• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/3

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

3 Cards in this Set

  • Front
  • Back


SEC 450 Final Exam



http://www.fres-courses.com/product/sec-450-final-exam

SEC 450 Final Exam


1. (TCO 5) MPLS uses constraint-based routing. Which of the following variables is NOT considered with MPLS?


2. (TCO 5) Which one of the following is NOT an EDI standard that is used, as mentioned in the course textbook?


3. (TCO 5) What does SMTP stand for?


4. (TCO 5) Which of the following is NOT an interior gateway routing protocol?


5. (TCO 6) Which of the following is a compelling reason for convergence


6. (TCO 6) Which of the following is NOT one of the disruptive influences on the telecommunications industry?


1. (TCO 1) Which of the following contains ALL the correct issues involved in network security, as stated by the textbook?


2. (TCO 1) Which of the following includes all of the issues involved in a data network facility selection, according to the textbook?


3. (TCO 1) Which of the following is NOT a WAN application issue that data network applications can be separated into?


4. (TCO 2) Which term correctly matches the following definition, as stated in the course textbook?
After the session is set up, the protocol controls the traffic flow and data integrity across the datalink


5. (TCO 2) Which term correctly matches the following definition, as stated in the course textbook?
Every session requires an address to set up a connection if the protocol is connection oriented or to route packets if it is connectionless. Not all protocols contain addresses. Many of them rely on higher or lower layers for addressing


6. (TCO 2) Which term correctly matches the following definition, as stated in the course textbook?
In data networks that have multiple routes to the destination, the protocol determines the appropriate route based on such conditions as cost, congestion, distance, and type of facility


7. (TCO 3) Which layer of the OSI model is responsible for end-to-end routing


8. (TCO 3) IEEE 802.3 is otherwise known as which of the following


9. (TCO 3) What are the two primary criteria that characterize DSL


10. (TCO 4) Fiber-optic system design is a balance between capacity requirements and costs, which include the cable, terminal equipment, regenerators and amplifiers, and construction and engineering. Identify the three primary criteria for evaluating a system


11. (TCO 4) Which one of the following terms matches the description below?
System gain in fiber optics is the algebraic difference between transmitter output power and receiver sensitivity. For example, a system with a transmitter output of -5 dBm and a receiver sensitivity of -40 dBm has a system gain of 35 dB. From the system gain, designers compute a loss budget, which is the amount of cable loss that can be tolerated within the available system gain


12. (TCO 5) The following description matches which term below?
The X.500 protocol is too cumbersome for many organizations to use, but some method of maintaining directories is required. Every organization has its internal directory, often printed on paper and usually obsolete before it can be distributed. Online directories are the preferred method because they can be updated daily if necessary. An online directory is easy for people to use, but it needs structure to be used in machine communications. Applications must be able to find someone regardless of location to send an e-mail, instant message, or voice call


7. (TCO 1) Explain the term enterprise network


9. (TCO 3) Briefly describe the guidelines of a feasibility study


10. (TCO 4) Please explain why a company would create an RFP. Specifically, feel free to include any other important elements of an RFP in your answer


11. (TCO 5) What is an operations plan/strategy? Why is it important? Briefly discuss the following three factors that you should consider in developing your plan: organizational strategy, cost, and time.


12. (TCO 6) What does convergence mean in the telecommunications industry? Do you agree with the idea of convergence? Why or why not? Will this convergence result in better products, better options, and better prices for the consumers? (State briefly in two or three paragraphs.)



SEC 450 Final Exam



http://www.fres-courses.com/product/sec-450-final-exam

SEC 450 Final Exam


1. (TCO 5) MPLS uses constraint-based routing. Which of the following variables is NOT considered with MPLS?


2. (TCO 5) Which one of the following is NOT an EDI standard that is used, as mentioned in the course textbook?


3. (TCO 5) What does SMTP stand for?


4. (TCO 5) Which of the following is NOT an interior gateway routing protocol?


5. (TCO 6) Which of the following is a compelling reason for convergence


6. (TCO 6) Which of the following is NOT one of the disruptive influences on the telecommunications industry?


1. (TCO 1) Which of the following contains ALL the correct issues involved in network security, as stated by the textbook?


2. (TCO 1) Which of the following includes all of the issues involved in a data network facility selection, according to the textbook?


3. (TCO 1) Which of the following is NOT a WAN application issue that data network applications can be separated into?


