TAG-OUT INDEX & RECORD OF AUDITS SHEET USED FOR?
|
ASSIST IN AUDITNG TAG-OUTS
ENSURE THAT TAGS ARE ISSUED SEQUENTIALLY BY SERIAL #s ISOLATE IGNITION SOURCES PROVIDE A LIST OF ACTIVE & CLEARED TAG-OUTS |
|
|
WHOSE RESPONSIBILITY IS IT TO PERFORM MAINTENANCE REQUIREMENTS?
|
MAINTENANCE PERSON
|
|
|
WHOSE RESPONSIBILITY I SIT TO MMAINTAIN AN ACCURATE & CURRENT LOEPs
|
WORK CENTER SUPERVISOR
|
|
|
WAT IS A READY REFERENCE OF PLANNED MIANTENANCE REQUIRERMENTS OR WCS & THE PEOPLE ASSIGNED TO THE SECTION?
|
WORK CENTER PMS MANUAL
|
|
|
WHAT DOCUMENT LISTS THE EQUIPMENT IN THE SECTION THATHAS MINTENACE REQUIREMENTS?
|
LOEP
LIST OF EFFECTIVE PAGES |
|
|
WHAT IS THE BASIC PMS REFERENCE DOCUMENT?
|
MIP
MAINTENANCE INDEX PAGE |
|
|
WHAT FORMS MUST MATCH BEFORE YOU BEGIN MAINTENANCE?
|
THE MRC MUST BE VERIFIED AGAINST THE MIP
THE MIP # MUST BE VERIFIED AGAINST LOEP |
|
|
WHAT DOCUMENT ON THE MASTER PMS DISC CONTAINS A LIST OF MIP & SYSTEM EQUIPMENT NOT REQUIRING PMS ASSIGNED TO EACH WORK CENTER?
|
LOEP
|
|
|
WHAT FORM PROVIDES DETAILED PROCEUDRES FOR PERFORMING MAINTENANCE REQUIREMENTS & DESCRIBES THE RESOURCES NEEDED TO ACCOMPLISH A SPECIFIC REQUIREMENT?
|
MRC
|
|
|
WHAT BLOCK OF A MRC WOULD CONTAIN CAUTION NOTES?
|
SAFETY PRECAUTION
|
|
|
WHAT ARE THE STEPS FOR TAGGING OUT CESE?
|
1. OBTAIN APPROVAL FROM WCS TO PERFORM TAG-OUT.
2. ENSURE THAT THE IGNITION SORCESARE IN OFF POSITION. 3. FILL OUT BOTH SIDESS OF A DANGER/DO NOT OPERATE TAG. 4. ATTACH THE TAG TTO THE STEERING WHEEL OR IGNITON SOURCE. 5. COMPLETE MAINTENANCE ACTION. 6. VISUALLY INSPECT THE AREA FOR CO-WORKERS OR EQUIPMENT THAT COULD BE HARMED WHEN EQUIPMENT IS RESTARTED. 7. REMOVE TAG FROM DEVICE 8. ERASE INFO FROM DEVICE 9. RETURN TAG TO WCS |
|
|
WHAT BLOCK ON NTHE MRC CONTAINS THE INFORMATION ON WHO IS QUALIFIED TO COMPLETE THIS TASK?
|
RATES
|
|
|
WHAT DOES 3-M MEAN?
|
MAINTENANCE, MATERIAL, MANAGEMENT
|
|
|
WHAT DOES PMS MEAN?
|
PLANNED MAINTENANCE SYSTEM
|
|
|
WHAT DOES MDS MEAN?
|
MAINTENANCE DATA SYSTEM
|
|
|
WHAT IS 3-M NAVY POLICY MANUAL?
|
OPNAVINST 4790.4D
|
|
|
WHAT IS OPNAVINST 5100.19C
|
NAVOSH
NAVY OCCUPATIONAL SAFETY & HEALTH PROGRAM |
|
|
HOW DO YOU VERFY AN MRC?
|
MRC TO MIP
MIP TO LOEP LOEP TO FR |
|
|
WHAT DOES MRC MEAN?
|
MAINTENANCE REQUIREMENT CARD
|
|
|
WHAT DOES MIP MEAN?
|
MAINTENANE INDEX PAGE
|
|
|
WHAT DOES LOEP MEAN?
|
LIST OF EFFECTIVE PAGES
|
|
|
WHAT DOES FR MEAN?
