3A2- Legislation And Codes

Front 1

What is the anagram for The National Board of Boiler and Pressure Vessel Inspectors?

a. CSA.

b. ASME.

c. NBA.

d. NBBI.

e. HSN.

Back 1

d. NBBI.

Front 2

What designates the classification of the certificate of competency, required for the role of chief power engineer?

a. Product classification.

b. Number of employee’s.

c. Type of feedstock used.

d. Kilowatt rating of the power plant.

e. ASME regulations.

Back 2

d. Kilowatt rating of the power plant.

Front 3

What standard regulates Mechanical Refrigeration Code?

a. CSA B52.

b. ASME Section I.

c. CSA B51.

d. ASME Section VII.

e. NFPA.

Back 3

a. CSA B52.

Front 4

What is the upper permissible limit of adjustment without requiring replacing the spring for a safety valve designed for 1700 kPa?

a. 1770 kPa

b. 1785 kPa

c. 2000 kPa

d. 1900 kPa

e. 1751 kPa.

Back 4

b. 1785 kPa

Front 5

What standard regulates Boiler, Pressure Vessel, and Pressure Piping Code?

a. CSA B52.

b. ASME Section I.

c. ASME Section VII.

d. CSA B51.

e. NFPA

Back 5

d. CSA B51.

Front 6

What is the role of the chief power engineer?

a. To inspect the operations.

b. To supervise other power engineers and the safe, and efficient, operation of the plant.

c. To conduct safety training.

d. To make coffee.

e. To operate the panel.

Back 6

b. To supervise other power engineers and the safe, and efficient, operation of the plant.

Front 7

What tables are found in the tables section of the B-51 code?

1. Categories of fittings.

2. Minimum dimensions of blowoff vessels.

3. Minimum dimensions of blowoff vessels for coil-tube boilers.

4. Steam Tables.

5. Refrigeration Tables.

a. 1, 2

b. 1, 3

c. 1, 2, 3

d. 3, 4, 5

e. 4, 5.

Back 7

c. 1, 2, 3

Front 8

Pressure relief and rupture devices are not covered in the B-52 code?

a. True

b. False.

Back 8

b. False.

Front 9

What is the main focus of the National Board of Boiler and Pressure Vessel Inspectors (NBBI)?

a. To supervise the power engineers and the safe, and efficient, operation of the plant.

b. To establish uniform qualifications for inspectors and acceptance of standard code requirements.

c. To regulate safe handling of fired equipment.

d. To state the minimum qualifications necessary to obtain each class of power engineer certification.

e. To regulate fire safety in the plant.

Back 9

b. To establish uniform qualifications for inspectors and acceptance of standard code requirements.

Front 10

The pressure vessels section of the B-51 code identifies pressure vessels and their installation, including pressure vessel inspection openings. This section also shows the design of cushion tanks, blowoff vessels, and the installation of:

a. Air receivers.

b. Boiler drums.

c. Dearators.

d. Blowdown tanks.

e. Fuel tanks.

Back 10

a. Air receivers.

Front 11

What are the two main purposes of the CSA B-52 code?

1. Terms and equipment relating to refrigeration and airconditioning equipment are defined.

2. The various classifications of buildings and occupancies arelisted and described with examples of each classificationgiven.

3. To provide for the safe design, construction, installation,operation and repair of refrigerating and air conditioningequipment and systems, and related equipment.

4. To promote uniform requirements among the provinces andterritories.

a. 1, 2

b. 1, 3

c. 2, 4

d. 3, 4

e. 1, 4.

Back 11

d. 3, 4

Front 12

What code regulates Chemical Plant and Petroleum Refinery Piping?

a. CSA B52.

b. ASME Section I.

c. CSA B51.

d. ASME Section VII.

e. ASME B31.3.

Back 12

e. ASME B31.3.

Front 13

What code regulates Recommended Guidelines For The Care ofPower Boilers?

a. CSA B52.

b. ASME Section I.

c. CSA B51.

d. ASME Section VII.

e. NFPA.

