• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/46

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

46 Cards in this Set

  • Front
  • Back
85. What is the maximum speed limit for heavy trucks on the highway at night?
65 MPH
Pg 8-3
86a. When should you coast in neutral when going down a steep grade in a heavy vehicle?
Never coast in neutral
Pg 9-26
86b. What gear should you use when going down a steep grade in a heavy vehicle?
Use a low gear
Pg 9-26
86c. How should you use brakes when going down a steep grade in a heavy vehicle?
Use brakes only as a supplement to engine braking, Pg 9-26
87a. When turning right in a vehicle which is too large to be turned by staying in the proper lane, what should the right rear wheels do?
Swing over the center of the side street, if necessary, so that right rear wheel clears the curb.
Pg 15-32
87b. When turning right in a vehicle which is too large to be turned by staying in the proper lane, how should you approach the corner?
Approach the corner in the proper lane, about four feet from the curb, then turn wide to the right.
Pg 15-32
88. How can farm tractors meet lighting requirements when operating on the highway at night?
a. At least two head lamps,
b. One red taillight (visible >1000 ft)
c. At least two red reflectors (visible 100-600 ft)
d.Hazard warning lights (flashers)
White or amber in front
Red or amber in rear Pg 9-13
89a. What are the vehicle size and weight requirements for non-CDL Class A driver license?
Class A driver license permits a person to drive any vehicle or combination of vehicles with a gross combination weight rating (GCWR) of 26,001 pounds or more, provided the gross vehicle weight rating (GCWR) of the vehicle(s) being towed is in excess of 10,000 pounds.
Pg 1-4
89b. What are the vehicle size and weight requirements for non-CDL Class B driver license?
Class B:
a.A vehicle with a GVWR of 26,001 pounds or more, towing a vehicle with a GCWR that does not exceed 10,000 pounds.
b. Bus with a seating capacity of 24 passengers or more including driver. Pg 1-4
89c. What are the vehicle size and weight requirements for Class C driver licenses (non-CDL)?
Class C: Vehicle with GVWR of less than 26,001 pounds, towing a trailer not to exceed 10,000 pounds GVWR.
Does not include motorcycle or moped. Pg 1-4
89d. What other vehicles can a person with a Class A license drive?
Class A driver license permits a person to drive a Class B vehicle or a Class C vehicle, except a motorcycle or moped. Pg. 1-4
89e. What other vehicles can a person with a Class B license drive?
Class B driver license permits a person to drive a Class C vehicle, except a motorcycle or moped. Pg. 1-4
90. What should be the first action of the driver of a disabled truck or bus?
The first thing the driver must do is put out the proper flares, flags,
or reflectors.” 15-2
91a. When necessary,where should flares be placed around a truck on a not divided (two way) highway ?
Three flares:
One 100’ in the front, One 100’ in the rear, One 10’ in the rear.
Pg 15-2
91b. When necessary,where should flares be placed around a truck on a divided highway ?
Three flares:
One 100’ in the front, One 200’ in the rear, One 10’ in the rear.
Pg 15-2
91c. When necessary,where should flares be placed around a truck when vision obscured?
Three flares:
One 100’ in the front, One less than 500’ in the rear, One 10’ in the rear.
Pg 15-2
92a. What is the required lighting on the rear of a semi-trailer 80 inches or more in width?
Two red tail lamps-one each side
Two red stop lamps-one each side
Two red reflectors-one each side
Electric turn signal lamps one on
each side at rear
Two red clearance lamps. Pg 15-6
92b. What is the required lighting on the front of a semi-trailer 80 inches or more in width?
Two amber clearance lamps. Pg 15-6
92c. What is the required lighting on the side of a semi-trailer 80 inches or more in width?
Front, Amber side marker lamps top and bottom
Rear, Red side marker lamps top and bottom
Intermediate side marker lamp and reflector required only on trailers
measuring 30 feet or more in length.
Pg 15-6
93. What are the height limits between which reflectors must be mounted?
Not less than 24 inches nor more than 60 inches in height above the ground.
Pg 15-3
94. What color should clearance lamps, side marker lamps, or reflectors mounted on or near the front of a vehicle be?
Amber
Pg 15-2
95. What is the greatest height allowed by state law for a vehicle including
its load?
14 feet from ground to the top of the load. Pg 15-28
96. What is the greatest weight allowed by state law for any vehicle including its load?
80,000 pounds Pg 15-28
97. What should be the greatest distance between two vehicles when one vehicle is towing the other?
Fifteen feet Pg 15-29
98. What should you do when hauling equipment that is wider, heavier, or
longer than the law permits?
Obtain an oversize/overweight permit through the Texas Department of Transportation Permit Office. Pg 15-28
99. When are turn indicator signals required on a vehicle?
Vehicles 80 inches in width or more manufactured after to model year 1960. Pg 2-2

