• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/30

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

30 Cards in this Set

  • Front
  • Back
Tension, compression, bending, and twisting are kinds of mechanical:
Force
A series circuit containing one 6-volt battery and two identical lamps would produce a voltmeter reading of:
3 volts per lamp
To measure the strength of a battery, set the multimeter function to:
DC volts
Which of the following does not refer or pertain to batteries?
AC
The most common source of DC voltage is:
A battery
A term that pertains to DC voltage is:
Anode
A 20 lb. force is applied to the end of a 1.5 ft wrench produces a torque of:
30lb*ft
A quantity that is fully specified by measuring its size is called a:
Scalar
Bill and Mary push a cart with a force of 6lb and 9lb respectively, in the same direction. The magnitude of the resultant is:
15 lbs
A resultant force has both magnitude and:
Direction
If a leak in a faucet causes a water loss of 120 gallons in two days, what is the volume flow rate per hour?
2.5 gal/hour
If a leak in a water line causes the loss of 144 gallons in 2 days, what is the volume-flow rate of the leak?
3.0 gal/hour
Fluid flow rate units as "kg per min" or "gm per sec" are units of:
Volume-flow
A rate associated with a fluid system is:
Volume
Which of the following is associated with a rotational rate?
The shaft on an electric drill
A negative sign in front on an acceleration would indicate the object is:
Decelerating
Which of the following is associated with linear rate?
Buckshot fired from a gun
A vector must have:
Magnitude and direction
Angular rate is expressed in which terms?
Radians per second
The term RPM refers to:
Revolutions per minute
For an object moving through a fluid, streamlining is a way to reduce:
Drag force
Which of the following is most streamlined?
Teardrop
Rolling friction is a type of:
Kinetic friction
What is a gas or liquid that conforms to the shape of its container?
Fluid
An SI unit of pressure is:
N/M2
Mass is equal to:
Density times volume
Density is equal to:
Mass divided by volume
Two hundred Newtons of force are required to lift a mass 1.2 meters above the floor. How many Newton meters of work is done?
240
A vertical force raises a 200lb Barbell 5ft. The amount of work done is:
1000 ft*lbs
Work done by a torque is equal to the torque applied times the:
Radius