Ci Engine Essay

Improved Essays
This project is a group work, will be accomplished by three students in about 20 weeks. A single cylinder test engine block will be combined with a Ford cylinder head, then to be installed on the testbed coupled with an AC dynamometer. After connecting the control sensors, the engine will be tested in various operating conditions.

1.1 Background

Engine is a machine which converts any form of energy into mechanical energy, especially the combustion engine converts combustion energy into mechanical energy. The reciprocating internal combustion engine has two main types:SI engines, where the fuel is ignited by a spark; and CI engines, where the rise in the temperature and pressure during compression is sufficient to cause spontaneous ignition
…show more content…
Rudolf, a German inventor, patented the principle of the diesel engine in 1893. Since 1900, the diesel engine has been used in practically all the heavy industry and in any place that needs tremendous power. In the diesel engine, air alone is compressed in the cylinder; then, after the air has been compressed, injector vaporizes a charge of fuel into the cylinder, and ignition is accomplished by the heat of compression. The main difference between the diesel engine and the gasoline engine is: the diesel engine use a low-grade oil for fuel, which is ignited in the cylinder by the heat of air compression. However, the gasoline engine requires high-grade fuel oil, which is ignited by an electric spark after the gasoline has been mixed with air in carburettor, injected into the cylinder and the mixture compressed. …show more content…
For example, a body in which the distribution of an unknown variable (such as temperature and displacement) is required. Firstly, the region is divided into an assembly of subdivisions called elements, which are considered to be interconnected at joints, known as nodes. The combined elemental representations adequately approximate the variable. The distribution across each element may be defined by a polynomial (for example, linear or quadratic) or a trigonometric function. After the problem has been discretized, the governing equations for each element are calculated and then assembled to give the system equations. Once the general format of the equations of an element type is derived, the calculation of the equations for each occurrence of that element in the body is straightforward; it is simply a question of substituting the node coordinates, material properties and loading conditions of the element into the general format. After solving for the unknown nodal values, it is then simple to use the temperatures to calculate the elemental heat flows, or the displacements to find the strains and then the elemental stresses. The finite element method is a straightforward and logical procedure following a well-defined path.

Related Documents

  • Great Essays

    NASCAR is one of the world’s most popular sports attracting millions of viewers every Sunday to watch their favorite drivers race hundreds of miles across the race track at intense speeds. Many people who love to tune in and watch the sport are not aware of the chemistry behind NASCAR. For the cars to be able to operate the way they do, a lot has to go into building them. Each track that is raced on brings different challenges to the race team whose job is trying to get their car to be the fastest and most efficient. Chemistry exists all throughout the car and in major parts of the car like the gas tank, windshield, engine and the tires.…

    • 1353 Words
    • 6 Pages
    Great Essays
  • Improved Essays

    The Small Engine Mechanic

    • 694 Words
    • 3 Pages

    Small Engine Mechanic Small Engine Mechanics test and inspect engines for malfunctioning parts. They inspect, service, repair, build, and maintain motorized power equipment. Mechanics often specialize in one type of equipment but can often work their way up to working on almost everything and they can begin to make their way up to work and repair everything. The working conditions or environment is generally in a well ventilated but noisy repair shop or garage. They can also make on site repair or work calls.…

    • 694 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    The major difference between diesel and gasoline is the way these explosions happen. In a gasoline engine, fuel is mixed with air, compressed by pistons and ignited by sparks from spark plugs. In a diesel engine, however, the air is compressed first, and then the fuel is injected. Because air heats up when it's compressed, the fuel ignites. Diesel engines do not contain spark plug, that makes it intake air and compress it, and then it injects the fuel directly into the combustion chamber (direct injection).…

    • 841 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    Ethanol Research Paper

    • 642 Words
    • 3 Pages

    Known as the human species oldest recreational drug, Ethanol is a colorless, flammable liquid, with a distinct smell, and burns with a blue flame. It has the chemical formula of CH3CH2OH (it's molecular formula) or C2H6O (it's empirical formula), that can also be abbreviated using chemistry notation as EtOH. It has a melting point at -173.2°F , and a boiling point at 173.1°F. Ethanol has many handy uses around the world, in many different places.…

    • 642 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    Napoleon- A brilliant General who overthrew the French directory in 1799, and 5 years later became emperor in 1804. His rise to power marked the beginning of popular authoritarianism- in which the ruler has absolute power, and people's freedoms are limited. France prospered under him. However, his downfall came when he tried to invade Russia in the winter, and was forced to retreat, and lost majority of his army on the way home.…

    • 1820 Words
    • 8 Pages
    Improved Essays
  • Improved Essays

    Diesel fuel tends to be thick and full of precipitates, or clumps. Many cars and trucks need to be oiled and maintained frequently, to ensure their efficiency. As EPA regulations passed, the use of diesel exhaust fluids in maintaining cars and trucks that can produce large amounts of exhaust was mandated. Diesel exhaust fluids are not needed in a diesel truck, because by the time the diesel fluid hits the Diesel particulate filter, the diesel is disintegrated. The diesel exhaust fluid is burned at 600 degrees before getting to the filter, usually burning up only to temporarily lube the gears like lotion to skin.…

