• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/15

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

15 Cards in this Set

  • Front
  • Back
If no IAF is published what is required to ensure you are properly aligned with the final approach course?
Radar
(272)
How do you fly DR courses?
use lead points, wind correct, fly groundtrack as close as possible
(273)
What are the two types of course reversals?
1. Procedure Turn
2. HILOPT
(274)
Do not execute a procedure turn or HILOPT if?
SNERT
-cleared for a St-in
-flying the appr via a No-PT routing
-Established in holding, subsequently cleared the appr, and the holding course and procedure turn course are the same
-ATC provides Radar vectors to final
-ATC clears you for a Timed appr (when you are established in a holding pattern and given a time to depart teh FAF inbound)
(275)
How is a procedure turn depicted? what are the PT techniques?
barb; holding, 45/180, 80/260
(277-8)
Max teardrop for the Holding tech? Can you use leadpoints? what if entry turn places you on non-manuevering side?
30 degrees
hdg w/in 90 deg use normal ld pts
on non-manuevering side >180kias, correct back to outbound course with at least 20 intercept
(278)
If you intercept the procedure turn course outbound on the holding tech.....
maintain the course for the remainder of the outbound leg then turn toward the manuevering side to reverse the course
(279)
when do you start timing/descend on holding tech?
time/descend outbound/abeam. If you can't determine abeam, start timing after completing the turn outbound
(280)
When can you descend on 45/180 or 80/260?
Outbound, abeam, and on a parallel or intercept hdg to outbound track
(281)
on a 45/180 how long do you time outbound before begining procedure turn?
CAT A/B: 1 min
CAT C/D/E: 1 min 15 secs
(281)
Established in a holding pattern and then cleared for an approach when do you proceed inbound?
complete the current holding pattern and commence the approach. If you need an additional turn to complete a descent, request with ATC
(284)
How do you enter a procedure track?
Just turn in the shorter direction to intercept the inbound course. If there is a holding pattern published at the IAF you are not cleared to use the holding pattern to align yourself - you must request that with ATC if neccesary
(286)
When can you descend on a procedure track?
when outbound, abeam the IAF on a parallel or intercept hdg to the procedure track course
(286)
If an altitude restriction is depicted at the intersection of a radial/arc, the restriction must be complied with NLT....
the completion of the lead turn associated with the fix
(287)
What is a TAA
Terminal Arrival Area. Replaces MSA for an RNAV approach with "T" design
(288)