Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
Cutters Edge,
What is the Chain Brake? |
Stops the saw chain if activated while the saw chain is running or during idling, acts as a prking brake to prevent the saw chain from moving.
|
|
Cutters Edge,
What is the Chain Catcher? |
Located under the chain as far as is practically possible, and designed to catch a broken or jumping chain.
|
|
Cutters Edge,
Where is the KickBack Zone? |
The upper tip of the guide bar.
|
|
Cutters Edge,
Define KickBack: |
Sudden rearward motion of the saw can occur if the kickback zone of the bar touches an object.
|
|
Cutters Edge,
What is the direction of KickBack? |
A kickback alway travels in the plane of the bar.
|
|
Cutters Edge,
Define Rotational KickBack: |
Occurs when the kickback zone touches something, such as a trunk.
|
|
Cutters Edge,
Define Pinch KickBack: |
Pinching the saw chain along the top of the guide bar may push the saw back at you.
|
|
Cutters Edge,
How do you avoid KickBack? |
1. Use proper technique.
2. Don't use the kickback danger zone of the bar. 3. Use Proper grip. 4. Avoid unsave and off balance working conditions. 5. Cut at high speeds. |
|
Cutters Edge,
What is the proper grip? |
Right hand on the rear handle and the left hand on the front handle.
|
|
Cutters Edge,
How do you know the chain is tight enough? |
You should be able to turn the chain freely with one hand.
|
|
Cutters Edge,
When do you Lube the chain? |
Fill chain oil tank with oil each time you refuel.
|
|
Cutters Edge,
What does the D-6 Guard allow you to do? |
To set a specific depth of cut.
|
|
Cutters Edge,
What size bar does the D-6 fit? |
16 inch bar
|
|
Cutter Edge,
What is the D-6 max. cutting depth? |
6 inches
|
|
Cutters Edge,
What do you need to work on cutting a roof? |
1. secure work area
2. protective clothing 3. charged hose line 4. means of egress 5. hand tools |
|
Cutters Edge,
Where do you hold the saw while cutting? |
Hold the saw on one side of your body, locking your top elbow, if possible.
|
|
Cutters Edge,
What is the angle you use to cut? |
45 degrees
|
|
Cutters Edge,
How can you cut more than the D-6 will let you? |
Hold the saw at 90 degrees and it will cut up to 1/2" more.
|
|
Cutters Edge,
Fuel Mixture: |
High quality 2 cycle engine oil/ 50:1
|
|
Cutters Edge,
Cleaning: |
Wipe off all inner and outer surfaces of the D-6
|