Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
19 Cards in this Set
- Front
- Back
For the XenMobile server Appliance install, what's the default password and how do you set it? |
No default password. On first boot you are prompted to enter one. |
|
Is FIPs enabled or disabled by default? |
Disabled. |
|
What are the default ports for http, https (with CERT), and https (No-Cert), and mgmt. |
80 - HTTP 443 -HTTPS (CERT) 8443 -HTTPS (no cert) 4443 -MGMT |
|
Can you change the Xenserver FQDN after initial setup? |
NO |
|
What's the default username for the XenMobile Server console? |
admin |
|
How do you add another Xenmobile Server to a Xenmobile Server cluster? |
Spin up another appliance, & during initial setup wizard enter the same database server, database name & credentials. The new XenMobile Server will see the existing database and add itself to the cluster. |
|
What do you see at the command prompt on the appliance console? |
The FQDN of the cluster (first Xenserver in the cluster). |
|
What FQDN do you see at the console of subsequent XenMobile Servers added to the cluster? |
The same FQDN as the first Xenmobile server added to the cluster. |
|
After you create the XenMobile Server cluster, using the appliance console, where do you finish setup? |
At the console, http://FQDN.domain.com:4443 you are presented with a setup wizard. |
|
1.) What's the first step in configuring Xenmobile from the web console? 2.) And the second step? |
1.) Setting a license, either local, or remote (License Server, port 27000). 2.) Importing certificates |
|
What are the 4 different kinds of Certs you can import to the XenMobile Server? |
1. APNS 2. SAML 3. Server 4. SSL Listener |
|
What cert is required for Apple IOS devices to enroll? |
APNs Cert (Apple Push Notification service) cert. |
|
What is the SSL Listener cert used for? |
It's a public cert, typically a wildcard cert, used to authenticate the connection with the mobile devices. |
|
What are the remaining 3 configuration items? |
1. Netscaler Gateway (optional) 2. LDAP Configuration (optional) 3. Notification server (optional) |
|
What are all 5 configuration items? |
1. Licenses 2. Certificates (optional) 3. Netscaler Gateway (optional) 4. LDAP Configuration (optional) 5. Notification server (optional) |
|
Where can you view cluster information in the console? |
Wrench in upper right (support), then Advanced/Cluster information. |
|
Where in the console do you apply updates? |
Gear in upper right (settings), Release Management. |
|
Which XenMobile server do you update first? |
The primary. |
|
Where do you configure RBAC, to give AD users and groups admin access to the Xenmobile console? |
Settings (Gear in upper right), Settings/Role-based Access Control. |