    • 1982 Words
    • 8 Pages
    Improved Essays
  • Improved Essays

    Fuel Efficiency Invention

    • 1009 Words
    • 5 Pages

    To what extent did the invention and development of the automobile affect the United States’ engagement in increasing fuel efficiency? A: Plan of The Investigation. The objective of this investigation is to research the question of the development of the automobile’s influence on fuel efficiency relative to the whole of United States fuel efficiency on a residential, commercial, and industrial scale. Fuel is defined by Merriam Webster as “a material (such as coal, oil, or gas) that is burned to produce heat or power”, and it will be used as such along the length of this investigation.…

    • 1009 Words
    • 5 Pages
    Improved Essays
  • Improved Essays

    Diesel Mechanic Essay

    • 1204 Words
    • 5 Pages

    Diesel Mechanic “Diesel service technicians and mechanics inspect,repair,or overhaul anything with a diesel engine” (“U.S. Bureau of Labor Statistics”). Diesel mechanics have to follow inspection lists to check for potential failures, test drive or run a vehicle or machine to diagnose a possible malfunction, also they are required to keep themselves and work area clean and safe. “A diesel mechanic is a person who repairs diesel machines and keeps them running properly” (“Merriam-Webster”). In researching the career of a diesel mechanic I have found the career requirements and qualifications,working conditions and salary, what a typical day is like, future needs, my interest, and I constructed a personal interview with someone in this field. Career Requirements and Qualifications…

    • 1204 Words
    • 5 Pages
    Improved Essays
  • Improved Essays

    Persuasive Engines

    • 228 Words
    • 1 Pages

    A V8 is an eight-cylinder V engine with the cylinder mounted on the crankcase in two sets of four cylinders, in most cases set at a right angle to each other, but sometimes at a narrower angle, with all eight pistons driving a common crankshaft. V8 engines are one of the most powerful and reliable engines known to history, V8 engines are popular in the U.S. and are used in Nascar and the National Hot Rod Association, they are easy to work with and are still used in vehicles today. You can properly build a high performance V8 engine if you follow these easy steps. First decide what kind of engine manufacturer fits you whether it’s Chevrolet, Ford, or Chrysler. Then visit to your local performance shop, select what kind of accessories you want…

    • 228 Words
    • 1 Pages
    Improved Essays
  • Improved Essays

    Diesel Mechanic

    • 928 Words
    • 4 Pages

    Diesel Mechanic The history of the diesel mechanic started when the diesel engine being manufactured in the 19th century. The engine was created in 1892 by rudolph diesel. In 2014 263,900 people are counted as being employed in this career field and as times are changing there is a need for more mechanics. Some trends inside of this job are diesel performance, which is building engines to large amounts of horsepower for regular driving towing or racing.…

    • 928 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    For over one hundred years Briggs and Stratton has been the leader in small engine manufacturing; from America to China people have relied on the engines by Briggs and Stratton for the highest quality they can get out of their dollar. That is why Briggs and Stratton is one of the world leaders in small engine manufacturing. This paper will cover their history, engines made, the hard times, and other fields of manufacturing that Briggs and Stratton has been involved with. Briggs and Stratton has founded in nineteen o eight when Stephen Briggs and Harold Stratton decided to create a new type of engine. After creating this engine Briggs and Stratton decided to keep pushing the boundaries of what was thought possible; they came up with ideas that…

    • 1143 Words
    • 5 Pages
    Improved Essays
  • Improved Essays

    A diesel engine has around 370 horsepower and 750 pounds of torque in a stock engine, making it a better truck to haul heavy loads with things with(6.6L Duramax LML SPECS)(6.7L Cummins Horsepower & Torque by model year)(Ford Diesel specification). Diesel trucks are used to pull trailers and other big loads like cattle trailers, equipment, and pulling trailers at fairs. Diesel trucks are also more commonly tricked out to sport around, they pull good, sound good, and look good. People like to jack them up, put nice tires on, and customize the motors and exhaust systems on them.…

    • 621 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    Since there was not much written about the business aspect of diesel, diesel is underrated when it comes to a saving money. The business aspect of diesel on how it saves money compared to gasoline engines is that diesel engines are more robust, require less maintenance compared to gasoline engines, and get better fuel economy. The first business aspect of how diesel cars save money is that they require less maintenance than gasoline engines. The reason why diesel engines need less maintenance is because “There is no sparking as the fuel auto-ignites.…

    • 838 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    Also Diesel engine parts are generally built stronger and the diesel fuel has superior liberating properties. Plus diesel vehicles never fail to start do to ignition problems, because they do not run off high voltage-ignition systems like gas…

    • 726 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    They have done wonders for the world and both want the same outcome; power, longevity, fuel economy and reliability,however, they are both different in their own way. The Gasoline and Diesel engine have differences and similarities that an average person might not know. These differences comes all the way from the first invention to the engine that runs in vehicles today. Diesel and Gasoline engines have differences and those differences can be for the better or for the worse. Fuel efficiency is a huge part in the world…

    • 1781 Words
    • 8 Pages
    Improved Essays