Experiment 301 Lab Report

Decent Essays
Experiment 301 is about linear expansion. When there is a change in temperature, all materials, whether it is solid, liquid or gas, experience a change in dimension. This phenomenon is called thermal expansion. When a material is heated, the molecules moves begin moving more, which takes up more space due to its movement, this means the material will expand. Generally, dimension increases as temperature increases. Linear expansion is one type of thermal expansion and it is the change in length of a material as it experiences changes in

Related Documents

  • Decent Essays

    Spacer Lab Report

    • 393 Words
    • 2 Pages

    General procedure: One equivalent of spacer was coupled using 2.4 equivalents of inhibitor, 0.18 equivalents of copper sulfate, 0.36 equivalents of (+)-sodium-L-ascorbate, in a mixture of 10% H2O in DMF, 24 mL/mmol spacer. The mixture was placed in the microwave for 30 minutes at 80oC Pro6 Spacer (10) (30 mg, 0.036 mmol) and 18 (36 mg, 0.087 mmol) were dissolved in 778 µL DMF. Copper sulfate (1.62 mg, 0.006 mmol) and sodium-L- ascorbate (2.57 mg, 0.013 mmol) were dissolved in 86 µL H2O. The two solutions were combined in a microwave tube and put in the microwave for 30 minutes at 80oC. The solvent was evaporated under reduced pressure.…

    • 393 Words
    • 2 Pages
    Decent Essays
  • Improved Essays

    Nt1310 Lab Report

    • 1745 Words
    • 7 Pages

    The Channel EQ and the Compressor are perhaps the most used Plugins on your Channel Strips. To add them to a Channel Strip is as simple as clicking on the Plugin Button ➊ and select them from the Plugin Menu ➋. However, there are faster ways to do that. ➡ Attention There are two Channel Strip Components that are visible by default (you can toggle them in the Channel Strip Component Window ➌ (open as popup menu or Popover window): Channel Strip Components ➌ • Gain Reduction Meter ➍: When the Compressor Plugin (or the Limiter, or Adaptive Limiter) is loaded on the Channel Strip, then this purple meter displays the amount of gain reduction. • EQ Thumbnail ➎: This area displays the frequency curve of the Channel EQ Plugin.…

    • 1745 Words
    • 7 Pages
    Improved Essays
  • Improved Essays

    Nt1310 Unit 12 Lab Report

    • 177 Words
    • 1 Pages

    Procedure 1- Set up the DAQ to output port 2 to send a binary data. 2- Run the LabView in continues mode, change the numerical input on the control panel, and observe the LEDs on the terminal block between (PB0- PB7).…

    • 177 Words
    • 1 Pages
    Improved Essays
  • Improved Essays

    Domestos Lab Report

    • 818 Words
    • 4 Pages

    The purpose of this report is determine whether the natural product; vinegar, is better than man made chemical products; Domestos and Pine O clean. This will be determined by the results of the experiment which product has created the largest zone of inhibition. To determine which of the three disinfectants are the most effective depend the one with the largest inhibition zone. Bacteria are tiny microorganisms that colonise together and are found in every living organism.…

    • 818 Words
    • 4 Pages
    Improved Essays
  • Decent Essays

    C. 5.12 Lab Report

    • 143 Words
    • 1 Pages

    R.C. 5.9 Mathematics (Mobile Infant) Activity: “Stack Them Up” Materials: Stacking blocks, nesting cups, measuring cups Infants are continually growing in all areas of development. In this activity, the goal is to get the infant to stack their blocks or cups. The teacher would have the child sit on the floor or at a table with their toys.…

    • 143 Words
    • 1 Pages
    Decent Essays
  • Improved Essays

    Beaker Experiment

    • 991 Words
    • 4 Pages

    Fill the flat beaker with water. 6. Place a plastic bag over the top of the cylinder and place it, upside down, in the flat beaker. Make sure the bottom of the beaker is always underwater. 7.…

    • 991 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    Nt1310 Lab Report

    • 323 Words
    • 2 Pages

    Eq.\ref{Bi} is a projection of the attribute vector $I_i$ in the eigenspace spanned by the first $k_c$ eigenbackgrounds, being $\textbf{b}$ the coefficient vector of the combination. In the standard EIG method the number of eigenbackgrounds retained $k_c$ is chosen by fixing a threshold for the last eigenvalue $\lambda_{k_c}$ retained. The background obtained $B_i$ are then subtracted to the original image and a moving object is identified as the regions of the images in which $I_i-B_i$ is larger than a given threshold. \\In this work the technique was customized for the detection of the moving membrane. At the scope, the backgrounds are constructed considering only the time varying part, $B_i=\Phi_{k_c} \, \textbf{b}$, having rank $k_c$ computed from the distribution of energy…

