Step 1 Instruction: place a reflective triangle behind your vehicle if you’re changing the tire on the side of the road. This is for your safety.
Step 2 Instruction: use the wheel wedges against the opposite tires of the flat. This will secure the vehicle while it on the jack.
Step 3 Instruction: take the wheel cover or hubcap off. Be sure to use the flat end of the lug wrench to take the cover off. Now loosen the lug nuts with the wrench, but do not take them off.
Step 4 Instruction: place the jack underneath the car. Make sure it’s in the proper place. Pump it up so until it connects with the car’s fame.
Step 5 Instruction: raise the car until the flat tire is about six inches off the ground. Remove the lug nuts.