Ecet 340 Week 4

Decent Essays
ECET 340 Week 4 HomeWork 4

Purchase here

http://devrycourse.com/ecet-340-week-4-homework-4

Product Description

Determine the conversion time for an ADC0804 (8-bit), where 66 clocks per bit are required, if its clock frequency is 50 kHz.

2. If an 8-bit SAR has Vref = 10 V, what is the binary value for an input voltage of 7.28 V?

3. What is the percent error for the binary answer found in Problem #2?

4. Given an 24 MHz bus speed. Write down the line(s) of instruction which set the ATD1 unit for 2MHz conversion frequency, 10-bit resolution and 8 A-to-D clocks per sample time.

5. A single 10-bit, left justified conversion of 3.75V is complete in ATD0. Assume and
i. Name the register(s) where the result of the conversion is found
…show more content…
What is the percent error for the binary answer found in Problem #2?

4. Given an 24 MHz bus speed. Write down the line(s) of instruction which set the ATD1 unit for 2MHz conversion frequency, 10-bit resolution and 8 A-to-D clocks per sample time.

5. A single 10-bit, left justified conversion of 3.75V is complete in ATD0. Assume and
i. Name the register(s) where the result of the conversion is found ii. What are the values in each of the 16-bits of this register after conversion is complete? Assume the result is unsigned. Show work

6. Assume that a position-sensitive potentiometer can measure up to 25 cm over a voltage range of 0 to 5 V. If an 8-bit ADC outputs a value of 0111 1010, what is the distance measured?

7. Design the basic interface circuit (using an op amp) for a temperature sensor that covers a range of 0° to 70°C if the output of the sensor is 2 mV/1°C and the ADC voltage range is 0 to 4 V.
8. Design an amplifier suitable for converting the output voltage from an LM35 temperature sensor (10 mV/°C) into a signal that makes use of the full input voltage range (0-5V) of the HCS12 ADC port pins. Assume the LM35 is to measure temperatures from 0°C up to +150°C. Show work and

Related Documents

  • Great Essays

    (TCO C) A project to remodel an office area has the following activities. (Hint: You will need to build an AIB diagram, perform a forward pass, and perform a backward pass to answer this question.) ............... a) What are the critical path activities? (5 points) b) What is the project's scheduled completion time?…

    • 961 Words
    • 4 Pages
    Great Essays
  • Great Essays

    1. Goods versus Services. A. ISSUE: Discuss fully whether the contract between the Palermos and Colorado Carpet was primarily for the sale of goods or the sale of serv¬ices. The contract between the Palermos and Colorado Carpet was primarily for the sale of services because the Palermos orally agreed to the purchase and installation of the carpet.…

    • 1318 Words
    • 5 Pages
    Great Essays
  • Improved Essays

    Martin Luther Dbq

    • 383 Words
    • 2 Pages

    Answer C is correct because on page 42 of our…

    • 383 Words
    • 2 Pages
    Improved Essays
  • Improved Essays

    Nt1310 Unit 5 Lab Report

    • 1339 Words
    • 6 Pages

    The resistors R1, R2, RD, and RS calculated in the Prelab section were used to connect the circuit as shown in Figure 8-5. A load resistance RL of 10kΩ was used. The values of VD, VG, VS were measured and recorded. 3. The voltage vout was measured using an oscilloscope and the voltage gain AVG-D = vout/vin was calculated.…

    • 1339 Words
    • 6 Pages
    Improved Essays
  • Decent Essays

    Nt1310 Unit 5 Lab Report

    • 164 Words
    • 1 Pages

    We built the RLC circuit as shown in Figure 1 using 10 nF Capacitor, 1 kOhm Resistor, and 1 mH Inductor . Connect the circuit to the Analog Discovery Module and open the Digilent Waveform Generator. Set the AWG to a sinusoidal wave, the amplitude to 3 V, and the frequency to 1 kHz. Then open up the oscilloscope and measure the peak-to-peak voltage at node CH2+ . Run AWG1 Make a table of the input (Ch1+) and output (Ch2+) voltages beginning with 20 kHz and increasing by 10 kHz to 100 kHz Open Network Analyzer and set values to:…