4. (TCO 2) Which term correctly matches the following definition, as stated in the course textbook?
After the session is set up, the protocol controls the traffic flow and data integrity across the datalink


5. (TCO 2) Which term correctly matches the following definition, as stated in the course textbook?
Every session requires an address to set up a connection if the protocol is connection oriented or to route packets if it is connectionless. Not all protocols contain addresses. Many of them rely on higher or lower layers for addressing


6. (TCO 2) Which term correctly matches the following definition, as stated in the course textbook?
In data networks that have multiple routes to the destination, the protocol determines the appropriate route based on such conditions as cost, congestion, distance, and type of facility


7. (TCO 3) Which layer of the OSI model is responsible for end-to-end routing


8. (TCO 3) IEEE 802.3 is otherwise known as which of the following


9. (TCO 3) What are the two primary criteria that characterize DSL


10. (TCO 4) Fiber-optic system design is a balance between capacity requirements and costs, which include the cable, terminal equipment, regenerators and amplifiers, and construction and engineering. Identify the three primary criteria for evaluating a system


11. (TCO 4) Which one of the following terms matches the description below?
System gain in fiber optics is the algebraic difference between transmitter output power and receiver sensitivity. For example, a system with a transmitter output of -5 dBm and a receiver sensitivity of -40 dBm has a system gain of 35 dB. From the system gain, designers compute a loss budget, which is the amount of cable loss that can be tolerated within the available system gain


12. (TCO 5) The following description matches which term below?
The X.500 protocol is too cumbersome for many organizations to use, but some method of maintaining directories is required. Every organization has its internal directory, often printed on paper and usually obsolete before it can be distributed. Online directories are the preferred method because they can be updated daily if necessary. An online directory is easy for people to use, but it needs structure to be used in machine communications. Applications must be able to find someone regardless of location to send an e-mail, instant message, or voice call


7. (TCO 1) Explain the term enterprise network


9. (TCO 3) Briefly describe the guidelines of a feasibility study


10. (TCO 4) Please explain why a company would create an RFP. Specifically, feel free to include any other important elements of an RFP in your answer


11. (TCO 5) What is an operations plan/strategy? Why is it important? Briefly discuss the following three factors that you should consider in developing your plan: organizational strategy, cost, and time.


12. (TCO 6) What does convergence mean in the telecommunications industry? Do you agree with the idea of convergence? Why or why not? Will this convergence result in better products, better options, and better prices for the consumers? (State briefly in two or three paragraphs.)



SEC 450 Final Exam



http://www.fres-courses.com/product/sec-450-final-exam

SEC 450 Final Exam


1. (TCO 5) MPLS uses constraint-based routing. Which of the following variables is NOT considered with MPLS?


2. (TCO 5) Which one of the following is NOT an EDI standard that is used, as mentioned in the course textbook?


3. (TCO 5) What does SMTP stand for?


4. (TCO 5) Which of the following is NOT an interior gateway routing protocol?


5. (TCO 6) Which of the following is a compelling reason for convergence


6. (TCO 6) Which of the following is NOT one of the disruptive influences on the telecommunications industry?


1. (TCO 1) Which of the following contains ALL the correct issues involved in network security, as stated by the textbook?


2. (TCO 1) Which of the following includes all of the issues involved in a data network facility selection, according to the textbook?


3. (TCO 1) Which of the following is NOT a WAN application issue that data network applications can be separated into?


4. (TCO 2) Which term correctly matches the following definition, as stated in the course textbook?
After the session is set up, the protocol controls the traffic flow and data integrity across the datalink


5. (TCO 2) Which term correctly matches the following definition, as stated in the course textbook?
Every session requires an address to set up a connection if the protocol is connection oriented or to route packets if it is connectionless. Not all protocols contain addresses. Many of them rely on higher or lower layers for addressing


6. (TCO 2) Which term correctly matches the following definition, as stated in the course textbook?
In data networks that have multiple routes to the destination, the protocol determines the appropriate route based on such conditions as cost, congestion, distance, and type of facility


7. (TCO 3) Which layer of the OSI model is responsible for end-to-end routing


8. (TCO 3) IEEE 802.3 is otherwise known as which of the following


9. (TCO 3) What are the two primary criteria that characterize DSL


10. (TCO 4) Fiber-optic system design is a balance between capacity requirements and costs, which include the cable, terminal equipment, regenerators and amplifiers, and construction and engineering. Identify the three primary criteria for evaluating a system


11. (TCO 4) Which one of the following terms matches the description below?
System gain in fiber optics is the algebraic difference between transmitter output power and receiver sensitivity. For example, a system with a transmitter output of -5 dBm and a receiver sensitivity of -40 dBm has a system gain of 35 dB. From the system gain, designers compute a loss budget, which is the amount of cable loss that can be tolerated within the available system gain


12. (TCO 5) The following description matches which term below?
The X.500 protocol is too cumbersome for many organizations to use, but some method of maintaining directories is required. Every organization has its internal directory, often printed on paper and usually obsolete before it can be distributed. Online directories are the preferred method because they can be updated daily if necessary. An online directory is easy for people to use, but it needs structure to be used in machine communications. Applications must be able to find someone regardless of location to send an e-mail, instant message, or voice call


7. (TCO 1) Explain the term enterprise network


9. (TCO 3) Briefly describe the guidelines of a feasibility study


10. (TCO 4) Please explain why a company would create an RFP. Specifically, feel free to include any other important elements of an RFP in your answer


11. (TCO 5) What is an operations plan/strategy? Why is it important? Briefly discuss the following three factors that you should consider in developing your plan: organizational strategy, cost, and time.


12. (TCO 6) What does convergence mean in the telecommunications industry? Do you agree with the idea of convergence? Why or why not? Will this convergence result in better products, better options, and better prices for the consumers? (State briefly in two or three paragraphs.)