    • 323 Words
    • 2 Pages
    Improved Essays
  • Improved Essays

    My Som Expo Experiment

    • 785 Words
    • 4 Pages

    My STEAM Expo experiment was testing which hamster food gives hamsters the most energy to hamsters. I tested three store brand foods: Carefresh Complete, Sunseed, and Nibble Rings. I also tested one that I made based off of the research that I did prior to the experiment. I thought that this project was perfect for my three hamsters, because they are all very tired and lazy. I also think that other people can use my type of food so that their hamsters can be energetic, too.…

    • 785 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    Diana Baurind Experiment Analysis

    • 886 Words
    • 4 Pages
    • 4 Works Cited

    Because the experiment takes place in a laboratory, Baumrind argues that participants will not act how they might in the real world. She states that the laboratory is an unaccustomed setting for a typical being and may cause anxiety and passivity (225). Correspondingly, Saul Mcleod, a psychologist who summarizes and critiques Milgram’s experiment, states that the “important” location of the experiment, obedience levels increased (Simply Psychology). The point about setting is one in which Baumrind and Parker are able to reach a consensus.…

    • 886 Words
    • 4 Pages
    • 4 Works Cited
    Improved Essays
  • Decent Essays

    In this lab, we carried out a variety of reactions using different chemicals and metals. A chemical reaction is when the chemical state of the substance you are testing rearranges its ionic and molecular structure. One of the reactions we experienced was single replacement, this consists of one ion switching places with another ion to form a new compound. Another reaction we saw was double replacement. In this reaction, two compounds ions are switched to form two new compounds.…

    • 177 Words
    • 1 Pages
    Decent Essays
  • Improved Essays

    Purpose: Measuring ‘g’ by dropping steel ball and Ping-Pong ball from the same height and record the time for each dropping. Then, using the equation “h=1/2g*t^2 to calculate ‘g’. For precise, we still need to find ∆g, therefore, the final data about g=gave+∆g. Method: Before we start to do the experiment, we need to find a position which can except the wind and flat ground.…

    • 1499 Words
    • 6 Pages
    Improved Essays
  • Improved Essays

    Pglo Lab Report

    • 1131 Words
    • 5 Pages

    Purpose: The overall goal of this lab was to perform a procedure on E. Coli which involved transferring genes that encoded for the green fluorescent protein into E. Coli to see if the transferred genes would make a difference on the growth and whether or not the bacteria would glow under UV light. Hypothesis: If the bacteria with the pGLO plasmid was grown on a plate containing LB and ampicillin then the bacteria will grow but not glow under UV light. If the bacteria with the pGLO plasmid was grown on a plate containing LB, ampicillin, and arabinose then it will be able to grow and glow under UV light. If the bacteria without pGLO plasmid was grown on a plate containing LB and ampicillin then it will not be able to grow or glow under UV light.…

    • 1131 Words
    • 5 Pages
    Improved Essays
  • Improved Essays

    Discussion Graph 1 displays the reaction time (in minutes) of how long it took for the Alka-Seltzer tablet to completely dissolve per trial. Graph 2 displays the averages of the reaction time which showed the higher the water temperature is, the faster the reaction time would be. At 65⁰C the average time for the Alka-Seltzer to completely dissolve was 1 minute 4 seconds followed by 1 minute 20 seconds at 35⁰C and ending with the highest average at 2 minutes 1 second (1.61). The hypothesis stated that hot water temperature would make the Alka-Seltzer tablet dissolve the fastest.…

    • 711 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    A chemical reaction is the change of a molecule from one arrangement to another. Our whole bodies are made up of cells, which are chemical systems. To sustain life there must be chemical reactions all throughout the body (Barnhart and Hopper 2011). At what rate the reaction can occur is dependent on the activation energy. Activation energy is the amount of energy the reactant molecules must surpass for the reaction to occur (Mathew Bui et al. 2006).…

    • 1893 Words
    • 8 Pages
    Improved Essays
  • Improved Essays

    The purpose of this experiment was to determine the %NH¬3 in the cobalt compound. This experiment included two solutions: the first solution includes boric acid (H3BO3) and water; the second solution included the cobalt compound, sodium hydroxide (NaOH) and water. The sodium hydroxide helps separate the eater ligands attached to the cobalt ion. Once the hydrogen ion are separated the two molecules become neutral and precipitated is formed. Boiling the NH3 to H3BO3 will trap the NH3 and this will produce NH4+ + H2BO3-.…

    • 190 Words
    • 1 Pages
    Improved Essays