Lean Operations Case Study

Decent Essays
Register to read the introduction… The goal of lean operations is to produce output using fewer resources than traditional planning systems.
TRUE

Difficulty: Easy
TLO: 2
Taxonomy: Knowledge 21. "Autonomation" indicates that the firm is attempting to reduce its dependence on automated equipment.
FALSE

Difficulty: Easy
TLO: 3
Taxonomy: Knowledge

22. "Preventive maintenance" is additional maintenance done immediately after a breakdown has occurred to help prevent any further breakdowns.
FALSE

Difficulty: Easy
TLO: 3
Taxonomy: Knowledge 23. In the lean approach, inventories are reduced gradually, instead of eliminating inventories as rapidly as possible.
TRUE

Difficulty: Easy
TLO: 5
Taxonomy: Knowledge 24. One problem with lean operations is that they can lead to much frustration and disappointment of people on the shop floor due to the need for continuously monitoring and expediting resource availability.
TRUE

Difficulty: Medium
TLO: 6
Taxonomy: Knowledge 25. A real advantage of the lean philosophy is the reduction of co-ordination effort required.
FALSE

Difficulty: Easy
TLO: 4
Taxonomy: Knowledge

26. The lean philosophy recognizes that some work-in-process inventories are a necessary investment to allow for smooth
…show more content…
reduce overhead
E. eliminate inventory

Difficulty: Medium
TLO: 4
Taxonomy: Knowledge

79. The ultimate objective in a lean system is:
A. low to moderate levels of inventory
B. high quality, zero defects
C. minimal waste (less than 6%)
D. balanced and rapid flow
E. all of the above

Difficulty: Medium
TLO: 2
Taxonomy: Knowledge

Essay Questions 80. The All Seasonings Company uses 3,200 glass jars at one of its jar-filling workstations each eight hours of production. The cycle time for a standard container, which holds 90 jars, averages 45 minutes. If management uses an efficiency factor of twenty percent, how many containers should be used?
N = ?
D = 3200/8 = 400 jars per hour
T = 45/60 = .75 hour
X = .20
C = 90 jars

AACSB: AS
Difficulty: Medium
TLO: 5
Taxonomy: Application

81. The Four Star Publishing Company uses sixty reams of paper each hour at one of its high speed printing stations. The cycle time for a standard container, which holds 15 reams of paper, averages forty minutes. If management has decided to use three containers, what efficiency factor was applied?
X = ?
N = 3 containers
D = 60 reams per hour
T = 40/60 = 2/3 hour
C = 15

Related Documents

  • Improved Essays

    The training objectives will be met with little to now formal instruction, but through activity. There is already a sense of apprehension to lean in the hospital; therefore, I have narrowly scoped the training objectives. Wlodkowski’s (2008) strategy, (STRATEGY 6) which recommends clearly identifying learning objectives, supports this decision. The intent is to avoid confusing the learners with lean terms and lingo. As Wlodkowski’s (2008) suggest that learning by doing allows the learner to demonstrate the acceptable performance.…

    • 747 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    “Lean manufacturing, on the other hand, tackles the inefficiencies throughout the value streams of an organization. Eliminating or minimizing the eight wastes, lowers costs, while short runs make it easy to spot and deal with quality issues. These areas are addressed by the lean manufacturing approach. However, lean manufacturing alone will not lead to a Six Sigma quality level (Ward et al,2015).” This approach is suggested because unlike Chipotle quality does not seem to be a factor.…

    • 1043 Words
    • 5 Pages
    Improved Essays
  • Improved Essays

    Long-Term Care Case Study

    • 296 Words
    • 2 Pages

    Internal Interest in lean methodology by the CEO of Lakeview Regional Hospital, Charlotte Ekins The staff at Lakeview are not familiar with concepts of lean methodology Ministry of Health and Long-Term Care to organize meetings to discuss the topic of improving flow and wait time in Emergency Services. Lakeview staff are worn down by multiple performance improvement initiatives Long wait times are becoming common; on average the wait time is approximately 10 hours The Emergency Department is experiencing shortages for five full-time RN vacancies and two part time RN vacancies Over-extended 30-bed Emergency department, where patients are frequently held on stretchers in the hallways Overtime is averaging 50% Inpatient and outpatient services…

    • 296 Words
    • 2 Pages
    Improved Essays
  • Improved Essays

    In addition to TJC tool and the PDCA cycle, the AH Organization has an operational excellence approach that follows the lean…

    • 1691 Words
    • 7 Pages
    Improved Essays
  • Improved Essays

    Continuous Process Improvement (CPI) methods and tools, used by the Department of Defense and the Department of the Navy increase readiness and utilize resources more efficiently and effectively. CPI integrates best business practices with tools most commonly used in the industry today. Many of you will use the tools of CPI in your daily work. The three process improvement tools include Lean, Six Sigma, and The Theory of Constraints. In order to conduct a successful project, the team will have to follow strict guidelines every step of the way.…

