Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
19 Cards in this Set
- Front
- Back
|
SINCGARS |
Single Channel Ground and Airborne Radio System |
|
|
Single channel |
Single channel mode allows the receiver transmitter to communicate on one frequency(selected on the keyboard) |
|
|
Frequency Hopping |
SINCGARS can secure transmissions by using a transmission security key and FH to eliminate the threat of jamming or direction finding equipment. Cold start TSK SC Frequency loaded into MAN Hopset Lockout set FH Sync time |
|
|
LO |
Manpack/vehicular: 200M-400M |
|
|
M |
400M-5KM |
|
|
HI |
5KM-10KM |
|
|
PA |
Power amplifier 10KM-40KM |
|
|
Assemble Manpack |
Install battery Note battery life FCTN to LD BATT to CLR Enter battery life Press STO FCTN to SQ ON |
|
|
Antenna |
Hand tighten antenna base with RT ANT connector |
|
|
Handset |
Connect to AUD/DATA connector, twist RIGHT |
|
|
Field pack |
Place RT into pack with antenna to the left |
|
|
Dismount RT |
Dismount upper RT Remove retaining bar Loosen clamps Set all options to off Disconnect cables from RT AUDIFILL, AUDIDATA, and RXMT Disconnect RT ANT connector Set RT to FCTN to sTsV Set CB1 to off Remove RT |
|
|
Antenna tie down methods |
Stay down clamp Stay down clip Snap free clamp Snap free clip |
|
|
Loading SC Frequencies |
Obtain frequency from unit Set FCTN to LD Set MODE to SC Set CHAN to MAN or where you want to store the freq Press CLR Enter 5 digit frequency, you have 7 seconds Press STO Set FCTN to SQ ON |
|
|
Battery Non chargeable hold up battery |
BA 5372 |
|
|
Battery Non rechargeable Lithium MP, primary power battery |
BA 5590 |
|
|
Battery rechargeable MP Secondary power |
BA590 |
|
|
Operator level maintenance on radios |
Inspect equipment: SL3 completion Clean the equipment Perform operations checks |
|
|
What is FITCAL |
Feel Inspect Tighten Clean Adjust Lubricate Report discrepancies |
