Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
45 Cards in this Set
- Front
- Back
|
(001) ENLISTED AIR FORCE SPECIALTY QUALIFICATIONS ARE LISTED IN WHICH AIR FORCE MANUAL?
A. AFMAN 23-110, USAF SUPPLY MANUAL B. AFMAN-2302308, MATERIAL CLASSIFICATION C. AFMAN-36-123, SUPPLY MANUAL D. AFMAN 36-2108, ENLISTED CLASSIFICATION |
D. AFMAN 36-2108, ENLISTED CLASSIFICATION
|
|
|
(002) IN ORDER TO QUALIFY FOR ASSIGNMENT UNDER THE WHOLESALE LOGISTICS PROGRAM, PROGRAM NOMINEES MUST MEET ALL OF THE FOLLOWING EXCEPT
A. HAVE A 2S071 CONTROL AFSC B. HAVE LESS THAN 15 YEARS TIME IN SERVICE C. BE RECOMMENDED BY THEIR WING COMMANDER D. POSESS THE RANK OF TECHNICAL OR MASTER SERGEANT |
C. BE RECOMMENDED BY THEIR WING COMMANDER
|
|
|
(003) WHICH RELEVELING FLAG IS USED ON A REQUIREMENTS COMPUTATION INQUIRY TO PROVIDE A SUMMARY OF INFORMATION ABOUT A GIVEN STOCK NUMBER?
A. C B. D C. F D. R |
D. R
|
|
|
(004) WHEN YOU RECEIVE A REJECT BECAUSE OF PROCESSING A TRANSACTION, YOU SHOULD
A. TRY TO REINPUT THE EXACT SAME WAY B. IMMEDIATELY NOTIFY COMPUTER OPERATIONS C. FIRST ENSURE YOU HAVE INPUT THE DATA CORRECTLY D. NOTIFY YOUR FLIGHT CHIEF, ATER FIRST NOTIFYING COMPUTER OPERATIONS |
C. FIRST ENSURE YOU HAVE INPUT THE DATA CORRECTLY
|
|
|
(004) WHICH PROGRAM TAKES CARE OF SUPPLY COMPUTER PROCESSING WHEN AN ERROR IS DETECTED DURING PROCESSING OF A TRANSACTION?
A. REJECT B. INQUIRY C. MANAGEMENT NOTICE D. MANAGEMENT SUPPORT |
A. REJECT
|
|
|
(005) WHAT IS THE NAME OF THE PROCESS THAT REMOVES ERRONEOUS DATA FROM THE SBSS DATABASE?
A. DELINQUENT PROCEDURES B. ORGANIZATION REFUSALS C. QUALITY CONTROL D. REVERSE-POST |
D. REVERSE-POST
|
|
|
(006) HOW MANY INPUTS CAN YOU PROCESS AT ONE TIME USING THE AUTOMATED REVERSE-POST PROGRAM?
A. 1 B. 2 C. 3 D. 4 |
A. 1
|
|
|
(006) WHAT FREEZE CODES WILL ALLOW A REVERSE-POST INPUT TO PROCESS?
A. Q,I, AND C B. Q, L AND C C. S, L, AND C D. Q, AND P ONLY |
A. Q,I, AND C
|
|
|
(006) WHAT DO YOU DO WITH THE PRE-FILLED DATA ON AN AUTOMATED REVERSE-POST INPUT?
A. SIMPLY PROCESS THE TRANSACTION B. SCREEN FOR ACCURACY AND INPUT C. SCREEN FOR ACCURACY AND REFORMAT IT D. REMFORMAT IT AND PROCESS THE TRANSACTION |
B. SCREEN FOR ACCURACY AND INPUT*
|
|
|
(007) WHICH TYPE OF SUPPLY INTERFACE SYSTEM FILES GIVES USERS THE CAPABILITY TO RE-DIRECT SPECIFIED TRANSACTION IDENTIFICATION CODES OR PROGRAM OUTPUT TO A FILE OF THEIR CHOICE?
A. USER B. CONTROL C. RESIDUE D. DATA DIRECTION |
A. USER*
|
|
|
(007) SUPPLY INTERFACE SYSTEM RESIDUE IMAGES ARE CONSIDERED DELINQUENT AFTER HOW MANY HOURS?
