Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
17 Cards in this Set
- Front
- Back
CO (CA)
|
Conflict Alert
Suspends or restores conflict alert flash for 10 seconds. EX: CO slew on dot(enter) |
|
QA (AUTO)
|
Auto Hand
Inhibits/Enables automatic handoffs or EX: QA 000(enter) This key has nothing to do with forcing a hand off!!! The symbol ^ will show up above the 2nd character in the AID for aircraft that aren’t in automatic H/O status This will be used when we do point outs with LNK or Coordinate for some BIE depatures |
|
QB (CODE)
|
Code
Used to request a discrete beacon code to assign to aircraft in your airspace (mostly VFR) EX: QB N12345(enter) |
|
QD (CRD)
|
CRD
Effects information displayed in the R CRD Altitude limits are established for PVD display EX: QD 000B242(enter) Displays up to 6 airport altimeters on R-CRD EX: QD GRI OMA OLU LNK(enter) These two entries are required for your scope set up and can be combined QD 000B242 GRI OMA OLU LNK(enter) |
|
QF (FR)
|
FP Readout
|
|
QH (HOLD)
|
Hold
Allows hold information, including the fix to be entered into the hold list EFC can also be entered to alert a controller when aircraft is expecting to leave holding EX: QH OBH 1010 CID(enter) |
|
QP (PVD) (HALO)
|
PVD
Displays or removes a five mile J-Ball around an identified target EX: QP J 213 (enter) EX: QP J (slew) (enter) |
|
QQ (INT)
|
Interim Altitude
An interim altitude is inserted or removed from aircraft data block EX: QQ 090 000(enter) QQ 000 (Enter) Altitudes must be in three digits |
|
QR (RPT)
|
Report
Allows pilot reported altitude to be entered for non mode C aircraft EX: QR 090 AID (enter) Altitude has to be in 3 digits You will enter this for /T/U/X aircraft after you get a pilot reported |
|
QT (CST) (TRK)
|
Track
Full data block is displayed and NAS starts tracking the identified aircraft. Restarts track of dropped aircraft EX: QT (slew) (pick)000(enter) |
|
QU (RTE)
|
Route
Aircraft’s route can be changed and route line displays change on scope Aircraft flight plan route is displayed on the PVD per the number of minutes entered EX: QU 45 213 (enter) An “X” on the end of the route line indicates that location as the landing airport |
|
QX (DROP TRK)
|
Cancel
To limit/stop track on a particular target Drops aircraft track or changes from full to limited data block: EX: QX AID(enter) |
|
QZ (ALT)
|
Assigned Altitude
Updates assigned altitude in data block EX: QZ 230 000(enter) Altitudes must be in three digits |
|
SG
|
Suppression
|
|
QL (LOOK)
|
Quick Look
Controllers can see full data blocks of aircraft in up to 5 sectors within their facility EX: QL 27 37 39(enter) To turn this feature off QL(enter) |
|
SR
|
Strip Request
Allows you to request a strip Different format: SR_CID_Strip # or Location_Sector # (enter) SR 002 OBH 26(enter) SR 003 01 26(enter) |
|
DM
|
Departure message
Enters a departure message for aircraft Activates Departures in NAS System Time and/or new assigned altitude can be included Format : DM 002(enter) or DM 3232 1743(enter) DM 001 110(enter) |