2019 Swe Pg 110

Front 1

Who serves as the primary technical advisory source in the maintenance activity?

Back 1

QA

1-1

Front 2

QA inspectors shall be selected and designated in writing by whom?

Back 2

EO

1-1

Front 3

When may a collateral QA sign off grounding/flight control work?

Back 3

When approved by a supervisor with maintenance release authority.

1-1

Front 4

Who is responsible for ensuring support equipment meets calibration and safety requirements?

Back 4

QA

1-2

Front 5

Who provides funds directly to DOD for USCG participation in JOAP?

Back 5

CG-41

1-3

Front 6

Who performs MH-65 Engine JOAP testing?

Back 6

Turbomeca approved labs

1-4

Front 7

What does RCM mean?

Back 7

Reliability-Centered Maintenance

1-4

Front 8

How can Free Water be introduced in fuel tanks?

Back 8

Condensation and separation of water in solution

1-4

Front 9

FSII additives, eye protection, is required, wear Chemical Goggles, Impervious Gloves and___?

Back 9

Chemical Apron

1-5

Front 10

Normal Level of FSII?

Back 10

0.07-0.15%

1-5

Front 11

FSII lowers JP-5 Flash Point by ___ Degrees.

Back 11

4* F

Front 12

Use of Dehumidification carts for at least 8 hrs a day has been shown to reduce avionics failure rates by ___%

Back 12

40%

1-6

Front 13

Who oversees Tempest Program?

Back 13

CG-41

1-6

Front 14

What is required after modification of COMSEC aircraft wiring? (rerouting included)

Back 14

TEMPEST Certification

1-7

Front 15

Maintenance instructions shall be prepared by ___ and signed by ____.

Back 15

QA, EO

1-8

Front 16

After a maintenance instruction has served its purpose it shall be canceled and filed for ___ Months after completion date.

Back 16

6 Months

1-8

Front 17

What is used as the cover sheet for Message TCTOs recieved by the unit?

Back 17

Maintenance Instruction

1-8

Front 18

What is the purpose of the tool control program?

Back 18

Ensure safety of Aviation personnel through prevention of mishaps and FOD to AC systems caused by misplaced tools.

1-9

Front 19

Aviation tools will be of such quality that they meet or exceed which standards?

Back 19

SAE Aerospace

1-8

Front 20

Replacement tools shall conform to the same ____ and ____ as original tools to ensure integrity of foam cutouts or other tool displacement methods.

Back 20

Shape and Size

1-9

Front 21

Which type of resins are not authorized for use on any Coast Guard Aircraft?

Back 21

Polyester

1-9

Front 22

If a unit does not have a CSE program and needs to enter a fuel tank, who can be used to fill the role?

Back 22

Certified Marine Chemist

Industrial Hygenist

Certified Gas Free Engineer

1-10

Front 23

What course is required for CSE?

Back 23

Confined Space for Shore Falciites at RTC Yorktown

Or

Confned space safety at Norfolk Naval Base

1-11

Front 24

The CSE is designated in writing by whom?

Back 24

CO

1-11

Front 25

How long are AVGFE records maintained?

Back 25

3 years

1-11

Front 26

How long is the CSE certification valid?

Back 26

1 year

1-11

Front 27

Parts Classified as CSI/FSCAP (Critical safety tiems/Flight Safety Critical Aircraft Parts) by ALC or other Govt Agency shall be identified with a ____ Following either the acquisition method suffix code or FltCrit blocks in AMMIS?

Back 27

C

1-12

Front 28

What is used to request a change to the ACL?

Back 28

CG-22

1-13

Front 29

Who may authorize one time purchase of chemicals not on ACLto meet operational commitments?

Back 29

EO

1-14

Front 30

Equipment that produces cuttings/flying particles should be set at __ angles to each other and secured to floors, bases or stands.

Back 30

15*

1-15

Front 31

In addition to scheduled shop safety inspections conducted by designated safety representatives, ________ Shall periodically inspect all shop equipment or machinery.

Back 31

Shop Supervisors

1-15

Front 32

On Shop Grinders, Metal hood type guards shall enclose ____ of the abrasive wheel?