A. 12 B. 24 C. 36 D. 48 |
B. 24*
|
|
|
(011) BY WHICH WORKDAY OF THE MONTH DOES THE AUTOMATED DATA SYSTEMS (ADS) SCHEDULER PREPARE AND DISTRIBUTE A FORECAST OF ALL KNOWN SBSS JOBS TO BE RUN THE FOLLOWING MONTH?
A. 5TH B. 10TH C. 15TH D. 20TH |
B. 10TH*
|
|
|
(008) WHICH SYSTEM IS AN AFMC ADVANCED AUTOMATED COMPUTER SYSTEM DESIGNED TO HELP MONITOR, MANAGE, AND IMPROVE WEAPON SYSTEM SUPPORT?
A. TRACKER B. RAMPS C. WSMIS D. MIICS |
C. WSMIS*
|
|
|
(008) WHICH OF THE FOLLOWING POSITIONS IS NOT A WEAPON SYSTEM MANAGEMENT INFORMATION SYSTEM ACCESS LEVEL?
A. BASE PRIMARY POINT OF CONTACT B. HQ AFMC FUNCTIONAL MANAGER C. MAJCOM PRIMARY POINT OF CONTACT D. MAJCOM ALTERNATE POINT OF CONTACT |
A. BASE PRIMARY POINT OF CONTACT*
|
|
|
(009) WHICH STANDARD BASE-LEVE COMPUTER CONTROL STATEMENT REMOVES UNDESIRED OR DELETED ELEMENTS IN THE SPECIFIED FILES AND REWRITES EACH FILE?
A. @PRT B. @PACK C. @COPY D. @DELETE |
B. @PACK*
|
|
|
(009) WHICH CONTROL STATEMENT CHANGES KEYS AND MODES OF CATALOGED MASS STORAGE FILES AND CHANGES ELEMENT AND VERSION NAMES IN A PROGRAM FILE?
A. @CHG B. @COPY C. @DELETE D. @PACK |
A. @CHG*
|
|
|
(009) ON THE STANDARD BASE LEVEL COMPUTER, WHICH CONTROL STATEMENT PROVIDES A MEANS OF INSERTING IMAGES INTO A RUNSTREAM FROM ANY FILE CUREECTLY ASSIGNED TO THE USER?
A. @ADD B. @MERGE C. @SET D. @COPY |
A. @ADD*
|
|
|
(009) ON THE STANDARD BASE LEVEL COMPUTER SYSTEM, WHICH GANG IS NOT USED FOR PROCESSING ONLINE TRANSACTIONS?
A. 2 B. 3 C. 4 D. 5 |
D. 5*
|
|
|
(010) WHAT GANG MUST BE USED BY AN SBSS ACCOUTN IF GANG TWO IS USED AS ITS PRIMARY DATA?
A. 2 B. 4 C. 6 D. 8 |
C. 6*
|
|
|
(007) Which type of Supply Interface System is designed to ensure an inbound or outbound images that could not be idenitifed or dispactched are cleared in a timely manner?
a. User b. Control c. Residue d. Data direction |
c. Residue
|
|
|
(012) A category III difficulty report does not stop processing and is corrected
a. as workload permits. b. on an AF suggestion form. c. in the next scheduled release. d. over the telephone with the Standard Base Supply System (SBSS) control center. |
c. in the next scheduled release.
|
|
|
(013) Which is a basic ground rule for conducting a surveillance visit to an accountable officer function?
a. Check in and out with the flight chief. b. Follow the standard AF directive for conducting such a visit. c. Submit a written report within 15 workdays of the exit briefing. d. Bypass areas that have not had deficiencies within the past three years. |
a. Check in and out with the flight chief.
|
|
|
(013) Where do you start your research before you conduct a surveillance visit of a function?
a. Base supply reports and records. b. Function's last surveillance report, c. Function's unit manning document, d. Directives that apply to the function. |
d. Directives that apply to the function.
|
|
|
(013) If you find deficiencies during a surveillance visit to a function, you must furnish a detailed written report to the flight chief within
a. 5 days after checking in. b. 15 days after checking in. c. 5 workdays after the exit briefing, d. 15 workdays after the exit briefing. |
c. 5 workdays after the exit briefing,
|
|
|
(013) A function that receives a surveillance visit report must send a reply within how many days of the date on the surveillance report?