    • 164 Words
    • 1 Pages
    Decent Essays
  • Improved Essays

    The business that I will use for my paper’s subject matter is a cabinet making company. Currently the company uses several business information systems. The corporation uses Peachtree accounting software, Microsoft Office for document publishing, an internally written MRP (material request planning), and Infinity QS systems for quality enhancement. All of these programs are currently running on the internal intranet but the systems do not communicate without cyborg intervention.…

    • 721 Words
    • 3 Pages
    Improved Essays
  • Great Essays

    Nt1330 Unit 6 Mis

    • 1255 Words
    • 6 Pages

    The main issue with FOS was coming up with an algorithm that determines the important deliverables of thermocouple systems by using time history data generated from a first-order system. Deliverables include: our MATLAB coded algorithm -which outputs the parameters yL, yH, ts, and � - an executive MATLAB file -which outputs SEE and standard deviation values- and a regression plot which compares the prices of FOS models to �. Determining these four parameters within 20.0% of the calibrated data points merits a fairly successful model. We had to deal with one important constraint: we are working with data specific to a first-order system, and must use equations that appropriately match.…

    • 1255 Words
    • 6 Pages
    Great Essays
  • Decent Essays

    Nt1420 Unit 8

    • 512 Words
    • 3 Pages

    4. Write C++ statements to define and initialize the following arrays using appropriate data types: a. An array of heights has 6 components which have the following values: 5.5, 5.8, 6.3, 6.6, 4.9, 5.9. b. An array of weights has 4 components which have the values: 140, 165, 190, 207. c.…

    • 512 Words
    • 3 Pages
    Decent Essays
  • Great Essays

    Exercise 101 Study Guide

    • 623 Words
    • 3 Pages

    __________________ 3. 5600 = ___________________ 2. 2700 = ________________ 4.…

    • 623 Words
    • 3 Pages
    Great Essays
  • Decent Essays

    Professor Christiansen Thank you, I am trying really hard on these assignments, it looks like I may be relying on these assignments to get me thru this class. Since I have been taking the test I have found out that I am not able to retain the information I just read like I used to. I had a hard time with exam #1 and I have discovered I have a hard time writing under pressure and I can not type very fast.…

    • 99 Words
    • 1 Pages
    Decent Essays
  • Improved Essays

    Ecg Lab Report

    • 1388 Words
    • 6 Pages

    The aim of this project is to develop an Electrocardiography (ECG) amplifier circuit from scratch. The main challenges include amplifying the desired week signal in the presence of noise from other muscles and electrical sources. As this semester was about transistors we had to use transistors at some stage in this project. The project was successfully designed and built in two ways: one with solely using operational amplifiers and other using transistors as differential amplifiers. Electrocardiography (ECG)/ Background…

    • 1388 Words
    • 6 Pages
    Improved Essays
  • Improved Essays

    Purpose: Measuring ‘g’ by dropping steel ball and Ping-Pong ball from the same height and record the time for each dropping. Then, using the equation “h=1/2g*t^2 to calculate ‘g’. For precise, we still need to find ∆g, therefore, the final data about g=gave+∆g. Method: Before we start to do the experiment, we need to find a position which can except the wind and flat ground.…

    • 1499 Words
    • 6 Pages
    Improved Essays
  • Decent Essays

    DChism 10/10/2017 American government Research Paper #2 Outline Opening Statement /Thesis: There are many thoughts and questions that plague my mind when it comes to the death penalty and although this is a controversial topic, many laws concerning it don’t seem to be right to me. I mean, I would like to know why take a life for a life when you have been giving a life sentence. This makes no senses and even though an individual may commit murder no one deserves to die. The United Sates is made up of three branches of government.…

    • 432 Words
    • 2 Pages
    Decent Essays
  • Decent Essays

    A 2 2 B 5 6 C 6 10 D 3 4 E 4 8 What is the average completion time for the first-come, first-served (FCFS) priority rule schedule? Average job tardiness? Average number of jobs at the center? 7.…

    • 1318 Words
    • 6 Pages
    Decent Essays
  • Improved Essays

    1. One key concept from The Goal by Eliyahu M. Goldratt was the Theory of Constraints. This theory stipulates that every firm has at least one factor or constraint that prevents them from achieving their goal – which is typically profit. The main constraints plaguing Alex Rogo’s factory were the bottlenecks. In this novel, Mr. Goldratt lists his five recommended steps for managing constraints.…

    • 1014 Words
    • 5 Pages
    Improved Essays