Back 13

d. ASME Section VII.

Front 14

The repairs and alterations section of the B-51 outlines thestandards that must be followed when replacing existing pieces ofpressure equipment with new pieces of pressure equipment.

a. True

b. False.

Back 14

b. False.

Front 15

What is the focus of the Engineers regulations?

a. To state the minimum qualifications necessary to obtain eachclass of power engineer certification.

b. To control process operations.

c. To decide who will be chief engineer.

d. To regulate safe handling of fired equipment.

e. To Limit the number of engineers.

Back 15

a. To state the minimum qualifications necessary to obtain each class of power engineer certification.

Front 16

Qualified and authorized boiler and pressure vessel manufacturersneed not be registered with the:

a. National Board.

b. National Fire Protection Association.

c. American Society of Mechanical Engineers.d. Canadian Standards Association.

e. National Parole Board.

Back 16

e. National Parole Board.

Front 17

The minimum size of a circular manhole opening shall be:

a. 410 mm

b. 250 mm

c. 406 mm

d. 89 mm

e. 359 mm.

Back 17

c. 406 mm

Front 18

Ammonia may be identified by using:

a. R-40

b. R-717

c. R-764

d. R-114

e. R-611.

Back 18

b. R-717 z

Front 19

A group “B3” refrigerant is:

a. Sulphur dioxide

b. Most toxic of the three groups

c. Least flammable of the three groups of refrigerant

d. Carbon dioxide

e. Ammonia.

Back 19

b. Most toxic of the three groups

Front 20

What standard regulates Boiler, Pressure Vessel, and PressurePiping Code?

a. CSA B52.

b. ASME Section I.

c. ASME Section VII.

d. CSA B51.

e. NFPA.

Back 20

e. NFPA.

Front 21

The letters C.R.N. stand for:

a. Cancelled registration number

b. Canadian repair number

c. Certified repair number

d. Canadian registration number

e. Centralized registration numbers.

Back 21

d. Canadian registration number

Front 22

The prefix letters “wp” shall be used to designate:

a. Working pressure

b. Welding procedure

c. Water pressure

d. Work permit

e. Welding permitted.

Back 22

b. Welding procedure

Front 23

One square metre of heating surface is equal to:

a. 1 kilowatt

b. 10 kilowatts

c. 100 kilowatts

d. 1000 kilowatts

e. 5000 kilowatts.

Back 23

b. 10 kilowatts

Front 24

What code regulates Rules For Construction of Power Boilers?

a. CSA B52.

b. ASME Section I.

c. CSA B51.

d. ASME Section VIII.

e. NFPA.

Back 24

b. ASME Section I.

Front 25

The minimum design low side pressure for a system using R-14refrigerant for commercial machinery rooms is:

a. 3766 kPa

b. 4800 kPa

c. 1586 kPa

d. 3690 kPa

e. 597 kPa.

Back 25

d. 3690 kPa

Front 26

The emergency discharge line shall be connected directly to the topof:

a. The receiver

b. The condenser

c. The evaporator

d. The compressor

e. Any of the above.

Back 26

a. The receiver

Front 27

The maximum pressure at which a safety valve may be set isdetermined by the:

a. Boilers Act

b. Operating pressure

c. Suggested Rules for Care of Power Boilers

d. Maximum allowable working pressure of boilers

e. Manufacturer’s operation manual.

Back 27

d. Maximum allowable working pressure of boilers

Front 28

Brine means any liquid that is used without a change in its state forthe transmission of heat and has either no flash point or one above:

a. 75.5°C

b. 40.5°C

c. 65.5°C

d. 50.5°C

e. 90.5°C.

Back 28

c. 65.5°C

Front 29

A Third Class Engineers Certificate of Competency qualifies theholder to take charge as Chief Engineer of a power plant notexceeding:

a. 3000 kW

b. 2000 kW

c. 10,000 kW

d. 5000 kW

e. 50,000 kW.

Back 29

d. 5000 kW