Sound Design

Front 1

⌘ - 1

Back 1

Zoomer Tool

Front 2

⌘ - 2

Back 2

Trim Tool

Front 3

⌘ - 3

Back 3

Selector Tool

Front 4

⌘ - 4

Back 4

Grabber Tool

Front 5

⌘ - 5

Back 5

Scrubber Tool

Front 6

Shift - Tab

Back 6

Extend Selection to end of clip

Front 7

Option-Shift-Tab

Back 7

Extend Selection to beginning of clip

Front 8

Cntrl > Click On Clip with Grabber

Back 8

Snap region start to stationary play head

Front 9

Cntrl - ⌘ - Click Clip With Grabber

Back 9

Snap region end to stationary playhead

Front 10

Cntrl-Optn-Click Clip w/Grabber

Back 10

?

Front 11

Cntrl-⌘-Option-Click Clip w/Grabber

Back 11

?

Front 12

⌘ - X

Back 12

Cut

Front 13

⌘ - C

Back 13

Copy

Front 14

⌘ - V

Back 14

Paste

Front 15

Optn - ⌘ - V

Back 15

Paste Special repeat to fill section?

Front 16

⌘ - F

Back 16

Fadezz

Front 17

⌘ - E

Back 17

Separate

Front 18

⌘ - T

Back 18

Trim Clip to Selection

Front 19

+/- Numeric Keyboard

Back 19

Frame by frame

Front 20

3 on Numeric Keyboard

Back 20

Record Enable???

Front 21

Sampling Rate

Back 21

Resolution of the Sound

Front 22

Nyquist theorem

Back 22

Aliasing

Front 23

How Many DB's per bit in high res audio

Back 23

6DB

Front 24

How we store measurements of sound????

Back 24

Bit Depth

Front 25

Stereophonic Sound

Back 25

2 Channels or More

Front 26

Fletcher

Back 26

Father of Stereophonic Sound

Front 27

Stakovsky

Back 27

Worked with Disney and brought 5.1 surround to the forefront through Fantasia.

Front 28

Les Paul

Back 28

Founder of time expansion and compression, the 8-track, flanging, chorusing, Inventor of Reverb Chamber

Front 29

Armstrong

Back 29

Amplifier, FM radio

Front 30

Faraday

Back 30

?

Front 31

Temporal Fusion

Back 31

Reverb? Two sounds within 30 miliseconds create resonant tones

Front 32

Dialogue

Back 32

Center Channel

Front 33

Reverb

Back 33

Makes it easier to blend music.

Front 34

We always hear. We do not always listen.

Back 34

True

Front 35

Hertz is the unit of measurement that describes:

Back 35

Frequency

Front 36

When a sound is sampled that contains frequencys that are greater than half the sampling rate of the recording, it will cause an unpleasant effect called aliasing

Back 36

True

Front 37

The average frequency response of human hearing is approximately

Back 37

20 Hz to 20,000 Hertz

Front 38

it is generally the goal of Sound design to direct our attention and manipulates our emotions without us being aware of it's influence.

Back 38

True

Front 39

Resulting waves are the combination of all frequencies of a sound, interacting in the air at the point it is heard.

Back 39

True

Front 40

When working on a feature film's final mix, non-recognizable English language wallas (or crowd) will be mixed to.

Back 40

FX

Front 41

Balanced lines are needed for high impedance signals.

Back 41

False

Front 42

A 200 Hertz sound wavelength is shorter than a 1200 Hertz sound wavelength.

Back 42

False

Front 43

In the Soundworks Collection's piece on Scott Prilgrim the showed how they could use diegetic sound like microphone feedback, to orchestrate the whip pans in a seen.

Back 43

True

Front 44

Perceived Loudness is based on the principles expressed with the "Fletcher Munson" curve.

Back 44

True

Front 45

In clips form "Lucky Number Sleven" and "Push", the importance of the dialogue pre-dub was demonstrated.

Back 45

True

Front 46

The term “Dynamic Range” describes

Back 46

scale of sound from soft to loud

Front 47

We primarily localize sounds based on phase relationships (Arrival Times).

Back 47

True

Front 48

A microphone cable that is next to a cable that carries AC power may have a sixty cycle tone induced into it because the magnetic field expands and collapses 120 times a second.

Back 48

True

Front 49

he dispersal of energy like an expanding balloon over an increasingly broader area is described in:

Back 49

Inverse Square Law

Front 50

In order for complete phase cancellation to occur, two identical signals must be:

Back 50

180 out of phase

Front 51

Phase relationships determine the frequency of a sound.

Back 51

False

Front 52

In production sound recording it is best to use a microphone that uses an omni polar pattern.

Back 52

False

Front 53

Humans ability to perceive the mid range frequencies in relationship to high or low frequencies, changes with the loudness (the decibel level at which the matirial is being monitored) of the program, this phenomena has been displayed in:

Back 53

Equal Loudness Curve

Front 54

Foley and stems make foreign language versions of the film possible.

Back 54

True

Front 55

The positive and negative amplitudes in a sign wave represent the increase and rarefication of air pressure.

Back 55

True

Front 56

If one is distorting the audio within the condenser microphone, one can lower the volume to one third, if one moves the mic twice the distance from the source.

Back 56

False

Front 57

A transducer that does not use electromagnetic induction to change a signal between acoustic and electrical is a

Back 57

Condensor Mic

Front 58

In the clip from "His Girl Friday" we saw how Dialog was capable of conveying rhythmic and musical expression.

Back 58

True

Front 59

The sampling rate and bit depth for “CD quality” audio is:

Back 59

44.1kHz @ 16 bit

Front 60

As discuses in class, a tree falling in the forest, that is not heard, does not makes a noise.

Back 60

True

Front 61

By creating a feeling of space and depth in the sound track it expands the three dimensional experience of the picture.

Back 61

True

Front 62

A low impedance signal can not travel long distances.

Back 62

False

Front 63

When Faraday first connected his devise it generated a current. When he turned it off, the devise generated a current in the opposite direction. While it was on it did not generate any current.

Back 63

True

Front 64

Two identical waves that meet 180 degrees out of phase will create a 3DB increase in amplitude

Back 64

False

Front 65

In the SoundWorks Collections video on "Inception", the pre-dubs for the deterioration of the dream scene showed how whales sounds where used to make the scene scary.

Back 65

True

Front 66

Phantom Power is used to energize a dynamic Microphones

Back 66

False

Front 67

When digitizing audio, samples measure the amplitude of the signal at precise intervals

Back 67

True