A Report On The Pill Organizer Essay

1558 Words May 4th, 2016 7 Pages
This pill organizer is 7 inches in width, 1 inch in height, and 1 inch in length. While one organizer’s upper lids would be of clear yellow tinted plastic.The container would be divided into 7 even sections. Each sections lid would have the days initial(s) printed on the correlating upper tinted lid. The container will be standing on its’ side, for a further description, if a container were to be sitting flat on a surface with the upper tinted half facing up and the letters being readable from left to right. The lower container (A) where the pill lands would be turned approximately around flat on its’ surface 180 degrees clockwise, thus the letters would than be upside down. It would than be rotated so that the upper tinted halves hinges’ would now be on the flat surface. A hole would than be directly placed directly across from these hatches, directly in the center of this plate of plastic. The next hole would than be placed on the piece of plastic directly under these hatches. This hole would also be of one inch. This process would than be repeated for each of the seven chambers.
2nd Pill Organizer

This container would also be of 7 inches inches in width 1 inch in height, and finally, the volume would consist of 1 inch. The upper lids would be of a pink tinted plastic with the initial(s) of the days of the week printed on each correlating lid top. The upper container(B) would be turned 90 degrees clockwise so that if the hatches were pulled they would lie flat on the…

Related Documents