|
FORCE REVISION
|
|
|
WHAT IS THE DIFFERENCE BETWEEN DANGER & CAUTION TAGS?
|
- USE DANGER TAGS WHEN SAFETY OF PERSONNEL OR EQUIPMET DAMGE IS AT JEOPARDY
- CAUTION TAG ISUSED FR GIVING TEMPORARY SPECIAL INSTRUCTIONS |
|
|
HOW IS THE TAG-OUT PRCESS CARRIED OUT?
|
- WHEN PERFORMING MAINENANCE YOU HAVE AUTHORIZING OFFCER SIGN
- THEN THE PERSON TAGGING OUT THE SYSTE WILL HANG TAG & SIGN AFTER HUNG - AFTER TAGS ARE HUNG, 2ND PERSON GOES BACK & SIGNS TAG DONE SEPERATELY, NOT AT SAME TIME & NOT TOGETHER |
|
|
WHAT IS IEM?
|
INDEX EQUIPMENT MAINTENANCE
|
|
|
WHAT IS IEM STATUS I?
WHAT IS IEM STATUS II? |
LESS THAN 30 DAYS
30 DAYS OR MORE |
|
|
WHAT IS THE 3-M SYSTEM?
|
MANAGEMENT TOOL THAT PROVIDES EFFICIENT & UNIFORM METHODS FOR CONDUCTING & RECORDING PREVENTIVE, ALTERATE & CORRECTIVE MAINTENANCE
|
|
|
WHAT ARE THE 3 TYPES OF MAINTENANCE?
|
PREVENTIVE
ALTERATIVE CORRECTIVE |
|
|
WHAT IS PREVENTIVE MAINTEANCE?
|
ACTIONS INTENDED TO PREVENT O DISCOVER FUNCTIONAL FAILURES
INCLUDES ACTIONS TAKEN TO PREVENT EQUIPMENT FROM FAILING SUCH AS OIL CHANGE, CLEAN FILTERS |
|
|
WHAT IS ALTERATIVE MAINTENANCE?
|
PERFORMANCE OF AUTHORIZED CHANGES OR MODS TO UGRADE OR CHANGE DESIGN OF INSTALLED EQUIPMENT
|
|
|
WHAT IS CORRECTIVE MAINTENANCE?
|
ACTION TAKEN TO FIX EQUIPMENT THAT IF FAILED OR NOT WORKING TO DESIRED PERFORMANCE
|
|
|
WHA DO YOU DO WHEN PMS & TECH MANUALS COLLIDE?
|
THE PPROCEDURES ARE TO BE THE MINIMUM REQUIREDD TO MAINTAIN EQUIPMENTIN AN OPERABLE CONDITION W/ IN SPECS.
PMS SUERSEDES ALL ORGANIZATIONAL LEVELS PLANNED OR PREVENT MAINTENANCE SYSTEM OR PROGRAM WHERE A DIFFERENCEBETWEEN THE REQUIREMENTSS AND/OOR PROCEDURES OF PMS & OTHER TECCH PUBS OR SYSTMS EXISTS, PMS REQUIREMENTS WILL PREVAIL |
|
|
WHO MAINTAINS THE RESPONSIBILITY FOR MULTIPLE WORK CENTERS?
|
GROUP SUPERVISOR
|
|
|
WHAT DOCUMENT IN THE WORK CENTER PMS MANUAL WOULD TELL YOU THE PROPER TOOLS & PROCEDURES TO USE?
|
MRC
|
|
|
WHAT DOCUMENT WOULD DETERMINE WHAT EQUIPMENT NEEDS PMS?
|
LOEP
|
|
|
WHAT PERIODIC UPDATE TO THE WORK CENTER PMS MANUAL IS DISTRIBUTED BY THE 3-MC?
|
FR
|
|
|
WHAT DOCUMENT SHOULD THE SYSCOM MIP # BE COMPARED TO?
|
LOEP
|
|
|
AFTER PULLING THE MRC, YOU SHOULD VERIFY THAT THE #s ON THE MRC MATCH THE NUMBERS LISTED ON WHAT DOCUMENT?
|
MIP
|
|
|
WHAT PERIODICITY CODE IS USED FOR EVERY 2ND DAY?
|
2D
|
|
|
WHAT PERIODICITY CODE IS USED FOR EVERY 5 MONTHS?
