Lab Analysis Of Freezing Point Depression

Decent Essays
Purpose: The objective of this experiment is to use a technique called freezing point depression, which aid to figure out the molar mass of an uncertain compound.
Introduction:
Many scientists who do researches and experiments often use chemical solutions. Moreover, the solutions can be either homogeneous or heterogeneous mixtures. The word homo means evenness as a result the solution has an identical form as well in composition. A mixtures are combination between more than two substances (Burdge, 2013) . In this lab, students will be working with chemical solutions. Furthermore, the substance which has the smallest amount, or disperses is called the solute (Ophardt, 2003). On the other hand, the matter in the large quantity in the
…show more content…
As temperature increases molarity decreases and vice versa. Oppositely, molality doesn’t deal with volume only the amount of solute which is in moles divided by the mass of the solvent in kilograms (Graves, 2013). As student, have learned throughout the years there are two physical properties intensive and extensive, but there is another one and is called colligative properties (Bodner Group, n.d.) Colligative properties can be applied specifically to solutions since the colligative properties is influence by the amount of particles of the solvent and solute that is in the solution (Bodner Group, n.d.). Colligative properties help scientist understand one important concept which is freezing point depression (Graves, 2013). The freezing point is the change that takes place when the temperature at which a solid liquefies or freezing when a solute is dissolved in it. For example, antifreeze used in cars is a solution that can lower the freezing point of H2O which is the solvent and as a result it prevents H2O from freezing (Francis, 2006).In addition, Student can as well know the how much the freezing point of the solvent was decreased by using a formula which is "∆" Tf = (m)( Kf) (Graves, 2013) . By using this formula it gives an insight of how the freezing point is affected and by how much. New advances in technology and formulas helps not only scientist but as well student that are learning about freezing point

Related Documents

  • Improved Essays

    Alka Seltzer Experiment

    • 1056 Words
    • 5 Pages

    It was identified as more alka seltzer is broken it is dissolved faster. The experiment was to put alka seltzers that is broken into ½, ¼ and unbroken ones into 125ml, 21 degrees Celsius (room temperature) water. The trend occurred because the decrease of the size of the particles which increase the rate of reaction because the surface area of reactant (alka seltzer) has been increased. A larger surface area has increasing target of colliding with the molecules, the bigger the target is, it is easier to hit the water molecules. This is why the more alka seltzer is broken, it dissolved the…

    • 1056 Words
    • 5 Pages
    Improved Essays
  • Improved Essays

    Magnesium Chloride Lab

    • 1562 Words
    • 7 Pages

    22.5 27 385 629.78 -119.95 2 20 .75 23.5 30.9 642.45 1043.39 -132.36 3 20 1 22.6 34.9 1079.69 1747.14 -166.394 4 20 1.5 23 39.1 1448.29 2320.59 -147.5 Table 2: Average enthalpy of dissolution -141.25 KJ/mol Trial Hot H2O (mL) Cold H2O (mL) Tihot/ Ticold (celsius) Tf (celsius) q (J) 1 50 50 Table 3 Table 2 and 3: ∆T, the amount of H2O, and amount of MgCl2 used was recorded.…

    • 1562 Words
    • 7 Pages
    Improved Essays
  • Improved Essays

    A Hydrate’s Empirical Formula Aaron Meehan Ethan 11/06/17 Kotiba 09J I have read and agree to the terms of the Academic Honesty Statement. _ Aaron Meehan____________11/06/2017 _____________________ Student Signature…

    • 1196 Words
    • 5 Pages
    Improved Essays
  • Improved Essays

    Percent Copper In Brass Lab Conclusion Emily Oleisky The purpose of this lab was to observe the amount of light a solution absorbs, and use the relationships in the Beer-Lambert Law to determine the quantity of a certain compound within a complex sample. First, the relationships between wavelength, concentration, and absorbance were determined. This lab focused on identifying the absorption of copper in various brass samples, and finding the percent copper in brass. In the first activity of the lab, the scientist was trying to determine the difference in molar absorptivity across various wavelengths of multiple salt solutions.…

    • 843 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    Dry Ice Lab

    • 289 Words
    • 2 Pages

    When dry ice is put into water they start to reacting and boiling. That reaction is called sublimation. Sublimation is when something solid goes straight to gas skipping the liquid phase. So because the water is warm it heats up the dry ice which causes it to form a gas. The gas is carbon dioxide.…

    • 289 Words
    • 2 Pages
    Improved Essays
  • Improved Essays

    However, this temperature was lower than the boiling point of acetone, the most volatile solvent possibly present in the unknown solution, pointing to a source of error in the measurement of the temperature. This could have been due to an inaccurate thermometer or to an error in placing the thermometer too high. Because the boiling point was so low, the more volatile solvent was estimated to be acetone, which has a boiling point of 56.5°C. After fraction A was collected, the temperature of the stillpot was increased and should have produced a steady increase in a plot of the temperature versus total volume distilled while fraction B (a mixture of the two components) was collected, until a second plateau at the boiling point of the less volatile component. The temperature of the stillpot needed to be increased after collecting fraction A because the liquid left in the stillpot was then composed of a higher percentage of the less volatile component, with a correspondingly higher vapor pressure, meaning that it would boil at a higher temperature.…

