Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
4 Cards in this Set
- Front
- Back
|
State the type/model engine used on the E-2C aircraft
|
group 0 T56-A-425
I/II/NavUp T56-A-427 |
|
|
State the type and model of engine used on the C-2A aircraft
|
Two Allison T56-A-425 turboprop
|
|
|
State the five forces acting on a propeller
|
centrifugal force, aerodynamic twisting, thrust bending, torque bending, centrifugal twisting
CATTC |
|
|
Discuss proper fueling and defueling methods
|
1. ground aircraft
2. close CB's 3. connect power 4. open fueling door 5. before removing adapter cap ground hose nozzle 6. remove adapter insert nozzle, and lock 7. start fueling 8. when full "not full" lights go out fueling stops 9. partial need monitor 10. turn off fuel, remove nozzle install cap 11. remove grounding cable 12. close secure fuel door Defueling follow 1-6, use negative pressure of 1-2 psi, stop when 4 gallons of fuel remain in each tank. then follow 10-12 |