Back 32

Two thirds

2-1

Front 33

Tool Rests shall be adjusted to provide a minimum of ____ from abrasive grinding surfaces?

Back 33

1/8inch

2-1

Front 34

Battery shop location must be approved by who?

Back 34

Installation Ground Safety Officer,

Fire inspector Chief,

Medical Officer

2-2

Front 35

How many feet of clearance is required when charging Slab and Sealed NICAD batteries in the same room?

Back 35

5 Feet

2-2

Front 36

What must not be worn while working with Batteries?

Back 36

Rings

2-3

Front 37

Under No Circumstances should a ________ Be used for cleaning batteries/ Battery shop?

Back 37

Wire Brush

2-3

Front 38

To Mix electrolyte with water, always pour _____ into the ____.

Back 38

Electrolyte into the water

2-3

Front 39

How often is insulation on tools locally insulated with Heat shrink (used in battery shop) inspected?

Back 39

Daily

2-4

Front 40

During Charging Vented NICAD batteries, if battery heats and reaches ____ it may be necessary to add water to cells or discontinue charging until battery cools.

Back 40

115*

2-4

Front 41

Composite material prevcaution: Single fiber particles with a diameter of ____-____ microns and length less than 0.1mm pose the greatest threat to the respiratory system.

Back 41

3-4 microns

2-14

Front 42

Pregnant Personnel shall not work with ____?

Back 42

Composites

2-14

Front 43

The purchase of what type of fire extinguishers for flight line, hangar and shop use is prohibited?

Back 43

Halon

2-14

Front 44

Combustible material must not be stored or allowed to accumulate within ___ft of any stove, furnace or boiler.

Back 44

10 Feet

2-15

Front 45

Oxidizing chemicals shall be protected and stored separately from ____.

Back 45

Combustible materials

2-15

Front 46

Flight line certified Static Grounds max resistance?

Back 46

10,000 ohms

2-16

Front 47

Hangar deck certified power grounds max resistance?

Back 47

25 ohms

2-16

Front 48

Static Grounds should be tested every __ Months.

Back 48

24

2-16

Front 49

Certified Static and power grounds will be marked with 1-inch letters with ___ tested and ____.

Back 49

Date tested and Test results

2-16

Front 50

Jacking Outside: Wind velocity not to exceed ______.

Back 50

15 MPH

2-18

Front 51

What shall be used to avoid overinflation of tires?

Back 51

Pressure regulator

2-18

Front 52

O2 cylinders must not be stored with acetalyne or other combustible gas cylinders in an _____ space.

Back 52

Unventilated

2-19

Front 53

Do not deplete an O2 bottle below what PSI?

Back 53

50 PSI

2-19

Front 54

How Many personnel are required to service aircraft with gaseous O2?

Back 54

02 personnel

2-20

Front 55

O2 servicing control valve shall not be opened mroe than ____ so that it can be shut off quickly in an emergency.

Back 55

3/4 turn

2-20

Front 56

If LOX spills on concrete expansion joint sealant or asphalt stop servicing or other operations within a ___ ft radius?

Back 56

20 ft

2-20

Front 57

Do not walk or roll equipment over LOX spill area for at least ____ Mins or until all frost/fog appearance has disappeared.

Back 57

30 Mins

2-20

Front 58

Ensure a 125/150 wheeled PKP fire extinguisher or equivalent is within ____ft.

Back 58

50 ft

2-20

Front 59

What color and type of coveralls are required for LOX servicing?

Back 59

White Cotton

2-20

Front 60

What is done with residual LOX in drip pan?

Back 60

It's allowed to boil off, not poured off.

2-21

Front 61

What is used to thaw a LOX control valve clogged with ice?

Back 61

Water

2-21

Front 62

LOX Servicing: A steady drip from the servicing nozzl valve connection that can be contained in a drip pan is ____.

Back 62

Acceptable

2-21

Front 63

Present LOX servicing connections cannot be made absolutely ______ due to basic design deficiencies.

Back 63

Leak Tight

2-21

Front 64

Allow the LOX system to stabilize for __ minutes after servicing prior to use, buildup or reading gauges.