|
5M
|
|
|
WHAT PERIODICITY CODE IS USED FOR QUARTERLY?
|
Q
|
|
|
WHAT PERIODICITY CODE IS USED FOR SEMIANNUALLY?
|
S
|
|
|
WHAT PERIODICITY CODE IS USED FOR START-UP?
|
SU
|
|
|
WHAT PERIODICITY CODE IS USED FOR SITUATION REQUIREMENT?
|
R
|
|
|
WHAT PERIODICITY CODE IS USED FOR UNSCHEDULED MAINTENANCE?
|
U
|
|
|
WHAT PERIODICITY CODE IS USED FOR PERIODIC MAINTENANCE?
|
PM
|
|
|
WHAT FORM PROVIDES DETAILED PROCEDURES FOR PERFORMING MAINTENANCE REQUIEMENTS & DESCRIBES THE RESOURCES NEEDED TO ACCOMPLISH A SPECIFIC REQUIREMENTS?
|
MRC
|
|
|
WHAT ARE 2 PARTS OF THE MRC CODE?
|
MIP SERIES
PERIODICITY |
|
|
IF AN MRC IS CLASSIFIED, WHERE WILL YOU FIND THE CLASSIFICAITON PRINTED ON THE CARD?
|
TOP & BOTTOM
|
|
|
WHAT DOCUMENT IS USED ALONG W/ A CONTROLLING MRC WHEN THE MRC APPLIES TO A # OF IDENTICAL ITEMS?
|
LOEP
|
|
|
WHEN PULLING AN MRC FROM THE WORK CENTER PMS MANUAL, WHAT DOCUMENT DO YOU VERIFY IT AGAINST?
|
MIP
|
|
|
WHAT REFERENCE(S) WOULD YOU CONSULT TO DETERMINE DISPOSAL PROCEDURES & GUIDELINES FOR HAZMAT?
|
HMUG
MSDS |
|
|
WHAT SCHEDULE IS THE BACKBONE OF THE PMS?
|
CYCLE
|
|
|
HOW OFTEN IS THE QUARTERLY SCHEDULE UPDATED?
|
ONCE A WEEK
|
|
|
WHAT INFORMATIN SHOULD THE MAINTENANCE RESPONSIBILITY COLUMN OF THE WEEKLY SCHEDULE DISPLAY?
|
NAME, RATE, & RANK OF PERSOAN ASSIGNED THE TASK
|
|
|
HOW IS A FULLY COMPLETED MAINTENANCE TASK ANNOTATED ON THE WEEKLY SCHEDULE?
|
X
|
|
|
EACH WEEKLY SCHEDUL BECOMES A PART OF WHAT LOG?
|
13-WEEK LOG
|
|
|
WHAT TYPES OF ACTIONS PREPARE THE EQUIPMENT FOR PERIOD OF PROLONGED IDLENESS & ARE USUALLY PERFORMED ONLY ONCE?
|
LAY-UP MAINTENANCE
|
|
|
WHAT SATUS IS ASSIGNED TO EQUIPMENT THAT WILL REMAIN ONBOARD, WILL BE INACTIVE FOR 30 DAYS OR LONGER, AND IS NOT SCHEDULED FOR CORRECTIVE MAINTENANCE OR OVERHAUL?
|
STAUS I
|
|
|
WHAT CATEGORY OF MAINTENANCE CONSISTS OF PERFORMING TURN-ON PROCEDURES & RESTORING THE EQUIPMENT TO ITS REDAY-FOR-SERVICE CONDTION?
|
START-UP MAINTENANCE
|
|
|
WHEN A NEW FR IS RECEIVED, WHO IS REPSONIBLE FOR ENSURING THAT THE MIP/MRC IS APPLICABLE TO THE INSTALLED SYSTEM/EQUIPMENT (APL, CORRECT MANUFACTURER, MODEL, ALTERATIN, ETC)
|
WCS
|
|
|
WHO RECEIVES NEW FRs IN AN ORGANIZATION?
|
3-MC
|
|
|
WHAT DOCUMENTS FROM TEH FOLLOWING LIST WOULD BE INCLUDED ON THE FR PACKAGE?
|
MIP TO WORK CENTER FILE
LOEP |
|
|
WHAT ACTIVITY DOES THE WCS PERFORMS WHEN AN FR IS RECEIVED?
