Differences Between Technical And Recreational Diving
The conventional limit exceeded by the form of scuba diving specially the recreational diving’s bottom time and depth is known as tech diving. It is also known as Technical Diving. The Technical and Recreational Scuba Diving can be distinguished with lots of differences. According to many people, there are not any obvious differences between Tech and Recreational Diving. They think that ‘diving is diving’ and it is useless to divide it into different types. In this article, we would tell you about some differences between Tech and Recreational Diving. Take a look at them.
Recreational Scuba Diving:
A diving that allows direct ascent at the pre-determined speed and controlled constant to the surface is …show more content…
The ‘No Decompression Limit’ is taught to abide to the Recreational Divers. It still allows direct access to the surface with the boundary of saturation. There is no such boundary for the tech divers. There is no NDL and they intend to accomplish their de-saturation during ascent. There is a quite grey area that shows the borderline between both dives. These days, the divers can control and calculate their dives with the different technological aids i.e. pc dive planning software and dive computers. The boundary is still provided and the aids don’t limit divers to an NDL. It depends on the calculating algorithm used and specific computer that two identical dives could be non-deco or deco. The frequency of scuba diving equipment malfunction never develops strong argument to a no-stop ascent profile for abiding. This equipment is very reliable. The deeper and longer dives are permitted by many divers that now use large cylinders to store gas-if they were in need to sufficient gas to complete stops. Divers can complete decompression’s format increasingly shallower depths through staging their dives due to multi-level computers …show more content…
They remain prepared for aborting the dive.
Redundancy of Gear: backups of all vital life support equipment are required in tech diving. There is a need to carry two timing devices, two depth gauges and two breathing systems. In order to deal with gear problems independently, technical divers carry redundant equipment.
It is necessary for you to take proper technical dive training before starting to do it. Some tips that need to consider before its training are given below:
• You need to gain experience at each level. It is necessary to learn every step with proper experience. In this way, you can become an expert in tech