a. 7. b. 10. c. 15. d. 30. |
c. 15.
|
|
|
(014) Who is the primary POC for special topics or subjects designated by the accountable officer?
a. Procedures, b. Accountability, c. Customer service, d. Flight chief. |
a. Procedures,
|
|
|
(014) Who does the final review of all proposed changes and suggestions before submission to higher headquarters?
a. Customer service, b. Procedures, c. LRS commander, d. Accountable officer. |
d. Accountable officer.
|
|
|
(015) Experience and standards data are factors used in which type of analysis?
a. Trend, b. Problem, c. Important, d. Performance. |
a. Trend,
|
|
|
(015) What analysis method do you use most often to satisfy a one-time requirement or solve a specific problem?
a. Special studies, b. Document, c. Problem, d. Trend. |
a. Special studies,
|
|
|
(016) A basic ingredient of any analysis program is
a. charts, b. opinions, c. a database, d. reliable and valid data. |
d. reliable and valid data.
|
|
|
(016) You should request "as required" computer products by using the
a. AF Form 2011, Base Supply ADPE Work Request. b. AF Form 2005, Issuc/Turn-in Request, c. DD Form 1530, Supply Request, d. telephone or message only. |
a. AF Form 2011, Base Supply ADPE Work Request.
|
|
|
(017) Management indicators can take what type of forms?
a. Subjective and informational, b. Informational and available, c. Quantitative or qualitative, d. Available or subjective. |
c. Quantitative or qualitative.
|
|
|
(017) What management indicators measure how well the supply system is responding to urgent requests by customers?
a. NMCS. b. Priority support, c. Expedite support, d. Warehouse storage. |
b. Priority support,
|
|
|
(018) The Air Force Supply Management Activity Group is designed to operate on what basis?
a. No-profit/no-loss, b. Profit/loss, c. No-profit, d. No-loss. |
a. No-profit/no-loss,
|
|
|
(018) What type of items are financed from the Supply Management Activity Group appropriations?
a. Merged, b. Expense, c. Wholesale, d. Investment. |
b. Expense,
|
|
|
(018) Which type of Supply Management Activity Group has assets at both retail and wholesale level?
a. Lateral, b. Vertical, c. Revolving, d. Horizontal. |
b. Vertical,
|
|
|
(018) The Material Support Division is responsible for what type of expense items?
a. Base funded, b. Capital controlled, c. Centrally procured, d. Locally manufactured. |
c. Centrally procured,
|
|
|
(019) How is a decision normally made on whether to give a customer a refund for the turn-in of property?
a. Externally by the flight chief, b. Automatically by the AGSOP. c. Externally by the accountable officer, d. Automatically under the SBSS program control. |
d. Automatically under the SBSS
|
|
|
(019) What credit code do you use to override program control and allow full credit for a Supply Management Activity Group item, regardless of stock position?
a. A. b. N. c. Y. d. D. |
c. Y.
|
|
|
(019) Who must approve the use of credit code "Y" in the Standard Base Supply System program control before processing a stock fund turn-in?
a. SMAG manager, b. Division SMAG officer, c. Accounting and finance, d. Maintenance or supply inspector. |
a. SMAG manager,
|
|
|
(007) What type of Supply Interface System files is disigned to ensure any inbound and outbound images that could not be id or dispacted are cleared in a timely manner?
a. User b. Control c. Residue d. Data Direction |
c. Residue
|
|
|
(009) The control statement on the standard base-level computer that causes accounting routines to be called and all facilities assigned to the run to be released is
a. @XQT b. @START c. @FIN d. @RUN |
c. @FIN
|
|
|
(009) Which standard base-level computer control statement helps manage the disk space and ensures that the space is used efficiently and effectively?
a. @ERASE b. @PACK c. @COPY d. @DELETE |
b. @PACK
|
|
|
(009) The monthly forecast is prepared and distributed by what day of the month?
a. 5th b. 10th c. 15th d. 20th |
b. 10th
|
|
|
(009) Which of the following IS NOT a type of schedule within the RPS Operations section?
a. Quarterly forecast b. Monthly forecast c. Daily operations schedule d. RPS operations schedule |
a. Quarterly forecast
|
