Though a solvent is need for cleaning guns, the way to get the gunk exposed is to string a wire brush through the barrel. This clears out all of the bigger pieces of residue out, all the while exposing the little dust-sized particles of powder. When this is done, attach a slotted patch holder to a rod and dip a patch in the solvent. The patch holder makes it easier to keep the solvent-covered patch in place and steady. Run the rod back and forth through the barrel until the entire inside of the barrel is glossy and slick with solvent. After the barrel is shiny and clean, attach a dry patch to the patch holder and run that through the barrel multiple times. If the patch becomes black with powder residue, make sure to change it out so the barrel isn’t being dried with a dirty patch, negating all the work that was already done. After drying out the solvent with the patch, remove the patch holder from the rod and replace it with a bore mop. What this tool does is fine tune the cleaning process. It polishes the inside of the barrel causing it to last much longer than a dirty
Though a solvent is need for cleaning guns, the way to get the gunk exposed is to string a wire brush through the barrel. This clears out all of the bigger pieces of residue out, all the while exposing the little dust-sized particles of powder. When this is done, attach a slotted patch holder to a rod and dip a patch in the solvent. The patch holder makes it easier to keep the solvent-covered patch in place and steady. Run the rod back and forth through the barrel until the entire inside of the barrel is glossy and slick with solvent. After the barrel is shiny and clean, attach a dry patch to the patch holder and run that through the barrel multiple times. If the patch becomes black with powder residue, make sure to change it out so the barrel isn’t being dried with a dirty patch, negating all the work that was already done. After drying out the solvent with the patch, remove the patch holder from the rod and replace it with a bore mop. What this tool does is fine tune the cleaning process. It polishes the inside of the barrel causing it to last much longer than a dirty