(motorcycles and certain trailers
excepted)
100. Outside the city limits, what type of vehicle must stop at all railroad
crossings?
a. Buses carrying passengers for hire
b. All school buses
c. All super-heavy equipment; crawler type tractors, steam shovels, derricks, rollers, etc
d.Trucks carrying explosives or flammable liquids
e.Vehicles Transporting Hazardous Materials. Pg 15-31
101. What types of vehicles are required to have mud flaps?
All trucks and trailers with four or more tires on the rear axle. Pg 15-13
102. What is the maximum speed limit for a taxicab on a numbered U.S. or state highway during the day?
70 mph PG 8-3
103. What is the maximum speed limit for motorbuses at night on numbered U.S. and state highways?
65mph Pg 8-3
104. What are the limits on load extensions over the front and rear of vehicles?
Three feet beyond the front.
Four feet beyond the rear.
Pg 15-29
105. What is the safest method to use when backing a large truck?
a. Get out and walk around your truck and make certain there is nothing behind.
b. Use both rear view mirrors.
c. If necessary to back some distance, stop part way, then get out and check your progress.
d. Try to have someone standing in a safe place to guide you by signaling
f. Never back around an intersection corner to turn around.
g. If you have to back in or out of a driveway, where possible, back into
the driveway from the street.
h. When backing over a sidewalk into a street, stop at the sidewalk to make especially certain that there is no child playing behind or close by. Stop again at the curb.
i. Don’t depend entirely upon your rear vision mirror. Pg 15-32
106. What is the purpose of requiring registration papers on trucks at all
times?
These papers will show the weight of the vehicle empty and how much it is registered to haul. Pg 15-1
107. All school buses, taxis, and other vehicles hauling passengers for hire must carry a chemical-type fire extinguisher of at least what capacity?
At least one quart capacity. Pg 15-2
108. What are the requirements concerning clearance lights on trucks and buses?
Two Amber in Front, Two Red in Rear, Pg 15-8 & 15-10
109. Every trailer, semi-trailer, or pole-trailer must have how many reflectors on the rear?
Two red reflectors-one each side.
Pg 15-10
110. Mounted reflectors must be at least how many inches above the
ground?
Not less than 24 inches nor more than 60 inches in height above the ground.
111. Clearance lamps mounted on or near the rear of a vehicle must be what
color?
Red
Pg15-4 and 5-11
112. Clearance lamps mounted on or near the rear of a vehicle must be what
color?
Red

Pgs15-4 and 5-11
113. What is the greatest width ordinarily allowed by state law for a vehicle on the highway?
102 inches in width.
Pg 15-28
114. What usually determines the number of trailers that may ordinarily be pulled by one vehicle?
No more than three vehicles or towing devices may be operated in a combination. Pg 15-28
115. What is the greatest length ordinarily allowed by state law for any combination of truck and trailer?
65 feet. Pg 15-28
117. When towing another vehicle with a chain or cable, the flag which is
attached to the chain or cable must be what color?
A white flag not less than twelve inches square. Pg 15-29
118. When one truck is following another truck or vehicle it must keep far enough back to allow how many vehicles to safely enter between them?
One (far enough back to allow "another" vehicle)

Pg 15-31
119. When mud flaps are required on a vehicle, they must come within how
many inches of the surface?
Within 8 inches of the surface of the highway. Pg 15-13
120. What are the regulations regarding lugs and flanges on Texas state highways?
Unlawful, A tire may not have on its periphery a block, cleats, lugs, flanges, studs. Pg 15-14