Back 64

30 Mins

2-21

Front 65

When Pressure refueling, Dipping fuel tanks shall be avoided for at least ___ Mins after completion of fueling.

Back 65

3 Mins

2-22

Front 66

Electric Cargo truck shall not be operated within ___ ft of fueling operations.

Back 66

50 ft

2-24

Front 67

External Power: If the 28 VDC feedback signal (interlock) is lost the disconnect shall open within __ seconds.

Back 67

2 seconds

2-24

Front 68

External power: The Interlock sircuit shall not draw more than ___ miliamperes from the 28 VDC circuit.

Back 68

20 Miliamperes

2-24

Front 69

Minimum People required to tow Aircraft.

C130, 65, 60, 144

Back 69

C130- 7

65- 4

60- 4

144- 6

2-25

Front 70

How mane personnel required in cockpit for C-130 engine run?

Back 70

2

2-27

Front 71

Who may authorize taxiing without signal men providing the ramp has clearly defined taxi lines and parking spots?

Back 71

CO

2-27

Front 72

When an aircraft is being taxied within 25 ft of an obstruction, a minimum of ____ for each wingtip is required.

Back 72

One wing walker

2-28

Front 73

Aircraft must not be taxied within ___ft of obstructions.

Back 73

5 ft

2-28

Front 74

Hot refueling Ops are not allowed within ___ ft of any building unless waiver from Commandant CG-41

Back 74

100 ft

2-28

Front 75

Storing equipment outside of existing structures within ___ ft of hot refueling area is prohibited.

Back 75

200 ft

2-28

Front 76

All Changes, supplements and Rapid Action Changes shall be incorporated into the applicable manual within ___ working days.

Back 76

5 working days.

3-2

Front 77

April Pubs audit conducted by _____ and ____. October Audit conducted by ____.

Back 77

April--QA and Shops

Oct- Shops

3-2

Front 78

RAC (rapid action change)

Back 78

Distributed by expedited means

Normally involve possible safety of flight or faulty equipment items.

3-3

Front 79

Interim Rapid Action Change (IRAC)

Back 79

Normally Distrubited in message format.

Will require immediate action

3-3

Front 80

TOPS Page (technical order Page supplement

Back 80

"Green page" Supplements rather than replaces

Filed in the TO facing the affected page

3-11

Front 81

A _____ Will supersede all active TOPS.

Back 81

Revision

3-12

Front 82

A ____ is a complete new edition of an existing TO.

Back 82

Revision

3-12

Front 83

Normally a TO is revised when the pages affected by cvhanges/requiring change total ____ % or more of the TO.

Back 83

50%

3-12

Front 84

When is a TO Recinded?

Back 84

Whennthe info it contains is no longer required or incorporated in other pubs.

3-12

Front 85

Publication contents are organized on what 3 levels?

Back 85

System - Subsystem - Sub-Subsyste,

Or

System - Chapter - Subject

3-16

Front 86

Who conducts monthly asset logbook reviews?

Back 86

EO or designated representative.

4-1

Front 87

What formis Aerospace Vehicle Delivery report?

Back 87

CG form 290

4-1

Front 88

What is form AFTO 781J?

Back 88

Airframe and engine operating time and cycle information.

4-2

Front 89

What is weight and Balance form number?

Back 89

CGTO 1-1B-50

4-2

Front 90

All dates on forms will be recorded in what format?

Back 90

MM/DD/YY

4-2

Front 91

What 3 events must occut to obtain one engine cycle?

Back 91

Engine start,

Power lever advanced to 80%,

engine shutdown

4-2

Front 92

At a minimum units shall print a new MDL how often?

Back 92

Once a month

4-3

Front 93

New MDLs should project all scheduled maintenance for a period of how long?

Back 93

2 months

4-3

Front 94

On MPCs, Detailed explanations are required for which removal categories?

Back 94

Trouble or Other

4-4

Front 95

What form is used to recommend changes to flight and standardization manuals?

Back 95

AF 847

4-5

Front 96

PQDR Form Numer?

Back 96

SF 368

4-12

Front 97

Serviceable tag number?