    • 958 Words
    • 4 Pages
    Improved Essays
  • Superior Essays

    Increasing the temperature of a solvent speeds up the movement of its particles. This speeding up will cause more solvent particles to collide into the solute. Under those circumstances, solute particles end up breaking loose and dissolve faster. Temperature usually affects solubility rates. Heating up the solvent gives the molecules more kinetic energy.…

    • 1462 Words
    • 6 Pages
    Superior Essays
  • Improved Essays

    Chasing Ice Analysis

    • 679 Words
    • 3 Pages

    Sungwoong Lee My brother and I watched the film Chasing Ice together on Wednesday. I watched all of the trailers that were on the list. However, among those 5 films of the list, I decided to watch the Chasing Ice because the scenery of Arctic was magnificent and I’m also interested in topic of global warming and wanted to know more about how the global warming affects to the glaciers in Artic.…

    • 679 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    Intermolecular Forces

    • 1213 Words
    • 5 Pages

    INTRODUCTION The trends in physical properties of organic compounds such as boiling points and melting points can be deducted from their structures, including size (molecular weight, surface area), shape and functional groups. These factors significantly influence the strength of the intermolecular forces of attraction present; and the nature and strength of intermolecular forces determine the variations in boilingpoints of organic compounds. The boiling point of a liquid is the temperature at which its vapor pressure equals the external or atmospheric pressure. At this temperature, every molecules of the liquid acquire enough kinetic energy to overcome the intermolecular forces attracting them to the other molecules.…

    • 1213 Words
    • 5 Pages
    Improved Essays
  • Superior Essays

    Ice Melts Essay

    • 1292 Words
    • 5 Pages

    Does the type of liquid affect how fast an ice cube melts? Does the type of liquid affect how fast an ice cube melts? In an experiment (not ours) involving three liquids, pop melted the ice within it the fastest out of the three. Molecules cause ice to melt in a pretty simple way. When salt is thrown on snow or ice, it prevents the ice or snow from freezing over once again.…

    • 1292 Words
    • 5 Pages
    Superior Essays
  • Improved Essays

    The melting point of a substance is best described as the temperature at which a solid becomes a liquid (Bruice 2014). On the molecular level, when a compound melts the forces between the molecules become weaker. This is because when a substances heats up the kinetic energy between the molecules increase causing the molecules to vibrate. When the vibrations become strong enough for the molecules to move around and pass other molecules, the compound that is being heated up starts to melt and become a liquid.…

    • 756 Words
    • 4 Pages
    Improved Essays
  • Great Essays

    Ice Cubes Lab Report

    • 1236 Words
    • 5 Pages

    HYPOTHESIS: As the ice cubes melt in the warm water, the melted water from the ice should flow towards the bottom of the cup because the melted colder water is denser than the surrounding water. PURPOSE: The purpose of this experiment is to improve my ability to observe an experiment. In addition, it will help aid me in making proper observations while also drawing conclusions. RAW MATERIALS:…

    • 1236 Words
    • 5 Pages
    Great Essays
  • Superior Essays

    The Thermodynamics of Potassium Nitrate Dissolving in Water Introduction: This experiment focuses on thermodynamics or the study of heat and molecular randomness. It helps illustrate how and why potassium nitrate (KNO3) dissolves in water. When it dissolves, it dissociates into potassium (K+) and nitrate (NO3-) ions. These ions can also recombine into solid potassium nitrate. This reaction can reach a state where concentrations of ions remain constant or Ksp; which stands for the equilibrium concentration for the solubility product.…

    • 1221 Words
    • 5 Pages
    Superior Essays
  • Great Essays

    Sugar Dissolving Lab

    • 1835 Words
    • 8 Pages

    PURPOSE/QUESTION The question that we will answer using this laboratory report is, “How is the rate of dissolving sugar affected by changing the temperature of the water, changing the rate of stirring, and changing the size of the crystal?” The independent variable of each laboratory experiment is different, however they are all being changed to get consistent and effective results for one dependent variable. The three independent variables are the temperature of water, rate of stirring and size of the crystal and the dependent variable of the all the experiments is the rate of sugar dissolving. HYPOTHESES Below are the laboratory experiment hypotheses that we have formed as a group to figure out what will happen to the rate of dissolving under…

    • 1835 Words
    • 8 Pages
    Great Essays
  • Superior Essays

    The Calorimetric Determination of Enthalpy and Entropy Changes of the Thermal Decomposition of Sodium Sulphate Decahydrate Abstract Sodium sulphate decahydrate thermally decomposes to anhydrous sodium sulphate at 50⁰ C and cools to form anhydrous sodium sulphate. Using Hess's Law the enthalpy and entropy changes of this process can be determined in order to deduce the spontaneity of the reaction. The transition temperature was determined by melting the hydrated crystals at 50⁰ C and allowing them to cool until a constant temperature was reached. The molar enthalpy and molar entropy changes were determined using calorimetric principles. Different weights of both decahydrate and anhydrous crystals were added to water and the temperature changes…

    • 1185 Words
    • 5 Pages
    Superior Essays