|
MAKE SURE THAT THE EQUIPMENT IS IDENTIFIED IS ACTULLAY INSTALLED IN THE WORK CENTER
|
|
|
WHAT ARE THE STEPS IN THE EQUIPMENT VALIDATION STEPS?
|
1. OBTAIN THE EVS FROM WCS & REVIEW THE INFOR FOR FAMILIARITY.
2. FIND THE EQUIPMENT BY USING THE LOCATION ITEM FOUND ON THE EVS. 3. GO TO THE LOCATION LISTED ON THE EVS & ASK FOR DIRECTIONS TO SPECIFIC LOCATION 4. ONCE YOU HAVE FOUND THE EQUIPMENT, FIND THE LABEL PLATE ATTACHED TO THE EQUIPMENT 5. USE THE LABEL PLATE TO VERITY THAT THE FUNCTIONAL DESRIPTION SERILA NUMBER, TYPE/MODEL, & SCAT CODE (IF APPLICABLE) ARE THE SAME AS THE INFORMATION ON THE EVS 6. WHEN THE LABEL PLATE IS VERIFIED, RETURN TO YOUR WCS & VERIFY WHICH WORK CENTER SHOULD BE RESPONSIBLE FOR HTE EQUIPMENT & WHETHER OR NOT THE EQUIPMENT HAS A PARENT EQUIPMENT SERIAL # 7 COLLABORATE W/ WCS IN ORDER TO VERIFY THE APL, ESD & EIC |
|
|
WHEN YOU RETURN TO WCS AFTER CHECKING THE LABEL PLATE, WHAT SHOULD BE VALIDATED NEXT?
|
WORK CENTER
PARENT EQUIPMENT SERIAL # |
|
|
WHEN YOU RETURN TO WCS AFTER CHECKING THE LABEL PLATE, WHAT SHOULD BE VALIDATED NEXT?
|
WORK CENTER
PARENT EQUIPMENT SERIAL # |
|
|
WHA TIS USED TO ENSURE THAT THE EQUIPMENT VALIDATION IS PERFORMD CORRECTLY?
|
EQUIPMENT VALIDATION SHEET (EVS)
|
|
|
WHO NORMALLY OBTAINS THE EQUIPMENT VALIDATION SHEETS FOR THE MAINTENANCE PERSONNEL?
|
WCS
|
|
|
GIVEN THE EQUIPMENT VALIDATION SHEET BY WCS, YOU DISCOVER THAT THE SERIAL # DOES NOT MATCH THE SERIAL # ON THE EQUIPMENT. WHAT SHOULD YOU DO?
|
STOP THE VALIDATION PROCESS, AND RETURN THE SHEET TO YOUR SUPERVISOR
|
|
|
RUDING A ROUTINE MAINTENACE CHECK, YOU CANNOT FIND THE PIECE OF EQUIPMENT ACCORDING TO THE LOCATION ITEM ON THE EVS, WHAT DO YOU DO?
|
GET DIRECTION FROM WCS
|
|
|
AFTER YOU ENSURE THAT THE LABEL PLATE IS CORRECT, WHAT STEP SHOULD BE NEXT?
|
RETURN TO WCS TO VERIFY WHICH WORK CENTER SHOULD BE RESPONSIBLE FOR EQUIPMENT
|
|
|
WHO ENSURES TAHT THE MAINTENANCE PROCESS BEGINS & THAT THE MICROSNAP DATABASE IS UPDATED?
|
WCS
|
|
|
WHAT IS EXPEDITIONAY FORCES' GOAL FOR FINISHING ALL EQUIPMENT VALIDATION?
|
18 MONTHS
|
|
|
WHAT IS CASREP?
|
CASUALTY REPORT?
|
|
|
WHT IS JSN?
|
JOB SEQUENCE NUMBER
|
|
|
WHAT IS FTSC?
|
FLEET TECHNICAL SUPPORT CENTER
PROVIDES LOGITIC SUPPORT GROUP FOR 3-M EXAMPLES - PRODUCTS, REFS, SCHOOLS, DOCS, PMS |
|
|
WHAT IS A 13-WEEK RECORD?
|
AKA 13-WEEK REPORT
MAINTAINED BY WCS RECORD OF A PERSONAL ACCOUNTABILITY OF PMS PERFORMANCE |
|
|
WHAT IS EGC?
|
EQUIPMENT GUIDE LIST
SEMI-ANNUAL ANNUAL QUARTERLY WEEKLY DAILY SPOT CHECKS |