Back 97

DD 1574 (orange tag)

4-13

Front 98

Unservicable tag number?

Back 98

DD 1577-2 (green)

4-13

Front 99

PQDR Tag number?

Back 99

CG 1577-B

4-7

Front 100

On DD 1574 Tag, what should be written in remarks section?

Back 100

Aircraft type if used on one aircraft or MULTI if used on multiple AC types.

4-7

Front 101

What tag is used for unservicable parts that are nonreparable at ALC and must be sent out for repair?

Back 101

DD 1577-2 Blue

4-15

Front 102

DD 1577

Back 102

Unservicable (red) condemned, irreparable.

In condition code write S

4-15

Front 103

What is submitted anytime a part or component fails to meet its warranty or mean time schedule?

Back 103

PQDR

4-16

Front 104

What will be submitted anytime a part is recieved with amage from shipping so that transportation and packaging can be reviewed?

Back 104

PQDR

4-16

Front 105

What is submitted when FSCAP (flight safety critical aircraft parts) that fail beyond their mean time schedule and have an adverse affect on safe outcome of flight or impact ability to complete mission.

Back 105

PQDR

4-16

Front 106

When an item is recieved with damaged packaging or shipping container, it may require a ____ in addition to PQDR.

Back 106

Transportation Discrepancy report (TDR) SF 361

4-18

Front 107

Upon receiving aircraft from PDM, units are to inspect for PDM discrepancies. Units are encouraged to provide recommendations on how to correct/prevent discreps within

___ calendar days, ___ shorties ___ flight hours.

Back 107

14 Days, 10 Sorties, 30 Hours

4-19

Front 108

NMCM time does not include periods when the aircraft is down for _______.

Back 108

Depot Level Maintenance

4-20

Front 109

MLHs reported on ACMS MPCs and EAL account for approximately ___% of total MLHs expended.

Back 109

85%

4-22

Front 110

What is the Availability Index (AI) ?

Back 110

Percentage of time that aircraft at CG air stations are available to perform missions.

4-23

Front 111

What is Parts Availability Index (PAI)?

Back 111

Indicates how often air stations have the aircraft parts they need when they need them

4-17

Front 112

How Often shall AS perform review of Almis users assigned groups and roles report?

Back 112

Yearly

5-1

Front 113

For Paper and EAL forms: What format is used for dates?

Back 113

MM/DD/YYYY

5-2

Front 114

What is the only authorized ink color for Paper Forms?

Back 114

Black

5-2

Front 115

Colored Text in EAL

Back 115

Blue - Special Inspections

Green - Logbook reviews

Red - Functional Check requirements and aircrew warnings

5-2

Front 116

How long are paper forms retained after entry into EAL?

Back 116

90 days

5-2

Front 117

MLH recorded on cannibalization removal record shall include only ____.

Back 117

Time required to remove components and secure the area.

5-4

Front 118

When corrective action is delayed ___hrs one of the deferred maintenance action codes must be applied to the discrep.

Back 118

24 Hrs

5-4

Front 119

Where is deferred maintenance code entered on paper records?

Back 119

In the + Box that immediately precedes corrective action block.

5-4

Front 120

All deferred maintenance actions shall be authorized by the EO or representative prior to ________.

Back 120

Release of asset for flight

5-4

Front 121

CFD deferrals must also be preauthorized by ________.

Back 121

AC Product Line

5-4

Front 122

Discreps on the Mission generated maintenance record (pink sheet) should not remain referred for longer than _____ day(s)

Back 122

7 Days

5-5

Front 123

CFs must not require a ________.

Back 123

Requisitioned part

5-5

Front 124

PP discreps must have a non flight essential part requisitioned and a requisition number must be provided within ______ hrs.

Back 124

72 Hrs

5-5

Front 125

PP Discreps shall or shall not be updated to CFs upon receipt of part.

Back 125

Shall NOT

5-5

Front 126

With exception to deployed assets, no deferred discreps shall remain open for longer than ___ days without EO or Rep. Approval.

Back 126

30 days

5-6

Front 127

What does Section 1 of paper logbook contain?

