• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/12

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

12 Cards in this Set

  • Front
  • Back

A hydrant is..

Equipment fixed to water main to access water

Is water from hydrant same as domestic tap

Yes

How does water arrive at hydrant

Reservoir


Treatment plant


Pump station


Trunk mains


Service mains

Local water authorities do what to hydrants


Name the act and authority responsible for adequate water supply

Install and maintain


2004 fire and rescue services act - the London fire planning authority (LFEPA) and emergency

What is the British standard that hydrants must conform to..

65mm round thread outlet to enable stand pipe to be attached


Min water flow of 2000 ltrs per min to min pressure of 1.7 bar


Anti clockwise opening

Hydrant Notes

Hydrants are SCREW DOWN


HYDRANT PLATES are placed on walls gates sides of buildings - purpose is to give directions and indicate size of water is attached to (note double and nearest rd)


Hydrant plates - top of H is mm size of main


FROST VALVES prevent freezing

Connecting standpipe to outlet and flushing the hydrant is called

Setting in the hydrant or shipping the hydrant

Name to leak detection devices in hydrants

Magnetic - magnetically attached to hydrant


Screw on - 65mm screw cap connected to electronic recording unit. May contain LED

Visual inspections are done


Hydrants are tested

Yearly - identify condition and allow staff to remain familiar with location


Every 4 years between April and September

Hydrant gear is made up of?

Stand pipe


Hydrant Key


Hydrant bar

What do you do if you find a..


Magentic leak device and


Screw on

Remove then replaced back into hydrant when shut down


Screw on - Shut valve unscrew remove. Then left in pit and water officer informed on return to station

WATER ON, what are the next commands?

DELIVERY NUMBER


BRANCH WORKING ON WHAT FLOOR


6 BAR PRESSURE