Play Doh Process Analysis

While playing with Play Doh is easy to learn it is difficult to master. After hard-work and hours of practice anything you think of can be created with Play Doh. The steps to create your own masterpiece can be numerous and complicated or few and simple the choice is yours.
The first step to creating your own Play Doh gem is to gather your necessary supplies. Take the Play Doh from one container and roll it into a rather thick log three inches long. After you have completed your three inch log cut off a piece one inch long. Set aside the remaining two inches for later use.
Next you will want to take the one inch piece and separate it into two equal size pieces. Of each one of these pieces you will want to take a small portion from each and set the larger half inch pieces aside. Roll the small portions into logs that are thin and one inch long. Set the newly …show more content…
The half circles should be the same size and shape above all else to make the finished product look right.
Now you will take the two inch log and pinch the bottom of it to create four small raised surfaces. There should be two in the front and two in the back, on the bottom of the two inch log. Smooth out around the pinched areas to make the log look uniform.
You will then choose one of the vertical sides of the two inch log to become the back of your animal. With your fingers pinch out a long, thin piece that will stick straight out from the back. The long thin piece should be about an inch long and smooth throughout as well as down around the base. Keep the two inch log in front of you and pick up the two half circles you created. Take one of the half circles and attach it to one of the long sides of the two inch log. Attach the half circle towards the top and angle it slightly up towards the ceiling. Take the second half circle and do the same thing, but on the opposite side of the