Back 127

Deferred maintenance record (located on inside of binder cover)

All maintenance records

Preflight and servicing records

Mission records

5-8

Front 128

What does Section 3 of paper logbook contain?

Back 128

Fueling/Defueling records

Fuel Samples records

5-8

Front 129

What does Section 2 of Paper Logbook contain?

Back 129

Mission Schedule

Asset status

5-8

Front 130

What does Section 4 of paper logbook contain?

Back 130

Maintenance discrepancy report.

5-8

Front 131

Paper logs page colors

Back 131

Preflight and servicing record: Yellow

Mission record: Blue

Mission generated maint. Record: Pink

Flight Safety maint. Doc.: Pink

5-8

Front 132

How often will units conduct paper logbook training?

Back 132

Yearly

5-8

Front 133

Who receives additional yearly paper logbook training?

Back 133

Mission and Maintenance record recorders

5-8

Front 134

All paper logbook will be used for periods of non connectivity exceeding ____ hrs.

Back 134

4 hrs.

5-8

Front 135

Where is the deferred maintenance record located? (paper logs)

Back 135

On the inside of the paper logbook binder so that it's the first document seen when opened.

5-9

Front 136

Paper Logs: What are the 3 sections of the deferred maintenance record.

Back 136

CFs/PPs

Cannibalization record

Special inspections

5-9

Front 137

Paper Logs: Which document informs the flight crew of maintenance that could affect flight characteristics?

Back 137

Flight Safety Maintenance Document

5-9

Front 138

Materiel type 1

Back 138

Aeronautical materiel under individual managment by ALC

AC Engines

High value components

Items in critical supply

6-2

Front 139

Materiel type 2

Back 139

$250 or more

Commercial source of supply

Flight critical

Reparable

6-2

Front 140

Materiel Type 3

Back 140

Consumable materiel less avionics

Less than $250

OGA source (other Govt. Agency)

Paid for with AFC 30

6-2

Front 141

Materiel Type 4

Back 141

$800 or more

Commercial Source

Flight critical

Reparable

6-2

Front 142

Materiel Type 5

Back 142

Comsumable Avionics Materiel

Less than $800

OGA Source (Other Govt Agency)

Paid for by AFC30

6-2

Front 143

Materiel Type 6

Back 143

Aeronautical support equipment

6-2

Front 144

Materiel Type 7

Back 144

Materiel used to support Turbomeca Engine

6-3

Front 145

ALC will retain 4491s for ___ fiscal years following the current one.

Back 145

3 fiscal years

6-6

Front 146

Priority __ orders from ALC are shipped immediately as long as the parts are in stock.

Back 146

Priority 2

6-6

Front 147

ALC Shipping: Priority 5 and 12 orders are evaluated ___ per day for shipment.

Back 147

once

6-6

Front 148

ALC shipping: Priority 12 requisitions are filled if there are more than ___ parts on the ALC shelf.

Back 148

5 parts

6-6

Front 149

ALC Shipping: Priority 5 requisitions are filled if there are more than __ parts on the ALC shelf.

Back 149

Two parts

6-6

Front 150

The Prompt Payment Act requires ALC Pays invoices for parts within ___ days.

Back 150

30 days

6-6

Front 151

Any part recieved from ALC with questionable background or suspect condition will be brought to the attention of ___ and he will determine if it's serviceable or unservicable.

Back 151

EO

6-6

Front 152

TCTO Change kits requiring more than 4 labor hours will not normally be issued within ____ months/days of PDM

Back 152

4 months

6-7

Front 153

TCTO Kits that require less than 4 labor hours will not be issued within ___ days of PDM.

Back 153

45 days

6-7

Front 154

Do not use ____ for attaching tags to equipment.

Back 154

Wire

6-7

Front 155

Type 1 Materiel shall be shipped to ALC or other Repair facility within ____ days of removal.

Back 155

15 days

6-4

Front 156

A spare parts allowance is recommended based on ___ years of demand history.

Back 156

4 years

6-11

Front 157

Coast Guard air stations and aviation units will only use _______ primer.

Back 157

Non-hexacalent Chromium Primer

1-13