M2 TM 213 23 P 15 MARCH 2013 FIELD MAINTENANCE MANUAL CAL Essay

73810 Words Mar 23rd, 2015 656 Pages
ARMY *TM 9-1005-213-23&P
AIR FORCE TO 11W2-6-3-172
MARINE CORPS TM 02498B-OI
NAVY SW361-AC-MMM-010
TECHNICAL MANUAL
FIELD MAINTENANCE MANUAL
INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
(INCLUDING DEPOT MAINTENANCE REPAIR PARTS)
FOR
MACHINE GUN, CALIBER .50: M2, HEAVY BARREL
FLEXIBLE, W/E, NSN 1005-00-322-9715 (EIC 4AG)
FIXED M48 TURRET TYPE, NSN 1005-00-957-3893 (EIC 4BB)
MACHINE GUN, CALIBER .50: M2, HEAVY BARREL
FLEXIBLE W/O EQUIPMENT NSN 1005-00-726-5636 (USMC)
SOFT MOUNT, NSN 1005-01-343-0747 (NAVY)
FIXED TYPE RIGHT-HAND FEED, NSN 1005-00-122-9339 (NAVY)
FIXED TYPE LEFT-HAND FEED, NSN 1005-00-122-9368 (NAVY)
*SUPERSEDURE NOTICE - This technical manual supersedes TM 9-1005-213-23&P dated 15 March 2002, including all changes.
…show more content…
b

03/15/2011 Rel(1.10) root(warnsum) wpno(Paper_warnsum)

TM 9-1005-213-23&P

WARNING SUMMARY - Continued
GENERAL SAFETY WARNING DESCRIPTIONS - Continued

WARNING

BACK PLATE SPRING
The back plate is spring-loaded and can cause serious injury if installed or removed improperly.


DO NOT attempt to charge machine gun without the back plate assembled to machine gun.



Never remove the back plate assembly from any machine gun until the chamber has been cleared and bolt is in forward position.



DO NOT stand behind the machine gun while removing back plate assembly.



Stand to one side of the machine gun when removing back plate assembly.

Failure to comply may result in serious injury to personnel.

WARNING

HOT BARREL
The M2 can become extremely hot. After firing, ensure that sufficient time is allowed for machine gun to cool before performing inspection or cleaning procedures. Failure to comply may result in injury to personnel.

c

03/15/2011 Rel(1.10) root(warnsum) wpno(Paper_warnsum)

TM 9-1005-213-23&P

WARNING SUMMARY - Continued
GENERAL SAFETY WARNING DESCRIPTIONS - Continued

WARNING

EXPLOSION


All M2 machine guns must be inspected and gauged at least once annually for safety and serviceability. If the machine gun is not properly gauged, it is considered Non-Mission Capable (NMC) and could malfunction if fired. Air Force users will refer to the inspection requirements in Air Force Instruction 36-2226.
Failure to comply may result in injury or death

Related Documents