Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
30 Cards in this Set
- Front
- Back
Six Windows editions
|
■ Starter
■ Home Basic ■ Home Premium ■ Professional ■ Enterprise ■ Ultimate |
|
Max Memory 64 bis Professiona, Etnerprise and Ultimate
|
128 Gbyte
|
|
Steps to move Windows 7 installations files to USB
|
diskpart
listdisk select disk X (X usb device) clean create partition primary format fs=fat32 quick |
|
Using a Network Share as an Installation Source
|
You can use it when you do not have AD
|
|
To access a WDS server
|
a computer must have a PXE-compliant network card or boot from a WDS discover image
|
|
Unattended installation
|
You can perform an unattended installation of Windows 7 by using an installation fi le called Unattend.xml. These installation fi les store answers to the questions asked by the Setup Wizard
|
|
Factores to considered when you need to boot two OS
|
install operating systems in the order that they were released
|
|
When is possible to boot from VHD?
|
only on computers that have a Windows 7 or Windows Server 2008 R2 boot environment.
|
|
SEt the default partition
|
bcdedit /enum
bcdedit /default |
|
A large benefi t of upgrading from one operating system to the next
|
all user data and applications that were present on the previous operating system are present on the upgraded operating system.
|
|
Very important step to migrate from Windows Vista to Windows 7
|
Run the Windows 7 Upgrade Advisor
|
|
You should keep the following in mind prior to and during the upgrade from Windows Vista to Windows
|
Perform a full backup of the computer running Windows Vista prior to performing the
installation. That way, if things go wrong, you can do a full restore back to Windows Vista. ■ You must ensure that Windows Vista has Service Pack 1 or later installed before you can upgrade it to Windows 7. ■ Ensure that you have the Windows 7 product key prior to the upgrade. ■ You cannot upgrade between processor architectures. An x86 version of Windows Vista cannot be upgraded to an x64 version of Windows 7, and vice versa. ■ You can upgrade only to an equivalent or higher edition of Windows 7. You can upgrade Windows Vista Home Premium to Windows 7 Home Premium, Professional, Enterprise, or Ultimate, but not to Windows 7 Starter. Windows 7 Professional is equivalent to Windows Vista Business. ■ Ensure that there is at least 10 GB of free disk space on the Windows Vista volume prior to attempting the upgrade. |
|
Migration from previos version with hardware problem
|
If the source computer’s hardware is not suffi cient to
support Windows 7, you need to perform a side-by-side migration. |
|
Side-by-Side Migrations
|
You use side-by-side migrations when you need to move user data from one computer to another. Depending on the migration method you use, you may need to ensure that both computers are turned on during the migration.
|
|
Wipe-and-Load Migrations
|
Wipe-and-load migrations involve exporting user data from a machine to an external location, such as a USB storage device or network share, removing the existing operating system,
performing a clean installation |
|
three separate methods that you can use to migrate data with Windows Easy Transfer.
|
Easy Transfer Cable
Network External Hard Disk or USB Flash Drive |
|
Windows easy transfer
|
If you want to migrate only a single user account, you can log on with that account to perform the transfer. If you want to migrate all accounts on the computer, you need to log on with a user account that has local administrator privileges.
|
|
Which Windows Easy Transfer method should you use when you want to perform
a wipe-and-load migration? |
The only Windows Easy Transfer method that supports wipe-and-load migrations is the External Hard Disk or USB fl ash drive method.
|
|
User State Migration Tool
|
USMT 4.0 is a command-line utility that allows you to automate the process of user profi le migration. The USMT is part of the Windows Automated Installation Kit (WAIK)
|
|
USMT migration occurs in two phases
|
exporting profi le data from the source computer using ScanState and importing profi le data on the destination computer using LoadState
|
|
You cannot use USMT
|
to migrate mapped network drives, local printers, device drivers, passwords, shared folder permissions, and Internet connection sharing settings.
|
|
USMT AND DOWNGRADES
|
You cannot use the USMT to migrate data from computers running Windows 7 to computers running Windows XP.
|
|
There are four different .xml migration fi les used with the USMT:
|
MigApp.xml
MigUser.xml MigDocs.xml Confi g.xml |
|
ScanState
|
You run ScanState on the source computer during the migration
Running ScanState and LoadState with the /v:13 option creates a detailed log fi |
|
LoadState
|
LoadState is run on the destination computer. You should install all applications that were on the source computer on the destination before you run LoadState.
|
|
Migration Store Types
|
Uncompressed
Compressed Hard-link |
|
Compressed
|
A compressed migration store is a single image fi le that contains all data being migrated.
The image fi le can be encrypted and password-protected |
|
Hard-link
|
Hard-link migration stores are used in wipe-and-load scenarios only. The hard-link migration store is stored on the local computer while the old operating system is removed and the new operating system is installed
Hard-link migrations require only 250 MB of free space on the volume being migrated, regardless of the amount of profi le data being migrated. |
|
Performing Offl ine Migrations
|
Offl ine migrations involve booting the computer into a Windows PE environment that includes the USMT fi les and then running ScanState against the installation of Windows on the computer’s hard disk drive.
|
|
advantage of offl ine migrations
|
person performing the migration does not need administrator access to the computer on which they are performing the migration.
|