    • 582 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    The basic concept of the Six Sigma trend is to obtain a workflow that minimizes the efforts made by the employees (walking distance, tests waiting for reviews, and processing times) and maximizes the output of results to the customers (Joseph, 2006). There are five steps to a lean lab effort. Thompson et al. (2014) lists them as follows: “First, the lab must define the goals for improvement.…

    • 1457 Words
    • 6 Pages
    Improved Essays
  • Great Essays

    Dissimilar to the Healthcare Industry, the American Automobile Industry has improved because they figured out a better way to make a car by learning how to be a true “Lean Organization.” In Healthcare, guidelines and feedback on performance data have shown significant improvement, but these tactics are not enough. The first principle discussed is the Reduction of Waste. We have not scratched the surface of this principle yet since very few organizations have built their foundations on the broad idea of reducing waste. As much as 95% of healthcare effort is wastes.…

    • 2119 Words
    • 9 Pages
    Great Essays
  • Great Essays

    Zara Fashion System Analysis

    • 2487 Words
    • 10 Pages

    Fast fashion system mainly contains two components that make it superior from other systems. One component is short production and distribution lead times, which helps match supply and demand so eventually minimize the gap between them. Another component is highly fashionable design capabilities that enhance the desires of consumers and increase sales (Cachon and Swinney, 2010). As a fast growing fast fashion brand, Zara is “the most innovative and devastating retailer in the word”, called by the luxury goods maker LVMH’s fashion director (Gallaugher, 2008). I will use Zara as a case to inspect fast fashion’s remarkable innovation for the whole fashion…

    • 2487 Words
    • 10 Pages
    Great Essays
  • Improved Essays

    Looking at Seattle Children’s Hospital and its continuous improvement for over fifteen years, one can see the value in executing Lean principles in a health care facility. Because Lean principles focus on long-term continuous improvement, I believe that it is the best quality management system for health care facilities. Though other systems have value for specific problems (Rapid Cycle Improvement for example to solve a problem quickly), the core of Lean is to eliminate waste, standardize procedures, and promote efficiency and better quality product now and in the future, for the facility as a whole. According to Spath (2013), when Lean projects are successful, more is achieved with less because of the elimination of unnecessary waste. Patients are the cornerstone of health care, and by erasing steps that are of no value to the patient, health care facilities will provide higher quality care, and save both the facility and the patient costs, whether the costs are monetary or not.…

    • 647 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    Production Needs Under Armour currently manufacturers most of their products by third parties overseas. “In 2006, our products were primarily manufactured in Asia, Central and South America and Mexico” (Under Armour, 2016). However, their distribution center remains in Maryland. Only a select number of products though are filtered through their distribution center. When Under Armour enters the golf equipment business there are numerous factors to consider in obtaining the raw materials, manufacturing, and distribution.…

    • 860 Words
    • 4 Pages
    Improved Essays
  • Superior Essays

    Question 1. Aggregate inventory data suggest that while overall average inventory levels are declining, the relative percentage being held by manufacturers is increasing. Explain why you think this observation is either true or false. Describe how such a shift could benefit the operations of the entire channel and how manufacturers could take advantage of the shift.…

    • 1166 Words
    • 5 Pages
    Superior Essays
  • Improved Essays

    Its marginal cost curve is MC = $100 per day. Assume that the firm faces no fixed cost. a. How much will the firm produce? b. How much will it charge? c. Can you determine its profit per day?…

    • 719 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    Heijunka Analysis

    • 761 Words
    • 4 Pages

    Process Description of Heijunka Introduction Heijunka is a tool used in lean manufacturing which focuses on eliminating waste without losing productivity through a manufacturing technique that relies on leveling production. Popularized by Toyota, lean manufacturing is often seen as an alternative and more effective manufacturing process than mass production that is commonly used in America (Friddle n.d.). Whereas mass production relies on production in large batches to obtain the lowest cost per part possible, lean production instead focuses on the flow of production, adjusting flow as demand changes. One of the primary problems heijunka serves to solve: how do you produce the correct amount of product when demand is always changing?…

    • 761 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    Figure 1: Operation Management Function The main goal of the operations management would be to productively need to utilize the available resources, create products or provide service that meet customer needs and requirements, which efficiently handle the processes without any confusion. The responsibility and the accountability of the operations management is to ensure the output of the input transform through all the process happens with high efficiency, continuously and without any kind of interruptions. The main six factors which are influencing in the operation management are: process and product design, lean production techniques, capacity management, organizations and systems development, performance and improvement strategy and supplier development strategy (Stevenson, 2014).…

    • 998 Words
    • 4 Pages
    Improved Essays
  • Superior Essays

    1) Nissan Motor Manufacturing UK Limited (NMUL) is UK’s largest car manufacturing plant which is located near Sunderland in 1986. It has been Europe’s most productive car plant for the past seven years, cars produced include the Almera, Micra and Primera. Over 70% of output is exported to 55 markets worldwide. The landscaped NMUK site incorporates conservation areas, such as ponds, lakes and woodland and currently has 10 onsite wind turbines, producing up to 10% of the energy, required for the plant. The site is located 5 miles from Port of Tyne where international distribution is based.…

    • 1672 Words
    • 7 Pages
    Superior Essays